RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled No Door Handles ( 140 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Conforming to IS:208(Latest) Yes * Whether ISI Marked No * CM/L Number(Must declare if ISI Marked
Requiredelse write NA) - * Test Report Details Availability of Test Report from Central Govt/State Govt/NABL/ILAC No * 1/5 accredited lab(hint: Must be declared Test Report Number( Must be declared
Requiredwrite NA if Test Report is not available) - * Test Report date( Must be declared
Requiredwrite NA if Test Report is not available) - * Name of the Lab( Must be declared
Requiredwrite NA if Test Report is not available) - * Address of the Lab( Must be declared
Requiredwrite NA if Test Report is not available) - * Test Report to be furnished to the Buyer on demand( Must be declared
Requiredwrite NA if Test Report is not available) - * Type and Finish Type Type 1 * Material Aluminum Alloy * Type 1 Finish "Bright satin finish
Requirednickel chromium plated as per Grade I of IS 1068 : 1993 or copper oxidised as per IS 1378: 1987 or bronze finish for cast brass and zinc die cast handles. Stove enamelled black or copper oxidized for cast iron and malleable cast iron handles. Aluminium anodized to a bright natural
Requiredmat or satin finish or dyed
Requiredthe anodic coating shall not be less than Grade AC 10 of IS 1868 :1982 for aluminium alloy handles" * Type 2 Finish Stove enamelled black * Type 3 Finish Stove enamelled black * Type 4 Finish "Bright satin finish
Requirednickel plated or copper oxidized
Requiredbronze finish for brass handles. * 2/5 Aluminium anodized to a bright.natural
Requiredmat or satin finish or dyed
Requiredthe anodic coating shall not be less than Grade AC 10 of IS 1868: 1982 or as required by the purchaser for aluminium alloy handles" Requirements for Materials Mild steel Grade O of IS 1079 : 1994 * Malleable cast iron Grade A of IS 2108:1977 * Cast brass LCB of IS 292:1983 * "Aluminum alloy pressure die casting" "Designation 5230 or 4600 of IS 617 : 1975" * Aluminum alloy sheet/strip "Designation 19000 H2 of IS 737 : 1986" * "Extruded aluminium alloy rod and flat" "Grade 63400 WP or 65032 WP of IS 733 :198" * Cast iron FG 200 of IS 210 : 1993 * Zinc base alloy die casting IS 742:1981 * Mild Steel bar Grade E 165 (Fe 290) of IS 2062 : 2006 * Manufacture The door handles shall be well made and free from defects They shall be finished correct to shape and dimensions All sharp edges and corners shall be removed and finished smooth so as to facilitate easy handling Cast handles shall be free from casting defects Where the grip portion of the handle is joined with the base piece by mechanical means
Requiredthe arrangement shall have adequate strength com- parable to that of integrally cast type handles Yes * Dimensions of Door Handle Type(Dimension) Type 1 * Reference to Figure 1A * 3/5 Size
Requiredmm 75 * A
RequiredMin 85 * B
RequiredMin 75 * C
RequiredMin 20 * D
RequiredMin 2.5 * E
RequiredMin 5 * F
RequiredMin 8 * G
RequiredMin 25 * H
RequiredMin 8 * I
RequiredMin 1 * Screw Holes ( Number in Each Lug ) 2 * Type 4 Yes * Reference to Figure(2) 4 * Size(3)
Requiredmm 75 * A 115 * B 75 * C 25 * D 3±0.2 * E 10±0.3 * G 35±0.5 * Screw Holes ( Number in a Plate When a Continuous Plate is Used ) 4 * Screw Holes ( Size Designation Of Counter- Sunk Head Wood Screw see IS 6760 : 1972 6 * Dimensions and Tolerences The sizes
Requireddimensions and tolerances of the door handles shall conform to Tables 2A and 2B of IS : 208 The tolerances where not specified on dimensions of door handles shall be as prescribed in clause 6-2 of IS : 208 (Latest) Yes * Packing
RequiredMarking and Labelling "Each door handle shall bear the manufacturer's name or trade-mark" Yes * "Door handles shall be Yes * 4/5 suitably packed in cartons Each carton shall bear a label showing following: a)Manufacturer's name or trade-mark
Requiredb)Type
Requiredc) Size
Requiredand d)Quantity" "The product may also be marked with the Standard Mark" Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
