Loading
Loading…
Loading…
Tender Value
₹52.5 L
EMD Value
₹1.1 L
Closing Date
25 Sept 2026, 12:00 pm4d left
Er. Gurpreet Singh Bains
Executive Engineer, Electrical Division No. 2, 1st Floor Additional Deluxe Building Sector- 9/D, Chandigarh.
As per NIT
2026_CHD_95420_1
E2/26/100
Open Tender
Electrical Works
Percentage
90 days
Chandigarh
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹1.1 L
Chandigarh
14 Sept 2026
14 Sept 2026
25 Sept 2026
14 Sept 2026
25 Sept 2026
18 Sept 2026
18 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DSR item No.29.1 Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings: (Please refer DNIT for complete specification of item no.1) | |||||
| 1.01 | 500 KVA | 1 | Each | 34,55,152 | ₹34,55,152 |
| 2 | DSR item No.5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. | 4 | Each | 15,004 | ₹60,016 |
| 3 | DSR item No.5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. | 90 | PM | 1,246 | ₹1,12,140 |
| 4DSR item No.11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | |||||
| 4.01 | 3½ X 400 sq. mm (82mm) | 12 | Each | 1,713 | ₹20,556 |
| 5DSR item No. 15.15 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. | |||||
| 5.01 | 63 mm dia (OD-63 mm & ID-51 mm nominal) | 40 | PM | 136 | ₹5,440 |
| 5.02 | 120 mm dia (OD-120 mm & ID-103 mm nominal) | 40 | PM | 264 | ₹10,560 |
| 6DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 25.19 MB
BOQ_117207.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .