NER-LJN Division:-: NTV- Improvement of station building with Retiring room, waiting room (Ladies & Gents), Passenger Hall with station toilet, PP shelter 02 bay (PF-02) and station signages etc. & Provision of new Crew lobby at NTV.

A-CPWD-DSR-2021 Items

Item Breakup - A-CPWD-DSR-2021 Items

of 88 mm, weighing not less than 170 gms 17.74 Providing and fixing PTMT shelf 440 mm Each 10 607.05 6070.5 long, 124 mm width and 36 mm height of 148 approved quality and colour, weighing not less than 300 gms. 17.81 Providing and fixing floor mounted, white Each 4 16100.4 64401.6 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 149 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 150 18.7.2 20 mm nominal dia Pipes Metre 150 325.1 48765 151 18.7.3 25 mm nominal dia Pipes Metre 80 408.55 32684 152 18.7.6 50 mm nominal dia Pipes Metre 80 927 74160 LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 153 18.8.1 15 mm nominal dia Pipes Metre 80 441.15 35292 154 18.8.2 20 mm nominal dia Pipes Metre 60 513.75 30825 155 18.8.3 25 mm nominal dia Pipes Metre 100 626.05 62605 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 156 18.9.3 25 mm nominal dia Pipes Metre 20 370.65 7413 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc.-External work 157 18.12.5 40 mm dia nominal bore Metre 60 558.35 33501 Making connection of G.I. distribution branch with G.I. main of following sizes by 18.13 providing and fixing tee, including cutting and threading the pipe etc. complete : 158 18.13.1 25 to 40 mm nominal bore Each 20 757.1 15142 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 159 18.15.1 15 mm nominal bore Each 25 303.85 7596.25 160 18.15.2 20 mm nominal bore Each 20 327.95 6559 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 161 18.17.1 25 mm nominal bore Each 20 532.35 10647 162 18.17.3 40 mm nominal bore Each 10 707.3 7073 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 163 18.21.2.1 15 mm nominal bore Each 4 85.2 340.8 Providing and fixing C.P. brass shower 18.22 rose with 15 or 20 mm inlet : 164 18.22.1 100 mm diameter Each 10 166.35 1663.5 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing and laying S&S centrifugally 18.27 cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 165 18.27.3 150 mm dia pipe Metre 14 1824.7 25545.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c 18.32 necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non Each 10 1712.15 17121.5 166 modular) bricks of class designation 7.5 18.48 Providing and placing on terrace (at all Litre 7000 9.7 67900 floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and 167 suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 168 18.53.1 15mm nominal bore Each 4 500.35 2001.4 Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 18.58.1.2 125 mm nominal dia with 25 mm waste Each 4 45.25 181 169 hole 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron 18.70 Pipes including testing of joints and the cost of rubber gasket : 170 18.70.2 150 mm dia pipes Joint 2 156.05 312.1 Providing & fixing chrome plated brass 18.84 battery based infrared sensor operated pillar cock, having foam flow technology. 171 18.84.1 15 mm nominal bore Each 2 8050.5 16101 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 22.14.2 Cement mortar 1:3 (1 cement : 3 coarse cum 5 14275.75 71378.75 172 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 coarse cum 25 13378.15 334453.75 173 sand) 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 26.86 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 174 26.86.3 Frame size 50 x 100 mm Metre 52 853 44356 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 26.88 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 175 26.88.1 30 mm thick Sqm 16 4327.7 69243.2 Total 31443175.65