CA No. CE CHZ PAT T-08 2022-23PROVN OF AC SHEDS AT DAPPAR

Amount

Total amount of Sch 'A' Sec-I ( BUILDING WORKS ) Lump sum price worked out by the contractor for " BUILDING WORKS " as listed in schedule 'A' Part-I

Total amount of Sch 'A' Sec- II (SITE CLEARANCE, SITE DEVELOPEMENT & MISC. EARTH WORKS) Lump sum price worked out by the contractor for " SITE CLEARANCE & Earth Works " as listed in schedule 'A' Part-II

Total amount of Sch 'A' Sec- III ( INTERNAL WATER SUPPLY WORKS ) Lump sum price worked out by the contractor for " BUILDING WORKS " as listed in schedule 'A' Part-III

Total amount of Sch 'A' Sec- IV (INTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for " INTERNAL WATER SUPPLY WORKS " as listed in schedule 'A' Part-IV

Total amount of Sch 'A' Sec- V (SEWAGE DISPOSAL WORKS) Lump sum price worked out by the contractor for " SEWAGE DISPOSAL WORKS " as listed in schedule 'A' Part-V

Total amount of Sch 'A' Sec- VI (ROAD, PATH, CULVERTS AND HARDSTANDING WORKS) Lump sum price worked out by the contractor for " ROAD/PATH/CULVERT WORKS " as listed in schedule 'A' Part-VI

Total amount of Sch 'A' Sec- VII (AREA DRAINAGE WORKS) Lump sum price worked out by the contractor for " AREA DRAINAGE WORKS " as listed in schedule 'A' Part-VII

Total amount of Sch 'A' Sec- VIII (COMPOUND WALL, GATE & SECURITY FENCING WORKS) Lump sum price worked out by the contractor for " COMPOUND WALL, GATE & SECURITY FENCING WORKS " as listed in schedule 'A' Part-VIII

Total amount of Sch 'A' Sec- IX (EXTERNAL WATER SUPPLY AND BORE WELL WORKS) Lump sum price worked out by the contractor for " EXTERNAL WATER SUPPLY AND BORE WELL WORKS " as listed in schedule 'A' Part-IX

Total amount of Sch 'A' Sec - X EXT ELECTRIC SUPPLY, LIGHTENING PROTECTION WORKS AND ALLIED ELECTRICAL ITEMS FOR BORE WELL, FIRE ALARM AND FIGHTING WORKS) Lump sum price worked out by the contractor for " EXT ELECTRIC SUPPLY, LIGHTENING PROTECTION WORKS AND ALLIED ELECTRICAL ITEMS FOR BORE WELL, FIRE ALARM AND FIGHTING WORKS " as listed in schedule 'A' Part-X.

Total amount of Sch 'A' Sec- XI (FIRE ALARM AND FIRE FIGHTING WORKS) Lump sum price worked out by the contractor for " FIRE ALARM AND FIRE FIGHTING WORKS " as listed in schedule 'A' Part-XI.

Total amount of Sch 'A' Sec- XII (RAIN WATER HARVESTING WORKS) Lump sum price worked out by the contractor for " RAIN WATER HARVESTING WORKS" as listed in schedule 'A' Part-XII.

Total amount of Sch 'A' Sec- XIII (SIREN SHED WORKS) Lump sum price worked out by the contractor for " RAIN WATER HARVESTING WORKS" as listed in schedule 'A' Part-XIII.

Total amount of Sch 'A' Sec- XIV (DEMOLITION WORKS) Lump sum price worked out by the contractor for " DEMOLITION WORKS " as listed in schedule 'A' Part-XIV.

Provide a Prime Cost Sum for following work under terms and condition 1(v) and 5 of IAFW-2249 (General Conditions of Contracts) "Supply, installation, testing, commissioning submerssible pumping set suitable for 200mm bore well of required capacity for head and discharge as directed.

Schedule 'A'Section-XVI (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

High intensity retro reflective sign boards made of hardened ACP sheet 2 mm thick POP riveted to stainless steel pipes as required. Sign boards shall be reflective on both sides with wide HP sheet and overlay film of blue/green colour with computer cut letters/sign and border made of high intensity grade white/yellow sheeting and mechanically fixed on ACP sheet complete all as specified and directed. Notes:-(i) Stainless steel pipe will be measured and paid for separately under item No. 17.00 above. (ii) The rate shall include all computerized lettering of any height, width and any Nos and may consist of letter, symbols or alphabets in any pattern and of any size etc complete as per data provided during execution. (iii) The sign board shall be manufactured as per sample kept in GE office.

INTERNAL ELECTRICAL SUPPLY WORKS Concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable, heavy duty PVC conduit (minimum 25mm bore size 2mm wall thickness) and conduit accessories concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, regulators, bell push etc, including 1.5 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light/bell/fan point (Ceiling/ Wall/ Exhaust) controlled by one number one way switch or one number one way switch and regulator

One light point conrolled by two numbers two way switches

One 5/6 Amps socket outlet/switch socket outlet on independent board

One 5/6 Amps socket outlet/switch socket outlet on same board with other switches.

Concealed point wiring complete for 15 Amps socket outlet on independent board with 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 25mm bore size 2mm wall thickness) and conduit accessories concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, including 2.5 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly.

Switch piano flush type 5/6 Amps, single pole, two way, 230 Volts complete all as specified and directed.

Flame proof point wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLS-H) electric cable with multi stranded copper conductor of size 2.5 Sqmm conforming to IS-694 for phase and neutral drawn through and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of (minimum size 20mm dia) surface type including all flame proof conduit fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for four light controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated and unsheathed 1100V grade (FRLS-H) electric cable with multi stranded copper conductor of size 2.5 Sqmm conforming to IS-694 and connected to earth dolly , complete all as specified and directed.

Flame proof point wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLS-H) electric cable with multi stranded copper conductor of size 1.5 Sqmm conforming to IS-694 for phase and neutral drawn through and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of (minimum size 20mm dia) surface type including all flame proof conduit fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for Two light controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated and unsheathed 1100V grade (FRLS-H) electric cable with multi stranded copper conductor of size 1.5 Sqmm conforming to IS-694 and connected to earth dolly , complete all as specified and directed.

Flame proof point wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLS-H) electric cable with multi stranded copper conductor of size 1.5 Sqmm conforming to IS-694 for phase and neutral drawn through and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of (minimum size 20mm dia) surface type including all flame proof conduit fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated and unsheathed 1100V grade (FRLS-H) electric cable with multi stranded copper conductor of size 1.5 Sqmm conforming to IS-694and connected to earth dolly , complete all as specified and directed.

Flame proof/weather proof direct entry type rotary switch single pole,totally enclosed, on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 16 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested & certified by CMRI-Dhanbad complete all as specified and directed.

Flame proof/weather proof LED fixture 2x20 watts ,totally enclosed 1200mm with aluminium extruded and aluminium heat sink, System Lumen Efficacy ≥100 Lm/W operating Voltage between 140-270Vac , Power Factor more than 0.90%, LED Driving Current < 70% of rated maximum forward current,THD less than 20%, CRI more than 80%, Luminaire intergal driver with 2KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Over all electrical efficency more than 90%, Driver electrical efficiency will be > 85%, with 2 year warranty complete all as specified and directed.

Flame proof/weather proof LED fixture 24 watts ,totally enclosed 1200mm with aluminium extruded and aluminium heat sink, System Lumen Efficacy ≥100 Lm/W operating Voltage between 140-270Vac , Power Factor more than 0.90%, LED Driving Current < 70% of rated maximum forward current,THD less than 20%, CRI more than 80%, Luminaire intergal driver with 2KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Over all electrical efficency more than 90%, Driver electrical efficiency will be > 85%, with 2 year warranty complete all as specified and directed.

Flame proof 12 way distribution board for mounting MCBs/RCBO's ELCB etc. as per IS specification and CMRI approved of factory made fabricated out of cast aluminium alloy LM-06 gray appoxy powder coated finish, fitted with DIN Channel neutral link, earth links and 200 Amps rated bus bar. The DB shall be having with IP-65 protection , complete all as specified and directed. NOTE:-The DBs shall also be consisting and including the following :- (a) MCB SPN,40 Amp, AC 50 Hz,230 volts - 01 No, (b) MCB SP,10 Amps,AC 50 Hz, 230 volts - 10 Nos.

Flame proof flexible metallic hose conduit of external dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.,complete all as specified and directed.

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (medium grade) GI pipe for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC 1:1.5:3 type A-1 reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as specified and directed. NOTE : The unit rate includes for protecton pipe 15mm and GI earth wire 4mm from top of earth plate upto 7.50 metre above ground level.

Flame proof/weather proof 100 W LED flood light with system Lumen Effiicacy >100 Lm/W, Operating Voltage between 140-270Vac, driver will have cut off at >300 Vac, Power factor more than 0.95%, LED CCT 5665 + or -355K as per ANSI BIN, LED Driving Current <70% of rated maximum forward current, Luminaire intergal driver with 5KV surge protection, over load protection, No Load Proctection and BIS Marking (R no For Driver) ,driver certification IEC64347-2-13 IS (15885),driver Should be concealed under IP66 protection, over all electrical efficency more than 90%, driver electircal efficiency will be > 85% connecting with PVC copper cable of size 3x1 sqmm as per IS 10322 at least 2 years on site warranty without any condition complete all as specified and directed.

MCB SP, 240 Volt , 50 Hz, 6 to 32 A, 10 KA , "C" curve, complete all as specified and directed.

MCB SPN,16-32 Amps, 'C' Curve , 240 volt , 50 Hzs,10 KA, complete all as specified and directed.

Supply and fixing BLDC Ceiling fan energy efficient, minimum service value (m3/minute/Watt)>= 4.5, including electronic step type fan regulator flush type fixed on cover sheet, 230 V, 50 Hz, 1200 mm sweep confirming to IS 374-2019, with all standard accessories as per manufacturer's recommendations ,with provision of PVC insulated flexible cable FRLSH grade 3 core 0.5mm copper conductor 1100 volts grade from porcelain connector /ceiling rose to ceiling fan,complete all as specified and directed.

Tube light fitting ,1x18/20 w LED 230v , 1200 mm, energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod and with aluminium extruded industrial fitting and aluminium heat sink, CRI more than 80%, Luminaire intergal driver with 2KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Over all electrical efficency more than 90%, driver electrical efficiency will be > 85% with 2 year warranty complete all as specified and directed.

