Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.7 L+₹6,477.75 (0.18%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹37.4 L+₹72,502.75 (1.98%)Rejected-Finance 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹39.1 L+₹2.5 L (6.68%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹41.8 L+₹5.1 L (14.0%)Rejected-Finance GANDHI CHOWK MANIPURA JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO PATH, HARD STANDING, PLINTH PROTECTION AND CERTAIN B/R WORKS IN MD ACCN OF ZONE-1 AT MIL STN JAISALMER
2022_MES_544388_1
8222/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹94,000
Yes
8 Oct 2022
10 Aug 2022
9 Sept 2022
10 Aug 2022
7 Sept 2022
24 Aug 2022
60 days
Amount
Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish complete all as specified & directed.
M&L for 40 mm thick Cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in flooring or mass concrete complete all as specified and as directed by the Engineer in Charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over including screed bed or bedding layer of 15mm thick in CM (1:4) over 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as base of flooring complete all as specified & directed by Engineer-in-charge.
Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified & directed by Engineer-in-charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto coursein cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.
M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.
M&L for 15 mm thick, plaster in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed by Engineer-in-charge.
Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good distrubed ground on concrete, brick work, masonry etc and removing of demolished materials out side MD land complete all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified & directed by Engineer-in-charge.
M&L Mild framed works such as angles, tees , channels, etc as in fenching posts large and small gates and grills , gratings and chain link fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts ,etc complete all as specified & directed by Engineer-in-charge.
M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge.
Dismantling fencing wire mesh, any type complete all as specified & directed by Engineer-in-charge.
Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engineer-in-charge. Note :-Fixing only chain link fencing, steel round bars for protection will measured and paid separately.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge. Note :-Supply only chain link fencing will measured and paid separately.
S&F mild steel Round bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W Gde E-250 quality-A all as specified & directed by Engineer-in-charge.
S&F Mild steel flat iron for securing of chain link fencing conforming to Fe 290 Gde E-165 in post and strut in fencing including fabrication i.e. cutting tops drilling holes notching for wire welding etc. complete all as specified & directed by Engineer-in-charge.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long,diameter of neck n exc12 mm complete all as specified & directed by Engineer-in-charge.
M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new steel surfaces and applying two coat of aluminium paint over a coat of red oxide etc complete all as specified & directed by Engineer-in-charge.
M&L for preparation of old steel surfaces and applying one coat of aluminium paint etc complete all as specified & directed by Engineer-in-charge.
S & F Steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated and including taking down of any description etc, complete push pull or manual type complete all as specified & directed by Engineer-in-charge.
S & F Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, and including taking down of any description etc, complete gear operated type with bevel gear box and crank handle complete all as specified & directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge.
M&L sand stone slabs 10cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar (1:2) or cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.
Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified & directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.
M& L for PCC 75mm thick type B0 1:3:6 (40mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight complete all as specified & directed by Engineer-in-charge.
Dismantling (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified & directed by Engineer in charge.
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
S &F Rolled sections Fe-410- W(Gde- E-250) quality- Bas in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified & directed by Engineer-in-charge.
GEMRARAMCONTRACTOR
M.D. CONSTRUCTION CO.
M/S MAYA CONSTRUCTION COMPANY
BHAGWATI CONSTRUCTION
M/s Shri Inder Construction Company
Leelashah Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .