Upgradation of District Level Stadium located in Bank Colony, Pakur, Block - Pakur, District - Pakur

Clearing and grubbing road land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness) By manual means in area of light jungle

Dismantling old plaster and pointing in cement or lime and taking out joints to 15mm depth,watering and disposal of unservicable material with all leads all complete. as per direction of E/I.

Dismantling patent stone flooring depth with chisel and hammer including stacking servicable materials in countable stacks with in 15 m lead and disposal of unservicable material with all leads all complete. as per direction of E/I.

Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil item - A ) and disposal of excavated earth as obtained to a distance upto 50 M. including all lift, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-lll) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing ceramic glazed floor tiles of size 300 x 300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry at 3.3 kg per sqm, including pointing the joints with white cement and matching pigment etc complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm dia

110 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

75 mm Single tee with door

110 mm Single tee with door

75 mm Single tee without door

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.80.1 Long pattern W.C Pan of size 580x440 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/L (Approved Brand-ASTRAL/ SUPREME)(Concealed work including cutting chases and making good the wall etc...) (20 mm nominal outer dia pipes)

25 mm nominal outer dia pipes

Polythene water storage tank of mark with cover & suitablelocking system in double layer conforming to IS: 12701- 1996 with latest revision

Bib cock

Providing and laying factory made Chamfered edge cement concrete Paver blocks in footpaths, parks, lawns, drive ways for light traffic, parking etc of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of interlocking Paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per reuired size and pattern, finishing and sweeping extra sand complete all as per direction of E/I 80mm thick CC Paver blocks of M30 grade with approved colour design and pattern

Suuplying, fitting fixing 35 mm thick solid core type non-decorative type single leaf flush door shutter in door and windows with block board core blended with high quality phenol formaldehyde synthetic resin both side commercial veneered of standard make with oxidised iron fiitings such as Higes, tower bolts, handles, cleats and sand block and taxes all complete as per building specifications and directions of E/I

Welded mesh (8 to 10 SWG) 100 to 125 mm square size

Labour for fitting and fixing G.I. woven wire fencing including fixing of post in cement concrete at 2.5M centres including cost of staples (but excluding the cost of cement concrete angle iron posts its cutting and making holes, nuts and bolts) all complete as per building specifications and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, costs of screening materials, scaffolding, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6 mm including cost of fabrication providing necessary locking arrangement with haskal and domny duly fixed in PCC (1:2:4) blocks of required size applying a priming red lead paint over steel work,all taxes complete as per drawing specification and direction of E/I

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two Coats

Providng two coats of dry distemper of approved shed and make over old surface including washing, cleaning and preparing the walls , scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Supplying fitting and fixing M.S. grill made of 20x6mm M.S. flats / square bar as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site , hoisting as per building specification and direction of E/I

Providing Tor steel Reinforcement of 8mm , 10mm, 12mm & 16mm dia. bars as per approved design and drawing with cutting, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position(excluding carriage of bars to work site) all complete as per building specification and direction of E/I. 8mm dia

10mm & 12mm dia

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landing, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts

Mirror Polishing on marble work/Granite Work/Stone work where ever required to give high gloss finish complete.

Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm. thick base of lime morter (1:11) (lime putty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specificationand direction 600 mm X 600 mm size

Providing and laying 25mm thick kotah stone tiles in risers of steps, skirting and pillars of approves size, texture and colour taid over 12mm, thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolilthic finish with approved quality-do-

Providing and laying Double charge vitrified floor tiles in different size (thickness to be specified by the manufacturer with water absorption. less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/Sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and R inner frame fixed with lugs with 20mm long 6.3mm G.1 counter sunk RATE machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction

Providing primer one coats of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Toughened glass 12mm thickness

1.8 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable etc. as required. Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLSPVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Supplying and fixing metal box of following sizes (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 mm X 75 mm X 60 mm deep

100 mm X 100 mm X 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable as per

2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable as per

4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable as per

LED Tubelight fitting (i/C Batten) (10/12 W) IEC:62722

LED Tubelight fitting (i/C Batten) (20/22 W) IEC:62722

15/16 watt LED bulb IEC:62722

9"(230mm) metal exaust fan

Ceiling Fan 48" (1200mm) IS:374:2019

HYDT : Cost of drilling 200mmX165mmX300 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. (a) 0.00m Up to 50.00m depth below G.L. In Rural Areas (DWSD 119)

(b) Above 50.00 m depth. In Rural Areas

Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. (DWSD Item 120)

Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. (DWSD Item 120 B)

Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly- propylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.with safty wire (Make KSB/Crompton) (DWSD (Sl 139-M1055) Submersible Pump set 100 mm dia. (with Polypropyline/ noryl impellor.) up to 20 stage. 1.50 HP-

D.O.L. Starter with SS Enclosure with 380/415 Volt coil

Supplying , Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed as per IS : 7098 3Core 4.00 sq mm

Providing safety wire of 5 mm dia PVC coated

Supplying & Fitting M.S. Clamp

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal dia Pipes

Carriage of Materials :- Cement

Steel

chips

Brick

Labour Cess @ 1%

Please Enable Macros to View BoQ information