Light fitting LED Panel 20 watt,230v,round type surface mounted,injection molded in thermally conductive engineered plastic-FR VO grade housing, diffuser with high optically efficient material complete all as specified and directed.

Tube light fitting ,1x10/12 w LED 230v , 600 mm, energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including LED tube rod complete all as specified and directed.

Batten holder pin type, brass ring with PVC body, ISI marked complete all as specified and directed.

LED glass bulbs 07 watts , pine type,6.5k/4k/3k (PC Cover) full drum complete all as specified and directed.

Exhaust fan of 450mm sweep,metal body, heavy duty, double ball bearing, 1400 RPM, 350 watt, 4 blades, air delivery 6120 m3/h, suitable for SP 230/250 Volts, 50 Hz AC supply complete with louver shutter including fixing/ grouting of frame & louvers in wall using bolts of bolts of suitable size & connecting with and including PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to fan complete all as directed. Note : Cost for making opening in wall and grouting of mild steel work shall be deemed include in the lump sum cost of the building.

Exhaust fan of 300mm sweep,metal body, heavy duty, double ball bearing, 1400 RPM, 90 watt, 4 blades, air delivery 1710 m3/h, suitable for SP 230/250 Volts, 50 Hz AC supply complete with louver shutter including fixing/ grouting of frame & louvers in wall using bolts of bolts of suitable size & connecting with and including PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to fan complete all as directed. Note : Cost for making opening in wall and grouting of mild steel work shall be deemed include in the lump sum cost of the building.

Bulk head fitting 9/10 watt, LED high Pressure die cast aluminium housing with high power LED as light source polycarbonate cover with individual LED lenses. IP66, impact resistance of IK09, with milky diffuser single phase 230v, complete all as specified and directed.

Building security light pressure die cast housing with epoxy power coated dark graphite grey color finish, prismatic polycarbonate cover with individual LED lenses.IP65, 20 watt with suitable in-built electronic driver complete fixed on bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed and fitted with MS clamps, nuts and bolts nad washers, connecting to ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as specified and as directed.

supply & fix flame proof 4 way distribution board for mounting MCB/RCBOs/ELCBs/ etc as per IS specification and CMRI approved factory made fabricated out of cast aluminium alloy LM-06 grey approx, powder caoted finish fitted withy DIN channel neutral link, earth links and 200Amp rated bus bar. The DB shall be having IP-65 protection. The DBs shall be consisting and including the following complete all as specified and as directed. (a) SPN 230 V, AC 50 HZ 40Amp --01 (b) MCB Single pole 240 V AC 50 Hz 10 Amp--- 02 Nos

SEWAGE DISPOSAL WORKS H.D.P.E. Double Wall Corrugated(DWC) Pipes(ISI marked) 200 mm bore SN-8 Class as per IS 16098 part II for nonpressure Underground drainage and Sewerage applications with specials including cost of special O rubber ring couplers etc. , laid in trenches on concrete bed to level /gradient ,jointing with appropriate class fittings as per manufacturer's instructions including jointing accessories and fittings complete, all as specified and directed.

ROAD, PATH, CULVERTS AND HARDSTANDING WORKS Preparation of un-surfaced Water bound macadam (WBM) surfaces by brushing with wire brushes for removing caked mud ,dust, loose material, foreign material etc., sweeping with power brooms and finally fanning the cleaned surface with air compressors to remove all loose dirt etc. and applying evenly a priming coat on un-surfaced wet mix macadam surfaces conforming to Clause 502 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion SS1 grade,confirming to IS 8887(latest edition) @ 7.5 kg per 10 sq metres using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed.

Preparation of surfaces and applying evenly a Tack coat conforming to Clause 503 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion RS1 grade,confirming to IS 8887(latest edition) @ 2.5 kg per 10 sq metres using using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed.

Providing, laying & compaction of Bituminous Macadam (BM) conforming to Clause 504 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), using mechanically crushed stone aggregates and granual material etc. of grading II as per Table 500-7 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), premixed with bituminous binder, Bitumen grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed. Notes : (i) The contractor shall quote the rate against Item considering 3.5% VG-30 bitumen content. Job mix formula as per MoRT&H specifications for road and bridge work (Fifth Revision) for bituminous concrete shall be got designed from NIT/ CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less 3.4% by weight of total mix as per clause 504.2.4 of MoRT&H specifications (Fifth Revision). (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 45.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.

Providing and laying 30 mm thick (consolidated thickness) Bituminous Concrete (BC) layer conforming to clause 507 of MoRT&H specifications for road and bridge work (Fifth Revision) including cost of coarse aggregates, fine aggregates, filler, 5.5% binder (paving Bitumen grade VG-30) content by weight of total mix and crushed aggregates of grading 2, Anti Stripping Agent, Warm Mix Additives (quantity, quality and grade as per the approved Job Mix Formula) etc, cleaning and pre-heating of the mineral aggregate, filler & bitumen to the specific temperature, thoroughly mixing with binder of specified bitumen content, Anti Stripping Agent, Warm Mix Additives as per mix design in Hot Mix Plant of 100-120 TPH capacity, carrying the hot mixed materials by means of tipper, trucks, or any other approved and suitable arrangements, laying the hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber thorough rolling with power roller 8 to 12 tonnes smooth wheeled, vibratory and tandem roller with necessary hand packing and pinning to give an even surface, including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-Charge, required quality control tests at required interval etc complete in all respects complete all as specified and directed.

M & L for precast (factory casted) cement Concrete kerb stone casted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with plain or interlocking joints (as directed), making groove in existing road of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:4, making good distrubed surface of ground complete all as specified and directed.

Centrifugally cast ductile iron pressure pipe 200 mm bore, with socket & spigot ends ISI marked with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gasket D jointing) with cement mortar lining in the pipes, complete all as specified and directed. NOTE:-Ductile iron fittings will be measured and paid for separately.

Centrifugally cast ductile iron pressure pipe 150 mm bore, with socket & spigot ends ISI marked with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gasket D jointing) with cement mortar lining in the pipes, complete all as specified and directed. NOTE:-Ductile iron fittings will be measured and paid for separately.

Ductile iron fittings such as bends (any type, radius and angle) Tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, tail pieces with one end flanged (integrally cast) and one end socket/spigot caps and plugs suitable upto 200 mm bore ductile iron pressure pipes of K-7 classification including nuts,bolts,washer and push on flexible rubber gasket joints, complete all as specified and directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both end for 80mm bore for iron pipe complete all as specified and as directed.

Construction of brick masonary valve pit of size 900 mm x 900mm x 900 mm (Internal size) thickness of walls shall be 23cm in brick work in cement mortar 1:6 internally plastered in cement mortar (1:6) and externally plastered in cement mortar (1:4) over 15cm thick PCC 1:4:8 type D-2 having 15cm offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 on the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Construction of brick masonary valve pit of size 1200 mm x 1200mm x 1200 mm (Internal size) thickness of walls shall be 23cm in brick work in cement mortar 1:6 internally plastered in cement mortar (1:6) and externally plastered in cement mortar (1:4) over 15cm thick PCC 1:4:8 type D-2 having 15cm offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 on the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Sluice valve, 100 mm bore, cast iron body, having brass spindle with iron wheel at top, class PN 1.6, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of bolts, nuts washers and rubber gaskets, conformig to IS 14846-2000 complete all as specified for the following size complete all as specified and directed.

Sluice valve, 150 mm bore, cast iron body, having brass spindle with iron wheel at top, class PN 1.6, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of bolts, nuts washers and rubber gaskets, conformig to IS 14846-2000 complete all as specified for the following size complete all as specified and directed.

Sluice valve, 200 mm bore, cast iron body, having brass spindle with iron wheel at top, class PN 1.6, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of bolts, nuts washers and rubber gaskets, conformig to IS 14846-2000 complete all as specified for the following size complete all as specified and directed.

Supply, Fixing & jointing Cast Iron non return (reflux) valve ISI marked, flanged ends in swing type design is:5312 part-1 class PN 1.6 with flanged and drilled ends suitable for 100mm nominal bore pipe having gun metal seat etc complete & including joints and jointing material such as bolts, nuts, washers and rubber gaskets,complete all as specified and directed.

Supply, Fixing & jointing Cast Iron non return (reflux) valve ISI marked, flanged ends in swing type design is:5312 part-1 class PN 1.6 with flanged and drilled ends suitable for 150mm nominal bore pipe having gun metal seat with bypass arrangment etc complete & including joints and jointing material such as bolts, nuts, washers and rubber gaskets, complete all as specified and directed.

Boring of pilot bore of 200mm internal dia of MS Pipe in any kind of soil strata up to 200mtr depth with reverse rotary circulation method and getting out the strata including electronic logging of the bore to the complete depth including hard stone/ boulder submitting the strata detail both graphically recorded as well as strata results including testing of yield complete all as specified and directed. NOTE:- After completion of pilot boring,if strata is found absent,contractor will carry out pilot boring at a location as directed by the AO.Job as done will be measured and paid under this item only.

Boring of pilot bore of 200mm internal dia of MS Pipe in any kind of soil strata beyond 200mtr depth with reverse rotary circulation method and getting out the strata including electronic logging of the bore to the complete depth including hard stone/ boulder submitting the strata detail both graphically recorded as well as strata results including testing of yield complete all as specified and directed.

Developing and enlarging the pilot bore of 200 mm bore perfectly vertical including maintaining starta samples duly graphically recorded and carried out electronic log test of the layers to the complete depth etc including reaming of 200 mm bore by enlarging to not less than 675mm (27") dia bore suitable for lowering Mild steel casing pipes for the required length complete all as specified and directed. Drilling from ground level upto 60 mtr depth complete all as specified and directed.

Developing and enlarging the pilot bore of 200mm bore perfectly vertical including maintaining starta samples duly graphically recorded and carried out electronic log test of the layers to the complete depth etc including reaming of 200mm bore by enlarging to not less than 675mm (27") dia bore suitable for lowering Mild steel casing pipes for the required length complete all as specified and directed. Drilling from ground level exceed 60m depth and upto 200m depth complete all as specified and directed.

Developing and enlarging the pilot bore of 200mm bore perfectly vertical including maintaining starta samples duly graphically recorded and carried out electronic log test of the layers to the complete depth etc including reaming of 200mm bore by enlarging to not less than 675mm (27") dia bore suitable for lowering Mild steel casing pipes for the required length complete all as specified and directed. Drilling from ground level exceed 200m depth and upto 300m depth complete all as specified and directed.

