PROVN OF PARKING SHED BEHIND BLDG NO P149 MAIN OFFICE AT BP LINE AND CERTAIN MINOR AND REVENU WORKS UNDER GE EAST AGRA

Amount

M & L for surface dressing n.exc 15cm deep in sooft/ loose soil complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or depth for foundation etc or for shafts, wells, cesspits, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 75 mm thick (using 40mm graded aggregate) as in sub base etc finishing surface even and rough using broom finish complete all as specified and as directed.

M&L , Brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for Damp proof course 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surface including necessary formwork including water proofing compound @ 2% by weight of cement complete all as specified and directed. ( Make of WPC - Pidilite, water Seal acro paints,snowem ,and other Make approved by GE)

Material and labour for applying 10 mm thick plaster in CM 1:4 including water proofing compound @ 2% by weight of cement complete all as specified and directed. ( Make of WPC - Pidilite, water Seal acro paints,snowem ,and other Make approved by GE)

M & L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base floors complete all as specified and directed.

M & L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) 25 mm thick as in floors finishes-rough to receive tiles etc complete all as specified and directed.

M&L for Non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar),Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed.

M&L for Non skid ceramic coloured tiles of size 450x300x6mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surface such as skriting,dados and risres to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L, rendering 15 mm thick CM 1:4 on fair faces of brick work or concrete surface and finishing surface fair and even (mixed with integral water proffing compound) complete all as specified and directed.

M&L for rendering 15 mm thick on any faces of brick work in CM1:6 finished even and fair complete all as specified and directed.

M&L, rendering 10 mm thick CM 1:3 on fair faces of brick work or concrete surface of ceiling and finishing surface even and fair complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed.

M & L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and and as directed.

M&L for applying two coats of Cement base paint over one coat of primer incl preparation of new or previously untreated surface of wall complete all as specified and directed.

S&F of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F of Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethyene water storage tank (cylinderical vertical with closed top)of , hoisted and fixed in positioncomplete all as specified and as directed.

S&F ball valve high pressure of PTMT 20 mm bore ( minimum weight 210gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of following size complete all as specified and as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor complete all as specified and as directed.

S & F of plastic WC seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed..

S & F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Supply & fixing CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified and directed.

S&F CP brass Soap dish complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Vitreous China bowl Urinal flat back of size 465x355x265mm White with grating and union for discharge pipe complete all as specified and directed.

Supply and fix urinal spreader of PTMT/CP any colour for fixing with 15 mm dia (min.weight 60 gms) complete all as specified and directed.

S&F PVC Waste pipe for wash hand basin/urinal 60cm long complete all as specified and as directed.

S & F of Flushing jet spray (health faucet) for pedestal pattern WC incl. flexible pipe and Brass, Chcomium Plated nuts and blots and water pipe of size 1150 mm long between dia & fixed complete all as specified and as directed.

S&F of Vitreous China wash hand basin white flat back size 550x400mm including brackets , 32 mm dia PTMT waste cupling complete all as specified and directed.

S&F of Toilet paper holder, brass/chromium plated complete all as specified and as directed.

S&F of PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified and as directed.

S&F 20 mm dia tubes "medium grade" galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm dia tubes "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed..

S&F 15mm bore CP bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 20mm bore CP stop cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore CP Angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed.

S&F 15mm bore CP pillar taps, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions etc and fixed complete all as specified and directed.

Supply & fixing PVC connections of 450mm long of Make suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified and as directed.

M&L for Re-inforced cement concrete 1:1.5:3 Type A-1, (using 20mm gradedstone aggregate) (nominal mix) for chajja,deck slabs and in shelves etc complete all as specified and directed.

M&L for RCC 1:1.5:3 Type A-1 NOMINAL mix (using 20 mm graded stone aggregate) as in columns, pillars, pier, posts,lintel bands complete all as specified and directed.

M&L for RCC1:1.5:3 Type A-1 NOMINAL mix (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat foir finished surfaces complete all as specified and directed.

M&L for formwork to flat rough finished surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M & L formwork to edges of concrete roofs exc 10cm n exc 20cm wide for fair finished surface complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for 75mm thick cement concrete1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection ,finishing cement concrete surface even and smooth without using extra cement and spike rollong to surfaces or making impression of expanded metal,whilst the concrete is green complete all as specified and directed.

M&L borken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, wall including fittings dismantling etc confirming to IS 13592 complete all as specified and directed.

S & F PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement (Diameter of outlet 75mm) in repairs complete all as specified and directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement in repairs complete all as specified and directed.

M&L for 100mm internal dia salt glazed stone-ware drain pipe Grade'A' laid in trenches and jointed complete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 100mm dia pipes complete all as specified and directed.