Developing and enlarging the pilot bore of 200mm bore perfectly vertical including maintaining starta samples duly graphically recorded and carried out electronic log test of the layers to the complete depth etc including reaming of 200mm bore by enlarging to not less than 675mm (27") dia bore suitable for lowering Mild steel casing pipes for the required length complete all as specified and directed. Drilling from ground level exceed 300m depth complete all as specified and directed. Note for item Nos. 67.00 to 70.00 : Pea gravel packing around casing pipe and slotted pipe in bore hole shall be measured and paid separately against respective item of BOQ.

Supplying, assembling, lowering and fixing Mild steel ERW casing pipe 300mm nominal dia conforming to IS-4270(2001) having wall thickness not less than 10.00mm conforming to IS-4270(2001) screwed and socketed and welded to each other length of pipe upto 6 mtr long, including necessary fittings & fixtures and jointing from ground level duly painted with two coats of bituminous paint on external surfaces of pipe complete all as specified and directed.

Supplying, assembling, lowering and fixing Mild steel ERW casing pipe 200mm nominal dia conforming to IS-4270(2001) having wall thickness not less than 7.1mm screwed and socketed and welded to each other length of pipe upto 6 mtr long, including necessary fittings & fixtures and jointing from ground level duly painted with two coats of bituminous paint on external surfaces of pipe complete all as specified and directed.

Supplying, assembling, lowering and fixing of 200mm nominal dia conforming to IS-4270(2001) Stainless steel slotted pipes having wall thickness not less than 7.30mm, cage type wire wound screen ‘V’ shaped profile in suitable length having slots of size not more than 1mm width including necessary end coupling threaded or welded as directed into bore holes beyond casing pipe complete all as specified and directed.

Supply, lowering, jointing, testing and commissioning MS pipe heavy duty 100mm internal dia., 3 mtr long with both ends fitted with heavy duty MS flanges 14mm thick, two Nos grooves for submersible cable continuous welded and drilled 4 Nos hole, complete as column pipe including jointing material such as bolts, nuts, washers and rubber gasket etc complete all as specified.

Supply and fixing mild steel bail plug assembly 7mm thick suitable for 200mm bore casing pipe internal threaded with strong iron hook, screwed and welded to casing pipe , and handing over the sample strara box complete all as specified and directed.

Supply and fixing and lowering into bore hole-centering guide made of MS flat Ring ribs suitable for 200mm dia casing pipe complete all as specified and directed.

Supply and fixing mild steel reducer 300mm x 200mm of wall thickness not less than 8 mm screwed both ends of appropriate length but not less than 400mm including necessary fittings & fixtures and jointing complete all as specified and directed.

Supply and fixing mild steel housing I-channel clamps in two halves of size 200mm wide made out of 12mm thick MS plate made to shape for 300mm bore casing pipe with necessary bolts, nuts and washers at ground level embedded in bed rock PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Supply and fixing mild steel well Borewell cap made of 8mm thick mild steel sheet suitable for 300mm dia ERW MS casing pipe and dully drilled for 100 mm bore GI pipe heavy grade including locking arrangement with top end of the casing pipe test complete all as specified and directed.

Fabrication & supplying of strata sample box overall size 2000x1500x100 mm, made out 18 to 20 mm thick venneered particle boars, frame of aluminium angle of size 25x25x2mm having 20 Nos. partions of size 100x75x100mm made with 12mm thick commercial qualityplywood and 25x25x2mm aluminium angle bearers, with and also including sliding type sheet glass 5mm thick cover with suitable size aluminium channel frame complete as specified.

Development of tube well by air compressor of capacity not less than 500 CFM at 150 to 200 PSIG approximate capacity as required on ground till to get clear water complete including carrying out yield test complete all as specified and directed.

Development of tube well by submersible pump of higher capacity for required hours to ascertain quality and yield of the well complete all as specified and directed.

Supply and packing pea gravel of size 2mm to 3.5 mm duly screened and washed, around casing pipe and slotted pipe in bore hole complete all as specified and directed.

Supplying, laying, jointing and testing of pre-insulated multi standard copper conductor flat of size 16 sqmm, 3 core submersible cable and connected to submersible pump all as specified and directed.

S&F centrifugally cast (spun) ductile iron pressure pipes with flanged ends ends having ISI stamping marking with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes , complete all as specified & directed of 150 mm dia complete all as specified and directed.

S&F centrifugally cast (spun) ductile iron pressure pipes with socket& spigot ends having ISI stamping marking with IS 8329/2000 classification K9, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes , complete all as specified & directed of 100 mm dia complete all as specified and directed.

Supply, installation & tesing fully automatic star-delta starter for submersible pump set of capacity 40 HP, 415 V, with relay range 36-60 amps 50 Hz 3 Phase complete in and including MS fabricated stand made out of 40 x 40 x 5mm angle frame duly grouted in wall, painted 2 coats of synethetic enamel paint over a coat of red oxide for placing starter all as specified and directed.

Supply, Fixing & jointing cast iron single orifice kinetic air valve designed as per IS:14845 in PN 1.6 (ISI marked) of size 25mm dia with flanged end for upto 200mm nominal bore pipe/fitting includig tapping etc complete all as specified.

Supply & Fixing CI fittings for flanged & spigot socketed pipe e.g. bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces, collars, caps and plugs conforming to IS of size upto 200mm bore complete all as specified and directed.

Materal & labour for providing Titan joints for spigot and socket DI pipes of 150-200 mm dia including connected items complete all as specified and directed.

S&F polypropelene rope 16 mm dia, ISI marked, heavy duty grade complete all as specified and directed.

M&L for borewell chart on acrylic sheet of size 60 cm x 15 cm duly marked permanent marking including 12mm thick plywood frame, clamps for fixing on wall etc all as specified and directed.

Supply/Laying / fixing, jointing, testing and commissioning, LT under ground cable 3.5 core,50 sqmm,1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multi stranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified

EXT ELECTRIC SUPPLY, LIGHTENING PROTECTION WORKS AND ALLIED ELECTRICAL ITEMS FOR BORE WELL, FIRE ALARM AND FIGHTING WORKS RING MAIN UNIT Supply, installation & testing of 11 kv 630A 25KA 4 way Indoor Motorized operated Ring Main Unit including Design & Engineering having following features:- All live parts Copper bus bar, VCB shall be enclosed in a manually/TIG welded, of suitable thickness, stainless steel tank enclosure filled with SF6 gas at suitable pressure. The Unit Shall include the following with all necessary standard fittings required at site 11KV, 630A, 25KA for 1Sec, Indoor type, Motorized, Non extensible, SF6 gas insulated Ring Main unit with sealed pressure system criterion in accordance with the IEC: 60298. The complete switchgear shall be tested for internal arc of 21kA AFLR for 1 sec. for both cable box and tank Rated Voltage - 12KV Power frequency withstand voltage - 28KV Impulse witstand voltage - 75kVP (an altitude <1000 m above msl) Rated Current Amp - 630A. Ambient temp ( -5 deg C to +40 deg C) SF6 Insulated Vacuum Circuit Breaker (RMU) consisting of 4 modules having:- One VCB and Three Load Break Switch:- One Incoming and 3 outgoing - Operation of LBS should be Motorized. - This function-unit consists of a vacuum-circuit breaker in combination with a three-position-switch. The three-position-switch fulfils the operation of the disconnector-function and the earthing-function. The circuit-breaker-unit T2 is equipped with an over current-time-release for the protection of distribution transformers.

RING MAIN UNIT (CONTD...) The switching-unit is designed as a three-position-switch. This three-position-switch combines the functions of switch-disconnector and earthing-switch. Vacuum circuit breaker 12 kV, 630 A, 25kA, Stored Energy mechanism for Motorized Operation with integrated manual operated earth-switch, Self Powered Electronic numerical protection relay providing over-current & earth fault protection, CSPR relay, current transformers for Protection Class 1.0/5 P10, Burden 2.5VA with CT ratio **/1/1 A, AC, Capacitive voltage indication fixed type - LED displayThe switch-disconnector as well as the earthing-switch is equipped with a separate drive-unit. Cable switch 12 kV, 630 A, 25 kA, Stored Energy mechanism for Manual Operation – with integrated manual operated earth-switch,Cable bushing 630 A, standard C bushings,Cable cover standard, Capacitive voltage indication fixed type - LED display,ON, OFF, EARTH indication on the front mimic of the panel, Cable box for termination of cable up to 1 No. X 3C X 300 sq. mm, Shunt Trip Coil – 24V DC.,Emergency Trip Push Button., Standard Manometer, Operating Handle, Battery 24V DC, 12Ah & Battery Charger 5A, Control card for battery charger 24VDC, Cable clamping provision (standard), Operation and Installation Manual, Installation & Commissioning Manual Cable entry bottom, front, Set of 12kV Right Angled Cable Boots, Additional equipment delivered separately or mounted separately or mounted in resp. of each panel / RMU, Standard Manometer w/o remote contact, Operating Handle, Cable clamping provision (standard),

RING MAIN UNIT (CONTD...) Operation and Installation Manual, Installation & Commissioning Manual, Battery and Battery Charger for Motorization, RMU shall be fully motorized and shall have manual operation as well. RMU shall be provided with battery and battery charger rated for 24 V DC for motorisation RMU cable box shall be front accesible type to have easy access to protection. Cable box should be arc proof with bolted door and interlocked with respective earthing switchs. Doors should be removable for the ease aceess to terminate cables. RMU Enclosure shall be made up of CRCA having minimum thick ness of 2mm for load bearing and minimum 1.6mm for non load bearing members. RMU tanks shall be 2 mm thick of stainless steel material welded by using robotic welding or manual tig welding. Note :- The consolidated rate for Srl No. 94.00, 94.10 & 94.20 shall be quoted against Srl No. 94.00 of BOQ.

LT PANEL Supply & erection testing and commissioning of LT panel board indoor type mounted ,cubical, weather and vermin proof CPRI approved made out of CRCA sheet of 2mm thick as per IEC-61439 - 1 & 2 dust and vermin proof, powder coated, Aluminium TPN electrolytic grade Bus bar 600Amp . All MCCB's should be Thermal Magnetic Adjustable type, Class II Front Facia with cross bolt terminals, Single Frame from MCCB Rating 32Amp to 250Amp, MCCB 400Amp / 630Amp as Single Frame. All MCCB's should have aux. contact for ON /Trip Indication on Panel. The Electrical Life of MCCB should be as follows : Upto 250Amp Rating MCCB's as 10000no. Electricals operations & 400Amp Rating - 6000no. Electrical operations & 630Amp - 4000no. Electrical operations. All Multifunction meters should be with RS485 Port or Equivalent ,(Class 0.5S, with RS485 Port, with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Run Hrs, ON hrs, Interupts, Syncronisation cum AMF System for 3 no. DG's & interlocking Scheme for all Breakers : Panel should have necessary Automation for Syncronisation of 3 no. DG's & AMF function to start Master DG automatically when the power goes off. Panel Should be design in such a way with necessary logic that if any Transformer is not working, total load should be shared by other transformers. There should be Auto / manual operation option for running all Transformers & DG's . The Synchronisation system should have Microprocessor based Controller such as Dief or woodward controller 03 nos or equivalent, along with PLC system for Syncronisation of DG's (3 nos). & load management with necessary Protections of DG's such as overcurrent, earthfault & under frequency over frequency protection.

Outgoing Feeders:- (a) 3 no. MCCB 250Amp / 4P /36KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (b) 3 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (c) 2 no. MCCB 63Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (d) 2 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (e) 2 no. of Spare Compartment for 4P MCCB, (f) 2 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (g) 1 no. MCCB 100Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (h) 1 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (I) 3 no. MCB 40Amp /4P /10KA, Note:- (i) The panel as described above, specified shall be fabricated/ constructed to the entire satisfaction of Garrison Engineer. Panel shall also be approved by Garrison Engineer. (ii) To ensure safety, reliability and accountability of component co-ordination, all major components such as circuit breakers, contactors and enclosure system described in item/specified should preferably from a single manufacturer. OEM shall preferably be manufacturer of aforsaid components and switchgears. (iii) The OEMs listed in List of makes shall not authorise any other channel partner/sub vendor to manufacture LT panels on their behalf. (iv) OEMs manufactured LT panels only shall be accepted. In addition Factory acceptance test (FAT) shall necessarily be carried out. (v) The consolidated rate for Srl No. 95.00, 95.10, 95.20 & 95.30 shall be quoted against Srl No. 95.00 of BOQ.

APFC PANEL Supply, fixing, connecting and testing of OEM Manufactured APFC Panel with 7% Aluminium reactor of capacity 60 KVAR (Output) @ 440Vac. The stage ratings shall be 5 KVAr X2 + 1 x 10 KVAR + 15 KVAR +1x25kvar + .The APFC Panel shall be fully type tested at an Independent Laboratory and shall comply with IEC 61439-1&2 and IEC 61921, IS-16636-2017.The degree of protection of enclosures system of the APFC Panel shall be min. IP41 in accordance with IEC 60529.The capacitor bank shall be Internet of things (IoT) enabled and communicable/ integrable with BMS The APFC Panel shall be (Indoor) type conforming to IS13341:1992 & IS 13440:1993 floor mounted design, weather, dust and vermin proof suitable for humidity up to 95%. Average daily temperature: +35°C max, Ambient temperature: -5°C to 40°C, Maximum altitude: 2000 m. As equipment shall be comprising of the following:- (A) Insulated bus bar pan assembly made from Aluminium and rated of 300 Amps capacity. The short circuit withstand capacity shall be 50 KA / 1 Sec (Icw) for the main bus bar and the rated impulse withstand voltage shall be 6 KV. ( B) The incomer of the APFC Panel shall be a 200 Amp, MCCB, 3P, 50kA TMD type with O/L & S/C protection, Ics = 100% Icu, MCCB shall have standard extended rotary handle, spreaders, phase barrier. MCCB shall be of certified design confirming to IEC 60947-1,2 & 3. (C) Capacitor Units: The capacitor unit shall be metalized polypropylene film with Zn / Al alloy. The capacitors shall be encapsulated in an aluminium can. The capacitor unit shall have a rated voltage of 525V and shall have a maximum over current capacity of: 2.5 In. The capacitor unit shall have a built in 3 phase over pressure protection and shall have discharge resistors (50V in 1min) factory fitted and shall be tamper proof. Capacitance Tolerance -5%, +10%. Maximum permissible over voltage 1.1 x Un, 8 h every 24 h. The capacitor unit shall be of certified design confirming to IS-13340-1993, 13341-1992 & IEC -60831-1&2.

APFC PANEL (Contd....) (D) Short-circuit and Overload Protection: Each stage of the APFC Panel shall have a suitably rated MCCB for short-circuit and overload protection. The over-current setting shall be adjustable & Breaking capacity Ics=> 36kA. The MCCB shall be of certified design confirming to IEC 60947-1, 2 & 3. (E) PF Regulator/ APFC Relay: Advanced Range PF Regulator / micro-processor based APFC relay having 8 steps with a LCD Display, Voltage Range: 90V - 550V, 50 / 60Hz, CT Input: 1A/5A with a built in RS 485 communication port. The PF Regulator shall be of certified design confirming to IEC 61326. Approved Makes- ABB / Schneider / Siemens / L&T make only. (F) Stage Contactor: The capacitor duty contactors shall be rated for 230 Volts AC and shall be 3-pole type and shall be employed for switching 'on' and switching 'off' operations in capacitor banks. The contactor shall be AC- 3 duty type. The contactor shall be of certified design confirming to IEC 60947-1 & 4-1. (G) Reactor: - Harmonic block reactors Al wound with 7 % filtering factor shall be connected in series with each capacitor stage and shall be of iron cored type. The Reactor should be equipped with Thermal Switch inside the Winding which should cut-off the respective contactor in case of Over-temperature. Tolerance of reactors shall not exceed +/-3% of rated value. The reactors shall be of certified design confirming to IEC-60076 - 6. (H) Ventilating fans of required size shall be sued to dissipate the heat produced by the capacitor bank components like the capacitor units, reactors, contactors, breakers etc. The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory should be submitted along with the offer.

APFC PANEL (CONTD...) Note:-The APFC Panel described as above complete in all respect as per specification enclosed, up to the entire satisfaction of Garrison Engineer.To ensure safety, reliability and accountability of component co ordination, all the major capacitor bank components such as capacitor units, de tuning reactors, PF controllers, circuit breakers, contactors and the enclosure system called for in this specification should preferably be from a single manufacturer. The OEM shall preferably manufacturer PFC components and switchgear.The OEM's specified cannot authorize any other partners / sub vendors to manufacture APFC Panels on their behalf. The APFC Panel manufactured by OEM's only will be accepted & factory acceptance test ( FAT ) has to be carried out. Note :- The consolidated rate for Srl No. 96.00, 96.10 & 96.20 shall be quoted against Srl No. 96.00 of BOQ.

LT PANEL Supply & erection testing and commissioning of indoor type LT PANEL with Aluminium TPN electrolytic grade Busbar 400Amp self standing indoor cubical main control confirming to as per IEC-61439 - 1 & 2 : Specification for cubical panel fabricated out of 2mm thick CRCA sheet having with base frame made M.S sheet duly dust and vermin proof, powder coated. The panel should be complete in all respect as desired by the Garrison Engineer of the work. All MCCB's should be Thermal Magnetic / Microprocessor Adjustable type, Class II Front Facia with cross bolt terminals as Single Frame from MCCB Rating 32Amp to 250Amp, MCCB 400Amp / 630Amp as Single Frame. All MCCB's should have aux. contact for ON /Trip Indication on Panel. The Electrical Life of MCCB should be as follows : Upto 250Amp Rating MCCB's as 10000no. Electricals operations & 400Amp Rating - 6000no. Electrical operations & 630Amp - 4000no. Electrical operations. All Multifunction meters should be with RS485 Port (Class 0.5S) with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Runhrs, ON hrs, Interupts, Incomer :- (a) 1 No. MCCB 250Amp / 4P /36KA with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (b) 1Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's, (c) 1 Set of Multifunction meters should be with RS485 Port (Class 0.5S) with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Runhrs, ON hrs, Interupts,

LT PANEL (Contd....) (d) 1 Set of CT's of class 0.5 , (e) 1 Set of R,Y,B , (d) ON , Trip indication 24VDC only with Control MCB of 2Amp DC. Outgoing Feeders:- (a) 2 no. MCCB 63Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (b) 2 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (c) 1 no. MCCB 125Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (d) 1 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (e) 1 no. MCCB 200Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (f) 1 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (g) 2 no. MCB 40Amp /4P /10KA, Note:- (i) The panel as described above, specified shall be fabricated/ constructed to the entire satisfaction of Garrison Engineer. Panel shall also be approved by Garrison Engineer. (ii) To ensure safety, reliability and accountability of component co-ordination, all major components such as circuit breakers, contactors and enclosure system described in item/specified should preferably from a single manufacturer. OEM shall preferably be manufacturer of aforsaid components and switchgears. (iii) The OEMs listed in List of makes shall not authorise any other channel partner/sub vendor to manufacture LT panels on their behalf. (iv) OEMs manufactured LT panels only shall be accepted. In addition Factory acceptance test (FAT) shall necessarily be carried out. (v) The consolidated rate for Srl No. 97.00 & 97.10 shall be quoted against Srl No. 97.00 of BOQ.

LT PANEL(FOR BORE WELL) Supply & erection testing and commissioning of indoor type LT PANEL with Aluminium TPN electrolytic grade Busbar 400Amp self standing indoor cubical main control confirming to IEC 61439-1 & 2 : Specification for cubical panel fabricated out of 2mm thick CRCA sheet having with base frame made M.S sheet duly dust and vermin proof, powder coated. The panel should be complete in all respect as desired by the Garrison Engineer of the work. (The panel should be fabricated by the CPRI tested manufactures ) Incomer :- (a) 1 No. MCCB 160Amp / 4P /36KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (b) 1Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's, (c) 1 Set of Multifunction meters should be EM6400 with RS485 Port or Equivalent in (Class 0.5S, with RS485 Port, with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Runhrs, ON hrs, Interupts, (d) 1 Set of CT's of class 0.5 . (e) 1 Set of R,Y,B , ON , Trip indication 24VDC only with Control MCB of 2Amp DC.