S&F factory made solid panel PVC door frame of size 50mmx95 mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube,incl holdlfast all as per specification and drawing and all as specified and directed.

S&F factory made solid panel PVC Moulded door shutter 28 to 30mm thick (style)(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing and all as specified and directed.

S&F 100 mm long butt hinge, stainless steel complete all as specified and directed.

S&F aluminium anodised handles cast type, anodised 150mm long complete all as specified and directed.

S&F aluminium anodised tower bolt cast type, anodised 200 mm long complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded agg) as in bed to drain pipe, 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports to concrete and laying beds to falls complete all as specified and directed.

M&L for Providing precast cement concrete type B-1 (using 20mm stone aggregate ) set in cement mortar 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex tones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

Supply only water proofing compound

Excavation over area n.exc. 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

-ditto- all as per item No 67 above but depth exc 1.5m but n.exc. 3.00m complete all as specified and directed.

M&L for Plain cement concrete type D-2 1:4:8 (40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in flooring complete all as specified and as directed.

M&L for old size brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:6 complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc) shelves and similar articles with plain faces and set in cemnet mortar 1:4 complete all as specified and directed.

M&L for Salt glazed stoneware pipes 150 mm dia in drain/sewage line of grade “A’ complete all specified and directed

M&L for 150 mm bore Concrete bed 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain/sewage line pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all specified and directed.

Excavation in post holes soft/loose soil (or similar holes) each n, exc 0.5 cum and getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and romoving surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F steel work in square/ rectangular/ tubular trusses including special shaped washer, gusset plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and direceted.

M&L for preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 25mm thick precast cement concrete jalli and louvers, with 1:2:4 Type B-0, (using 12.5mm graded stone aggregate) set in CM 1:4, including all mouldings but excluding frame, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed .

M&L for Plain Cement Concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

M&L for Ruberised Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade over 25 mm thick sand cushining complete all as specified and directed. (Note :- Sand cushion shall be measured and paid seperately)

Supply only fine sand for Sand cushion finished complete all as specified and directed.

S&F steel work in rooled sections or tubular sections, in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F joist, channel, angle or tee sections fixed independently without connecting platges, etc (cut to ordinary length) including welding to other steel members of Fe 410 Gde complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and modular sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Havells/RR Kablel/Grandlay. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light point or one fan point controlled by one switch

All as per item No 86 above but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item No 86 above but One 5 pin socket outlet 5/6 Amps on independent board

All as per item No 86 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FR PVC insulated sheathed cable with FR PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board/600 sqmm wall fan.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body all as specified and directed. Make : Havells/Cona/Plaza/Legrand

Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body all as specified and directed. Make : Havells/Cona/Plaza/Legrand

Supply and fix socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body. Make : Havells/Cona/Plaza/Legrand

Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body all as specified and directed. Make : Havells/Cona/Plaza/Legrand

Supply and fix ceiling rose , PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals all as specified and directed. Make : Havells/Cona/Plaza/Legrand

Supply and fix LED lights fitting 1x 20W(batten and rod separate), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as as specified and directed. Make : Bajaj/Havells/Wipro/Philips

Supply and fix Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and directed. Make : Bajaj/Havells/Wipro/Philips

Supply and fix of LED Bulb 7 W, warm white all as specified and directed. Make : Bajaj/Havells/Wipro/Philips

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Wipro/Philips/CG

Supply and fix heavy duty exhaust fan metal body complete with blades, frame and louvers shutter, voltage 230V, 50 Hz, Copper winding of sweep 300mm, 1400 RPM, ISI marked, Dynamically balanced impellers for smooth & vibration-free operation, Pre-lubricated double ball bearing for maintenance free running, Anti corrosive treatment and attractive metallic finish including provision of cable from ceiling rose to fan with flexible cable 24/0.2mm with copper conductor and M& L for PCC work in wall for proper size of exhaust fan including hole making , anchor bolt grouting in wall for proper mounting for exhaust fan and making good surface and whitewashing after completion of pcc works all as specified and as directed. Make: Havells/Bajaj/USHA

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link all as specified and directed. Make : Legrand/Schneider/Hager

Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Legrand/Schneider/Hager

Supply and fixing in MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Legrand/Schneider/Hager

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, Triangular element, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make : Bajaj/CG/Havells/USHA/Recold

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below norm55 charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core. Complete all as specified and directed. Make : Havells/Polycab/Grandlay

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed.

Supply and lay GI tube light grade 25 size as in cable protection pipe including all fittings complete all as specified and directed. Make Jindal/Prakash/Surya/Bansal

GLOBAL DEVELOPERS COMPANY

deva engineers

Asha Construction

N.K. ENTERPRISES

SahaDevSingh Constructions