LT PANEL (Contd....) Outgoing Feeders:- (a) 1 no. MCCB 125 Amp / 4P /25KA / ICS=100% ICU, with Adjustable Thermal Magnetic Overload Setting 0.7 - 1 In. (b) 1 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (c) 1 no. Spare Compartment for 4P MCCB, (d) 1 Set of Aux. Contact for ON / TRIP along with Shunt + Extended Rotary Handle for MCCB's (e) 2 no. MCB 40Amp /4P /10KA, (f) 125 Amps Autochangover arrangment for DG set supply. Note:- (i) The panel as described above, specified shall be fabricated/ constructed to the entire satisfaction of Garrison Engineer. Panel shall also be approved by Garrison Engineer. (ii) To ensure safety, reliability and accountability of component co-ordination, all major components such as circuit breakers, contactors and enclosure system described in item/specified should preferably from a single manufacturer. OEM shall preferably be manufacturer of aforsaid components and switchgears. (iii) The OEMs listed in List of makes shall not authorise any other channel partner/sub vendor to manufacture LT panels on their behalf. (iv) OEMs manufactured LT panels only shall be accepted. In addition Factory acceptance test (FAT) shall necessarily be carried out. (v) The consolidated rate for Srl No. 98.00 & 98.10 shall be quoted against Srl No. 98.00 of BOQ.

Lightning arrestors expulsion type having voltage rating 11 KV, rated frequency 50 HZ, nominal discharge capacity 10 KA ( heavy duty ) complete with all fittings, transmission class, suitable for 11000 Volts, 3-phase, earthed distribution system complete all as specified & as directed.

Supply, transporting to site, erecting and fixing in truly verticle position, steel tubular swaged pole, type 410-SP-55 (11 metre long) complete finial taper plug, bolts, nuts, scerws as specified, CI base plate including drilling holes and painting with two coats of aluminium paint externally, providing 30cm wide alternate strips with white and black synthetic enamal paint upto 1.2m height from ground level and numbering the pole (with black and white paint), undergruound part of the pole shall be painted with black bituminous paint complete all as specified and directed. Note: Excavation, earthwork, PCC foundation shall be measured and paid separately.

Supply, fixing, testing and commissioning of air break gang operated switch triple pole mechanically operated outdoor type with all fittings/accessories mounted on and incl 11 KV HT porecain insulator and steel channel frame, GI operated rod 25 mm dia of suitable length with operating mechanism worked from ground level with dropout fuse consisting of 12 Nos insulators ISI marked, horizontal or vertically operated incl locking arrangement for operating handle with and including 7 lever lock with three Keys complete suitable for current rating of upto 400Amps HT 11 KV working pressure complete all as specified and as directed.

Supplying, laying, jointing, testing and commisioning HT 11 KV (E) XLPE cable, insulated, screened, sound compacted aluminium conductor, screening with extruded semi conducting layers, insulation screening with copper tape covers laid up with PVC (ST-2) extruded inner sheathed GI strip armoured PVC (ST-2) out sheathed, ISI marked with IS-7098 Part II with amendment, size 3 core & cross section area 95 Sqmm, laid in trenches/pipes/ducts/along poles/walls/ equipment etc complete all specified and directed. NOTE:(i) All the cable shall be embossed with year of manufacturing, meterage at every metre in addition to its own standard makings as per IS i.e. Size, voltage etc. Cable shall also be tested in the presence of Engr-in-Charge after laying in the trench before returning filling in the trench. (ii) Excavation & earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the schedule

Supply/Laying / fixing, jointing, testing and commissioning, LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed of following sizes:-.

4 Core 10 Sqmm

4 Core 16 Sqmm

3.5 Core 70 Sqmm

3.5 Core 120 Sqmm

3.5 Core 300 Sqmm (Note :- Excavation & earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the schedule.)

Supply and fix cable jointing kit, for 11 KV (earthed) grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured alumminum conductor cable of size 95 sqmm complete all as specified and directed.

Supply and fix cable jointing kit, for 11 KV (earthed) grade cable for indoor end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured alumminum conductor cable of size 95 sqmm complete all as specified and directed.

Supply and fix cable jointing kit, for 11 KV (earthed) grade cable for straight through joint, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, alumminum conductor cable of size 95 sqmm complete all as specified and directed.

Unreinforced precast concrete cable cover, confirming to IS-5820 (Latest Edition) class LV, type-1, flat, of size 250mm x 150mm x 40mm for protection of LT cable complete all as specified and directed.

Unreinforced precast concrete cable cover,confirming to IS-5820 (Latest Edition) class HV, Type 1, flat, size 300mm x 180mm x 40mm for protection of HT cable complete all as specified and as directed.

Supply, install, commissioning testing of transformer, energy efficient as per IS-1180 Part-1: 2014 and BEE certified Level-2, step down 11KV/433V, indoor type, copper wound, 200 KVA, with necessary, standard fittings 3 Phase, 4 wire, 50 cycles, oil immersed naturally cooled, vetor group Dyn-11 having primary (HT) voltage of 11 KV and secondary (LT) voltage of 433 V off load tap changing gear to provide volts with tapping on primary side having 7 steps of + 2.5% from (+) 5% to (-) 10% in equal steps of 2.5% each so as to vary voltage on secondary side connected externally and hand operated OFF circuit tape changing switch including first fill of transformer oil, the transformer shall be delta connected on 11KV side & star connected on secondary side with neutral brought out including provn of HT busing on HV (delta connection) side & LT cable box on LV (star connection) side complete all as specified and directed. Note:- Transformer shall be dispatched directly from the factory.

Supply, install, commissioning testing of transformer, energy efficient as per IS-1180 Part-1: 2014 and BEE certified Level-2, step down 11KV/433V, outdoor type, copper wound, 100 KVA, with necessary, standard fittings 3 Phase, 4 wire, 50 cycles, oil immersed naturally cooled, vetor group Dyn-11 having primary (HT) voltage of 11 KV and secondary (LT) voltage of 433 V off load tap changing gear to provide volts with tapping on primary side having 7 steps of + 2.5% from (+) 5% to (-) 10% in equal steps of 2.5% each so as to vary voltage on secondary side connected externally and hand operated OFF circuit tape changing switch including first fill of transformer oil, the transformer shall be delta connected on 11KV side & star connected on secondary side with neutral brought out including provn of HT busing on HV (delta connection) side & LT cable box on LV (star connection) side all as specified and directed. Note:- Transformer shall be dispatched directly from the factory.

M&L for erection of internally and externally hot dipped galvanised 3mm thick steel sheet (grade S355JO) 7 Mtr long smart poles of octogonal cross section with internal camouflaged junction box for incorporating control gears with flush door with necessary locking arrangments having base plate 260x260x16mm to be grouted on suitable size shallow foundation with M-15 type B1 concrete with 750mm long 04 No. 24mm dia bolts and 4mm thick anchor plate mounted with pole top mounting spigot type hot galvanised single arm street mounting bracket single arm bracket 1000mm in length all as per instruction and technical specification of OEM and to the complete satisfaction of Engr-in-Charge.

Supply and Fixing of 45W LED Street Light with System Lumen Efficacy ≥120 Lm/W operating Voltage between 120-270Vac, multistage isolated potted driver, Driver will comply for 440Vac operation ( will sustain for 4 - 6 hrs continuously ), Driver will have cut off at > 300 Vac, IP66 Protection, Power Factor more than 0.95%, of rated maximum forward current, Luminaire intergal driver with 5KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), connecting with PVC copper cable of size 1.5x3 sqmm as per IS 10322 at Least 2 Year on site warranty without any condition complete all as specified and directed.

Supply & fixing solar light 30W LED with 2 days authonomy luminaires outdoor separate 50W solar panel having maintenance free Lithiumion battery, all in one having intelligent charging system which provides back up even on cloudy days automatic ON/OFF inbuilt sensor based on ambient light conditions, IEC certified LED pressure die cast aluminium body for thermal management an IP-65 compliant design Both LED 30W Light and 50W solar panel mounted on 80mm bore light grade GI pipe of 1.2 m long with suitable bracket grouted into the wall in PCC 1:2:4 Type B0 complete all as specified and as directed by Engr-in-Charge.

Earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron 32x6mm earth strip by means of bolts, nuts check nuts and washers of galvanized iron or steel with protection pipe of GI, medium grade 40mm bore, watering pipe 20mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15 cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 80 mm thick precast RCC 1:1.5:3 type A-1 cover duly reinforced with XPM (weight not less than 3 kg/sqm) and frame including all excavation and earth work etc. complete all as specified and directed. NOTE : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe shall be deemed to be included in the rate of this item. Extra length shall be measured and paid for separately.

Earthing complete with GI earthplate electrode 600mm x 600mm and not less than 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to GI strip of size 25x4mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 of SSR Part-1 2009, connected to equipments all as specified and indicated complete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick) and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connected all as specified and as directed by Engr-In-Charge. NOTE : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe shall be deemed to be included in the rate of this item. Extra length shall be measured and paid for separately.

Earthing complete with copper earthplate electrode 600mm x 600mm and not less than 3.15 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to copper strip of size 25x3mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 of SSR Part-1 2009, connected to equipments all as specified and indicated complete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick) and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connected all as specified and as directed by Engr-In-Charge. NOTE : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of copper strip & GI protection pipe shall be deemed to be included in the rate of this item. Extra length shall be measured and paid for separately.

Labour for boring underground for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and 100mm bore GI tubing in soft/loose soil complete all as specified.

M&L sand filling in trenches for cushioning of HT/LT/JFC UG cable 8 cm before laying of cable and 15 cm after laying of cable including compacting after filling complete all as specified and directed. Note:- For payment depth of punned sand shall be measured. (Quantity is for ext elec and fire alarm)

Supply and fixing of Static Discharge Handles made out of 20mm dia, 500mm length electrolytic copper solid rod fixed on wall with Dough moulding compound (DMC) insulator, brass spacers and connected to the static discharge conductor/ 20 X 3 mm copper strip with brazing all as speicfied and directed.

FIRE ALARM AND FIRE FIGHTING WORKS Suupply, Installation Testing & Commissioning of microprocessor based Networkable Analogue Addressable 4 loop Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have expandable capacity up to 16 loops. The Panel must have Full colour 800 x 480 LCD with resistive touch screen and automatic backlight dimming. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The panel shall have an event log of minimum 10,000 events @ 1 second resolution, Filterable and Printable. The Panel shall have Three access levels. Panel shall support upto 5000 Cause & Effects entries, with upto 20,000 inputs controlling & 20,000 Controlling outputs across the network. The Panel shall have capability for Peer to Peer networking through RS485 network card. The Panel must have 4 inbuilt programmable sounder circuits, each circuit rated at 2.5A.The Panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable relay outputs. The Panel shall have up to sub-addressable 512 programmable Inputs/Outputs via optional RS485 COMMS serially connected expansion cards. The Panel shall have 240 V AC power supply along with automatic Battery Charger. The Panel shall be fully expandable via common plug in loop driver boards. The user shall have a choice of using the panel with 5.25 Amp or 10.25 Amp power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The Panel shall have configurable via USB port to PC or memory stick. The Panel shall have dedicated RS232 serial port for optional printer.The Panel should Automatically shutdown the power supply of air conditioning in case of any kind of fire in each loop. Panel Should Include Battery backup with 2 Nos. 12 Volt Battery upto 6.0 hours complete all as specified and as directed.

Supply, installation, testing & commissioning of certified to EN-54 Addressable Manual Pull Station Addressable integrated design all as specified and directed. • All metal construction • Single action • Bi-colored status LED indicates Standby and Alarm conditions • Address should be programmable in EEPROM • Address can be programmed when installed. complete all as specified and as directed .

Supply, installation, testing & commissioning of certified to EN-54 Isolator Base/ Module fully monitored for short circuit Ability to detect short circuit conditions, Design should be for use with analog sensor, should have Built-in LED indication upon short circuit condition, Must contain a security locking tab for tamper protection certified complete all as specified and as directed.

Supply, installation, testing & commissioning of of Addressable Monitor Module certified to EN-54, Single input contact monitor, Should be programmed to monitor Normally Open (NO) or Normally Closed (NC) contacts, Should operate on Class A or Class B SLC loop complete all as specified and as directed.

Supply, installation, testing & commissioning of Fire Alarm certified to EN-54 HOOTER red colour, 90 dBA at 10 feet with power supply arrangement complete as required and suitable for wall/ceiling mounting.and as per specifications complete all as specified and as directed.

Supply, installation, testing & commissioning of The Supervised addressable Dual relay output / control module shall be certified to EN-54 2A @ 24 VDC Power Limited and must be must be addressed from 1 – 127 prior to installation on the SLC loop. Modules using binary jumper or dip switch setting are not acceptable. The device address shall be electrically programmable and stored in EEPROM. A bi-colored LED shall indicate device status. Operation parameters are maintained by the module, and individual communication with the control system during emergency conditions is not requiredcomplete as requiredas per specifications complete all as specified and as directed.

Supply, Installation Testing & Commissioning of Active Repeater Panel to be integrated with Fire Alarm Control Panel,larger display Full colour 800 x 480 LCD with resistive touch screen and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels.Panel Should Include Battery charger with 2 Nos. 12 Volt Battery Backup upto 6.0 hours.Panel should compliant with EN54-2 complete all as specified and as directed.

Supply, laying, testing and commissioning of Armoured Cable for fire detection and alarm sysrem with 1.5Sq.mm 6 core annealed tinned multi strand copper conductor PVC Insulated flexible FRLSH wire in MS conduit as required complete all as specified and as directed.

Supply, laying, testing and commissioning of cabling for fire detection and alarm system with 1.5Sqmm 2 core annealed tinned multi strand copper conductor PVC Insulated flexible FRLSH wire in MS conduit as required complete all as specified and as directed.

Providing and fixing of 16 Gauge MS Conduit in size 20mm dia including the cost of junction box bends, elbow, sockets, Tee and GI flexible conduit to connect from ceiling to false ceiling etc laying in slab, cutting chasses and making good or surfaces mounting including all fixing hardware complete all as specified and as directed.

Supply install test and commissioning of Hand operated floor mounting siren with an audio range of 3.5 KM all in weather proof enclosure near motor complete all as specified and as directed.

AIR CONDITIONING PLANT:- Supply, installation, testing & commissioning of water cooled scroll chiller units having Nominal capcity: 75 TR (2x37.5 TR working +1x 37.5 TR standby), with Multi Hermetically sealed scroll compressor. The Unit shall have compressor mounting arrangement on rubber gromments with metal sleeves. water shell & tube type condenser. DX type Evaporator duly insulated. Thermostatic expansion valve with External equaliser. Unit shall have filter dryer , pressure switch ie HP/LP, electronic thermostat, flow switch at chiller, integral refrigent piping & wiring, essential accessories required, automatic and safety control mounted in central console electronic microprocessor with internal overload protector complete including hot water generator, chilled water, hot water and condenser water pumps and piping, induced draft cooling towers, AHU's'supply and return air ducting, electrical panels/cables and all accessories/items complete as per Annexure 'A' to BOQ, as stipulated in Particular specifiactions & list of drawings and as per under mentioned notes :- Notes:- (i) Minimum technical parameters/requirements to achieve design conditions for rooms/areas of the audotorium buildings are enclosed as per Annexure 'A' to BOQ, Particular specifications and drawings mentioned in list of drawings. (ii) Contractor shall check the above technical parameters keeping in view the inside design conditions as specified/ building drawings and if these are found correct and found acceptable to achieve the required inside conditions, the confirmation to this effect shall be rendered in writing with proof check within 30 days from acceptance of tender.

AIR CONDITIONING PLANT (Contd....) (iii) In case any deviation is observed while checking technical parameters wrt capacity of plant, variation in quantity of items or change in specifiaction to achieve the required specified inside conditions, the contractor shall provide complete design data comprising of suitable matching equipments and accessories within 30 days from the date of acceptance of tender in order to obtain approval of accepting officer prior to execution of work and these changes shall be implemented by the contractor without any financial effect and amount quoted by the contractor shall be final for the purpose of execution of work. NOTES FOR CENTRAL AIR CONDITIONING PLANT 1. This is a turn-key job where the responsibility of the contractor will include Design, supply, installation, testing and commissioning of minimum 2 x 37.5 TR, water cooled, scroll chilling machines fitted with hermetically/ semi-hermetically sealed compressors, multi/single circuit chiller, water cooled shell & Tube type condensers, microprocessor based control panel, suitable for R-134 as refrigerant, shell & tube insulated evaporator, expansion device, control mechanism with control cables of appropriate rating and length for interconnecting chiller unit control panel, AHU and Electric control panel suitable capacity for actual cooling capacity The design shall be as per design parameters given in the tender documents and shall include refrigeration unit comprising of compressor, condenser, expansion valve evaporator or chiller and interconnecting refrigerant piping. chilled water pump sets, condenser water pump ,under deck insulation , Air Handling Unit, cooling tower, piping for chilled water , valves, strainers, gauges, ducting arrangement , cables for connection, trays, rubber mat, LT panel, earthing and other connected items required for smooth functioning of plant.

NOTES FOR CENTRAL AIR CONDITIONING PLANT 2. The tenderers/bidders shall note that the work of Air Conditioning Plant shall be executed through specialist firm as approved by GE. The following requirements shall also be ensured during execution of the work:- (a) Submission of all documents required according to the contract. (b) Preparation of the design and drawings for all the work within one month of acceptance of tender. The contractors shall be fully responsible for the smooth functioning of the Plant. These designs and drawings, shall be approved by the Accepting Officer. (c) Details of drawings, detailed plant layout with all mechanical and electrical equipments to be installed at various/ different levels at second stage within 10 days from the date of placement of work order. (d) Where specifications for any item of work are not given in MES schedule or particular specifications, specifications as given in relevant Indian Standard or code of practice shall be followed. (e) Tenderers intention is invited to relevant clauses of particular specification. If any provision not covered under Sch ‘A’, Special conditions, particular specifications but mentioned in relevant clause of SSR Part I (2009) and is required for completion of work then same shall be taken into consideration and no extra cost shall be paid to the contractor on this account and in such event decision of Accepting Officer shall be final and binding. (f) Any damage caused to the installation or any part thereof except for the accepted risks as per condition 48 of IAFW-2249 shall be made good by the contractor under his own arrangement as per the specifications given in the contract without any extra cost to the Government. (g) Accepting officer at his discretion may depute an expert for checking the performance of the Air Conditioning Plant. The contractor shall provide all major repairs/ overhauling etc as per the recommendation of expert and the same shall be notified to the GE immediately on occurrence and no extra shall be paid on this account.

NOTES FOR CENTRAL AIR CONDITIONING PLANT(Contd....) (h) The contractor shall ensure that the work is maintained in accordance with the manufacturer’s instructions, procedures and relevant safety codes. (i) The tenderer and the MES as the case may be shall consult with each other and jointly decide on the scheme for protection of the interconnection line(s) and of the facilities at both the ends. All air conditioning equipments installed shall be consistent with the orders of IEM detailed by Accepting Officer. (j) Notwithstanding the provisions of this agreement, the MES will not be responsible for any damage that may occur to the tenderer with the MES system. (k) Charges shall be borne by the contractor for commissioning, testing as well as routine checking. Notwithstanding such checking/ verification in any event, the MES shall not be responsible for any damage caused to the tenderer on account of any mistake in such checking/ verification. (l) All safety measures as per IS provisions and as per laid down procedure of entire Central Air Conditioning Plant shall be the responsibility of the contractor. (m) The yard sticks to regulate RARs payment against Air Conditioning Plant shall be got approved from CWE by the GE after technical check and following procedure shall be adopted :- (i) Stage wise yardstick %age for the Air Conditioning Plant shall be approved by CWE during currency of work. (ii) Contractor shall submit yard stick for Air Conditioning Plant in duplicate to GE within one month of acceptance of tender, including percentage payment to be made for each stage of theAir Conditioning Plant alongwith supporting details i.e detailed estimate, stage wise abstracts etc. (iii) There may be certain changes in yard stick percentages as submitted by the contractor while approving the yardstick for saidAir Conditioning Plant due to market rates of various materials & due to policy of department of with-holding sufficient amount for later stages of the work in Air Conditioning Plant. Contractor shall not have any claim on this account and percentage payment to be made for each stage as approved by the CWE shall be final & binding on the contractor.

NOTES FOR CENTRAL AIR CONDITIONING PLANT(Contd....) (n) Warranty: All the air conditioning equipments shall be warranted against any manufacturing/ design/ installation defects for a minimum period of 5 years from certified date of completion. (o) The consolidated rate for Srl No. 134.00, 134.10, 134.20, 134.30 & 134.40 shall be quoted against Srl No. 134.00 of BOQ.

SCADA SYSTEM Supply Installation, Testing & Commissionin of SCADA System for 3X AC Igloo Shed - AT 33 FAD Dappar inclusive of :- (a) SIEMENS WinCC SCADA 2048 Tags inclusive of Tag Logging,Graphic Builder, Alarm Log, Trends, Customised Reports etc -01 Set (b) IBM Compatible PC Workstation(Lennovo/HP/DELL) for SCADA Inclusive of following devices -01 Set :- (i) 15 Processor (ii) 8 GB RAM (iii) 21'' Monitor (iv) Keyboard & Mouse (v) Windows 2000 Professioinal (MS Office & other softwares is not included) (vi) Compatible Antivirus with 1 year subscription. (c) INVOTEC make SS Immersion Temperature Sensor with Transmitter & SS304 thermowell:-12 Nos

(d) Chiller Status Panel using SIEMENS Controller for Mointoring of Status of following devices -03 sets :- (i) 3 nos Chiller with Modbus RTU Protocol (ii) 3 nos Chilled Water Pumps (iii) 2 nos Hot Water Generators on Modbus RTU Protocol (iv) 3 nos Hot Water Pumps (v) 2 nos Hot Water circulating Pumps (vi) 1 no. Cooling Tower (vii) 1 no. APFC System (viii) 1 no. multifunction Meter on modbus RTU (ix) 4 nos Chilled Water & Hot Water Temperature Sensors

(e) AHU Status Monitoring on Existing SIEMENS AHU PLC Panel using Profinet Protocol for Monitoring the Status of following devices -03 Nos :- (i) 1 no Supply Air T & RH Sensor (ii) 1 no Return Air T & RH Sensor (iii) 1 no. Duct Smoke Detector (iv) 1 nos Air Velocity Aensor (v) 5 nos Fire Damper ON/OFF Status (vi) 2 nos. DP Switch for Filter Status (vii) 1 nos. Outdoor T& RH Sensor (viii) 2 nos Chilled & Hot Water Sensor Status (ix) Incomer Breaker ON/OFF /Trip Status (x) VFD On/Off/Trip/Set Speed & Speed Feedback (xi) HMI Parameters:- 20 nos. (f) Network Panel with SIEMENS Controller, SIEMENS PROFIBUS Module, SIEMENS SCALANCE Switch,wall mount MS Powder Coated Enclosure, SMPS & required accessories -04 Nos (g) Profibus Repeater Panel with SIEMENS PROFIBUS Repeater Module & Self - Standing Outdoor SS Enclosure with Rain Protection Canopy -02 Nos

(h) INSTALLATION, TESTING & COMMISSIONING- (i) Engineering, Designing & documentation of the system & Submittal of the same for approval prior to execution of the job. (ii) Integration of the System with the Existing AHU Control System and Installation of the new system as per this BOQ at site. (iii) Supply, Laying , Loop Checking, Tagging, Glanding & Termination of the Control & Communication Cables as per the BOQ mentioned below. (iv) Deputation of SCADA Expert Engineer for on-site customisation of SCADA Screen & SCADA System. (v) Deputation of PLC Programmer Engineer for on-site programming of PLC & System commissioning. (vi) Training of End user for usage of the System.

(vii) SIEMENS Profinet Network Cable with Profinet connectors laid from Chiller Status Panel to Network Panel & AHU Control Panel to Network Panel, Inclusive of Laying in 25mm PVC Conduit with required accessories & SIEMENS make Industrial Grade R J 45 Connectors = 300 RM (viii) Control Cabling =4 Core 0.5mm2 Shileded Flexible Cable Laid in 20mm dia PVC Conduit as per Cable Entry Glands = 3465 RM (ix) SIEMENS PROFIBUS Communication cable & 3 Core 1mmsq Flexible Power Cable both laid inside 25mm UPVC Pipe, Termination & necessary Connectors, Loop Checking & Commissioning =1105 RM APPROVED SYSTEM HOUSE- (i) INVOTE AUTOMATION PVT LTD,MUMBAI. (ii) S.R.SYSTEMS PVT.LTD,MUMBAI. (iii) MULTIQUADRANT INDUSTRIAL CONTROLS(I) PVT LTD,NASHIK. Note :- (i) Civil Work- Digging, refilling, re-finishing etc not in Scope. (ii) The consolidated rate for Srl No. 135.00,135.1,135.2,135.3 & 135.40 shall be quoted against Srl No. 135.00 of BOQ.

SUMMER APPLIANCES Supply, installation,testing and commissioning of self standing Water cooler fully stainless steel,puff insulated body, electric driven single phase 230 Volts, 50 Hz having storage capacity of 80 Ltrs and nominal cooling capacity of 40 Ltrs per hour with reciprocating compressor, eco friendley R-134A refrigernt, externally mounted thermostat for easy regulating temperature with extra large stainless steel water tray for fast drainage of water complete all as specified and as directed.

Supply, installation,testing and commissioning Desert Air cooler, electric driven single phase having having nominal air flow capacity of 4000 Cum per hour factory made out of MS sheet powder coated, electric driven capacity 170 watt, 230V (single phase ), having approx storage capacity of 60 Ltrs with MS fabricated stand made out of 40 x 40 x 5mm angle frame duly grouted in wall, painted with 2 coats of synethetic enamel paint over a coat of red oxide complete all as specified and as directed.

Supply, installation,testing and commissioning voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input varriation between 170 V to 290 V with output voltage stablized at 230 V with accuracy of + 2.5% and of capacity 1.0 KVA complete all as specified and as directed.

DG SET Supply & installation of silent CPCB approved 160 KVA TP Diesel Generating Set having diesel engine Liquid cooled, Electric start, four stroke, cold starting, TCI Aspirated, compression ignition, totally enclosed diesel engine with electronic governor , direct coupled with 160 KVA Three Phase alternator at 1500 RPM, 0.8 lagging power factor, providing Three Phase 415Volts suitable for 50 Hz, H class insulated winding, Close-direct-coupled, Self-excited and self-regulated type, screen protected, mounted on rigid MS sheet channel base-frame. The alternator shall confirm to IS: 13364, IS: 4722, BS5000, IEC: 34 and suitable for tropical condition. having fitted inside Canopy, fabricated out of 1.6 mm CRCA Sheet, cubical type, totally enclosed, Powder Coated, Control Panel and all accessories in- housed in a acoustic enclosure – sound proof canopy. Make: Cummins/ Kirloskar Green/ Powerol Mahindra & Mahindra/ Crompton Greaves. (A). Alternator :- Standard design alternator rated at 160KVA net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with widing in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613/5000 and shall be inposition to generate supply with frequecy regulation with in + 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/5000/ IS - 4722. (i) Insualation class - 'H' (ii) Temparature rise Class - 'H' (iii) Excitation : Self Excited

DG SET (Contd....) (iv) Regulation performance: The voltage is kept constant with + 1%, manual voltage adjustment within + 5% (v) Frequency regulation + 1% (B) Diesel Engine: - Adquate capacity of Diesel engine as accepted by the accepting officer based on manufacturers technical details water cooled to drive independently above alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Moulded radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven (iv) Exhaust System :- Exhaust System complete with exhaust piping of MS light grade 150mm dia upto 1 meter away from the enclosure, covered with asbestos rope and aluminium foil complete within the enclosure for safe exhaust without transforming vibration to the wall of the enclosure with Exhaust gas turbo charger type, Exhaust manifold Silencer : Residual type Bellows (v) Fule System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governer for 1% speed /frequecy regulation, Fuel filters, Fuel hoses. (vi) Lub oil System :-Lubricating oil filter, Lubricating oil pump (vii) Air Intake System :- Air intake Manifold,Air cleanler dry type

DG SET (Contd....) (viii) Governor :- Electronic Governor (ix) Starting System :- Electric Self starter with maintenance free battery including battery charging alternator. (C) Batteries :- Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi-stranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified of Make as per OEM. (D) Starter gear ring:- Start and stop push button, Ignition key / Switch, Handling and operation : Salient features of accessories shall be as under. Radiator with blower fan, Corrosion inhibitor coolant, Paper element filters for fuel, lub oil and by pass. Electronic governor controlled direct fuel injection system, Fly wheel housing and fly wheel. (E) Generator Monitoring Control Panel : - Comprising of all standard items as mentioned under this schedule or as per standard practice ignition key switch and start / stop arrangement, indications for Engine parameters, hour run meter, RPM meter, Engine oil pressure indicator, water/coolant temperature indicator, Battery volt display including suitable size MCCBs and multifunctional meter. (i) Safety Controls : - Engine low lube oil pressure high water temparature and over speeding of engine. (ii) Coupling arrngement : - Flexiable coupling, fly wheel to suit flexiable coupling. (iii) Accessories :- AVM Pads built or separtely mounted to manufactrer base frames.

DG SET (Contd....) (iv) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes. (v) MS pipe line to and from the fuel tank to the DG Set. (F). Civil Works :- All civil works including PCC plat form as per manufacture's design also 30 cm above the ground. The depth of the foundation and PCC as recommended by the manufacturer. (G) Rubber Matting of LV grade 19mm thick of suitable size chequred type ISI marked to be laid in front of control panel should be provided. Note:- The contractor shall arrange for artificial load for testing for final testing of DG Set at site and the cost is deemed to be including in above offer. (H) Accoustic Enclosure:- Manufactured by OEM suitable for 160 KVA DG Set. (i) NAL approved as per CPCB (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board. (iii) The generating set battaries and control panel should be inside the enclosure. (iv) Fuel tank should be out side the enclosure in the sub station building. (v) The accoustic should be composite in construction and fully assembled integral unit. (vi) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated plat form. (vii) The DG Set should be provided with external Emergency stop push button.

DG SET (FOR BORE WELL) Supply, installation, commissioning and testing silent CPCB approved 125 KVA TP Diesel Generating Set having diesel engine Liquid cooled, Electric start, four stroke, cold starting, TCI Aspirated, compression ignition, totally enclosed diesel engine with electronic governor , direct coupled with 125 KVA Three Phase alternator at 1500 RPM, 0.8 lagging power factor, providing Three Phase 415Volts suitable for 50 Hz, H class insulated winding, Close-direct-coupled, Self-excited and self-regulated type, screen protected, mounted on rigid MS sheet channel base-frame. The alternator shall confirm to IS: 13364, IS: 4722, BS5000, IEC: 34 and suitable for tropical condition. having fitted inside Canopy, fabricated out of 1.6 mm CRCA Sheet, cubical type, totally enclosed, Powder Coated, Control Panel and all accessories in- housed in a acoustic enclosure – sound proof canopy. Make: Cummins/ Kirloskar Green/ Powerol Mahindra & Mahindra/ Crompton Greaves. (A). Alternator:- Standard design alternator rated at 125 KVA net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with widing in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613/5000 and shall be inposition to generate supply with frequecy regulation with in + 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/5000/ IS - 4722. (i) Insualation class - 'H' (ii) Temparature rise Class - 'H'

DG SET (FOR BORE WELL)(Contd....) (iii) Excitation : Self Excited (iv) Regulation performance: The voltage is kept constant with + 1%, manual voltage adjustment within + 5% (v) Frequency regulation + 1% (B) Diesel Engine: - Adquate capacity of Diesel engine as accepted by the accepting officer based on manufacturers technical details water cooled to drive independently above alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Moulded radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven (iv) Exhaust System :- Exhaust System complete with exhaust piping of MS light grade 150mm dia upto 1 meter away from the enclosure, covered with asbestos rope and aluminium foil complete within the enclosure for safe exhaust without transforming vibration to the wall of the enclosure with Exhaust gas turbo charger type, Exhaust manifold Silencer : Residual type Bellows (v) Fule System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governer for 1% speed /frequecy regulation, Fuel filters, Fuel hoses. (vi) Lub oil System :-Lubricating oil filter, Lubricating oil pump (vii) Air Intake System :- Air intake Manifold,Air cleanler dry type

DG SET (FOR BORE WELL)(Contd....) (viii) Governor :- Electronic Governor (ix) Starting System :- Electric Self starter with maintenance free battery including battery charging alternator. (C) Batteries :- Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi-stranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified of Make as per OEM. (D) Starter gear ring:- Start and stop push button, Ignition key / Switch, Handling and operation : Salient features of accessories shall be as under:- Radiator with blower fan, Corrosion inhibitor coolant, Paper element filters for fuel, lub oil and by pass. Electronic governor controlled direct fuel injection system, Fly wheel housing and fly wheel. (E) Generator Monitoring Control Panel : - Comprising of all standard items as mentioned under this schedule or as per standard practice ignition key switch and start / stop arrangement, indications for Engine parameters, hour run meter, RPM meter, Engine oil pressure indicator, water/coolant temperature indicator, Battery volt display including suitable size MCCBs and multifunctional meter. (i) Safety Controls : - Engine low lube oil pressure high water temparature and over speeding of engine. (ii) Coupling arrngement : - Flexiable coupling, fly wheel to suit flexiable coupling. (iii) Accessories :- AVM Pads built or separtely mounted to manufactrer base frames.

DG SET (FOR BORE WELL)(Contd....) (iv) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes. (v) MS pipe line to and from the fuel tank to the DG Set. (F). Civil Works :- All civil works including PCC plat form as per manufacture's design also 30 cm above the ground. The depth of the foundation and PCC as recommended by the manufacturer. (G) Rubber Matting of LV grade 19mm thick of suitable size chequred type ISI marked to be laid in front of control panel should be provided. Note:- The contractor shall arrange for artificial load for testing for final testing of DG Set at site and the cost is deemed to be including in above offer. (H) Accoustic Enclosure:- Manufactured by OEM suitable for 125 KVA DG Set. (i) NAL approved as per CPCB (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board. (iii) The generating set battaries and control panel should be inside the enclosure. (iv) Fuel tank should be out side the enclosure in the sub station building. (v) The accoustic should be composite in construction and fully assembled integral unit. (vi) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated plat form. (vii) The DG Set should be provided with external Emergency stop push button.

EOT-CRANE Design, supply, errecting, testing and commissioning of flame proof, electrically operated over head traveling crane 4 MT capacity double girder type class-II with necessary steel structure track rails for LT & CT, electric motors and gear driven, long, cross travel/hoisting mechanism, VVVF control drives for normal and micro speed control (micro motion only for hoist), operated from floor with pendent push button controls, movable, independent of crab position including provision of track rail/square bar for a bay length 36 mtr approx for long travel and PVC coated DSL shrouded conductor system 415 volts, 3 phase, 4 wire of appropriate capacity including current collector, supporting brackets, insulators and other standard fixtures and fittings carriage with double flanged cylindrical wheels, standard hook black, steel wire rope, service platform, ladder, suitable brakes for all motions flexible trailing cable system for complete length with all standard fittings and fixtures, buffers including all safety devices and interlocking etc to meet the following requirment conforming to IS:3177, IS-807, IS-2148, IS-3938, IS-2062 and IS-3815 complete all as specified and directed:- (i) Cross span : 18 m + 5% (ii) Long span : 36 m + 5% (iii) Class of duty : Class-II (indoor) Crane as per IS:2148 with latest amendments (iv) Location : Indoor (v) Controls : From floor level through pendent push button (vi) Lift : 4.50 m (approx) (vii) LT motor : Twin drive of suitable capacity each with gear box (viii) CT motor : of suitable capacity (ix) Hoisting motor : of suitable capacity

EOT-CRANE (Contd....) (x) Long travel speed : 10 metre/minute (approx) (xi) Main Hoisting speed : 03 metre/minute (xii) Slow Hoisting speed : 0.2 metre/minute (Achieve through AC drive) (xiii) Cross travel speed : 05 metre/minute (approx) (xiv) Main Girder : Box type (xv) Wheels : MS steel with bronze coating on tread (xvi) Operation : Pendent push button switch from floor (xvii) Power supply : 415 volts 3 phase (xviii) Accessories for electric supply : Festoon type flame proof cables for LT& CT motion (xix) Speed control of Hoist motor shall be through VVVFD. All motors, limt switches, brakes, pendent push button and panel junction box shall be flame proof. (xx) 2 Nos of Flame proof light in each crane, Auto stop facility, Anti collision device (xxi) Gantary rail ISMB of minimum size 300x140mm alongwith suitable size of square bar welded on top of ISMB including M.S. base plate 16mm thick for fixing in column with suitable size of bolt, nuts , washers, total length of gantary 72 mtr (for 1 igloo) for 2 EOT crane. (a) BRIDGE:- It shall be as per IS-807/IS-3177/IS-800 and standard I beam of MS rolled steel sections bolted to end bridge. Make:- SAIL/TISCO/ESSAR. (b) END CARRIAGES:- Box type and fabricated from rolled section. (c) LT WHEELS:- Two Nos, staright tread/type, EN-8 forged steel, double flanged LT wheels to be provided in each of the two end carriage, These wheels shall be supported on steel axles. (d) PINION/AXLES:- Made from EN-9, heat treated carbon alloy steel.

EOT-CRANE (Contd....) (vii) All other electrical equipment should be in flame proof enclosure/ flame proof duly certified by CMRS Dhanbad. (viii) The brakes should be FLP enclosure. (ix) The travels of crane such as long, cross and hoist should be spark Proof. (x) The complet crane should be approved by CMRS Dhanbad for Flame proof application. (xi) The crane should be painted with two coats of flame proof paint over one coat of flame proof primer. (xii) Actual dimension for span/side clearance/head room clearance to be obtained on ground before commencement of fabrication works. (xiii) Quoted unit rate is deemed to include provision of suitable ladder from FFL to crane level for easy access to crane. (xiv) Two numbers of crane should be installed in one igloo and both crane shall have common long travel(72 mtr) Note : (i) Work of EOT crane shall be got executed through specilist Agency approved by Accepting Officer having experience of execution of EOT crane works of similar or higher capacities in Govt Departments/PSUs satisfacorily during last five years. (ii) The consolidated rate for Srl No. 141.00, 141.10, 141.20 & 141.30 shall be quoted against Srl No. 141.00 of BOQ.

RAIN WATER HARVESTING WORKS Drilling pilot bore hole of 150mm dia by rotary drilling method (Direct/ reverse) through rig machine for injection well in any kind of soil strate or rock including disposal of surplus soil/rock to a distace not exceeding 50 metre complete all as specified including deploying required rig machinery. T&P equipment etc complete inclduing transporting of all materials like rig machine, tool and plants, collection of logsamples (drilling/ cutting) and to maintain drill time log book all as specified and directed

Supply, assembling, jointing lowering and fixing in postion PVC plain casing pipe, heavy duty of size 150mm bore with a thickness 7.5 to 8.5mm conforming to IS-4985 having male threads at spigot end and female threads at socket end screwed and socket type in all jointing accessories complete all as specified and as directed.

Supply assemnling, jointing, lower and fixing in position PVC screen casing pipe, heavy duty of size 150mm, wall thickness 7.5 to 8.5 mm conforming ti S-4985 having ale threads at spigot and female threads at socket endscrewed and pocket type in all jointing accessories complete all as specified and as directed.

PVC bail plug assembly suitable for 150 mm nominal bore PVC casing pipe internally threaded and jointed with casing pipe complete all as specied and as directed

Mild steel hosing clamp, made out of 12mm thick MS flat bend to shape for 150mm bore casing pipe with necessary bolts. Nuts and washers at ground level complete all as specified and as directed

PVC well borewell cap 8 mm thick, suitable for 150mm bore having internal threads complete all as specifed and as directed

Development of injection bore well by using air compressor of suitable capacity of removing the drilling mud and finer sediments in the surrounding of borewell screens complete all as specifed and as directed (5 hours for each well)

Supply and packing pea gravel of size 2 mm to 5 mm all around casing pipe and slotted pipe complete all as specified and as directed

DEMOLITION Digging out and removal of Soils of VIFT/ NAT walls (before demolition of RCC/ PCC) to a distance exceeding 250 metre but not exceeding 500 metre and to be deposted where directed at a level n.exc 1.5 metre above the starting point within the Def land complete all as specified and directed.

Dismantling old unserviceable Service wire complete all as specified and directed.

Dismantling and taking out old unserviceable earthing of any type including demolition of concrete, covers etc and excavation as required complete all as specified and directed.

Dismantling old unserviceable aluminium strip of any size complete all as specified and directed.

Dismantling of old unserviceable air termination rod of any type complete all as specified and directed.

Note: For the purpose of arriving at lumpsum amount, the amount of credit sch for buildings and other services i.e Sch 'A' section XV (i.e Rs 7,78,110.00) shall be deducted from the total amount arrived.

SRISHTI INFRASTRUCTURES LIMITED

BANSI BUILDER AND CONTRACTORS PVT LTD

RHG Constructions Private Limited

NAND LAL PURI AND SONS PRIVATE LIMITED

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

GEMINI PROMOTERS AND BUILDERS PVT. LTD.

M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.

ENGINEER CONSTRUCTION PVT. LTD.