Proposed Construction of Various works of Co-operative Training Centre, Foodi, Khunti

Jharkhand State Building Construction Corporation Limited (Govt. of Jharkhand Undertaking) Corporation Identification No.-U45201JH2015SGC003325 Regd. Office: - Building Construction Department, Govt. of Jharkhand, Project Building, P.O. - Dhurwa, Ranchi-834004, Jharkhand Phone No.:- 0651-2446257/2446258/2446259, e-mail:[email protected] VERY SHORT TERM E-QUOTATION INVITATION NOTICE FOR DETERMINATION OF RATE

BILL OF QUANTITIES FOR THE PROPOSED CONSTRUCTION OF VARIOUS WORKS OF CO-OPERATIVE TRAINING CENTRE, FUDDI, KHUNTI.

Name of Agency Supplier/ Contractor

Sl No IT.NO. ITEM OF WORK UNIT RATE AUDIT S TNK

PAT B - NON SCHEDULED ITEMS

1 Suplying, installaing and commissioning of small size water fountain as approved by the authorities, with solar operated motor of required HP and water proof light fittings of approved brand (all the items will be got approved from the Client and Engineer incharnge before installation) all cost complete including required electrification work etc. all complete as per direction of E/I. 1 job

Supply/erection/commissioning/construction of Statue of Birsa Munda 6'-4" with required artificial work etc. all complete 1 job

Supply, installation and commissioning of Water fountain with the following specifications. 1 job

. Diameter of Ring – A (Outer): 10 ft Make: G.I, Dia: 40 mm 1 no., II. Crown Nozzles: MAKE: SANSAR, BODY : BRASS HEIGHT: 50mm, TOP 4-5MM, BASE: 10 MM - 55 nos, III. CENTER FOAM SHOOTER: • Make: Sansar, Body: Brass, Height: 160 mm, Top: 60 mm • Base: 40 mm - 1no., IV. SUBMERSIBLE MOTOR: 5 H.P MOTORS MAKE: CROMPTON/KIRLOSKAR V. SUBMERSIBLE LIGHTS: (12W) LED WITH RGB- COLOR OPTIONS . MAKE: SANSAR, COLOR OPTIONS: RGB - 12 nos. VI. RGB - 1 no., CONTROLLER - 1 no., VII. PROVIDING NECESSARY PLUMBING WORK SUCH AS G.I. PIPING,G.I. FITTING, VALVES I.E COMPLETE IN ALL RESPECT- VIII. ELECTRICAL PANEL WITH MCB, AMMETER, VOLTMETER, SINGLE PHASING PREVENTER INDICATING LIGHT, STARTER ETC. IX. ELECTRICAL WORK SUCH AS CABLING, CONDUCTING ETC. X. TESTING AND COMMISSIONING XI. DESIGNING OF CONCEPT XII. LAYOUT PLAN AND CIVIL WORKS OF FOUNTAINS OF 15 FT OUTER DIAMETER, WITH INSIDE DEPTH 1.5’ , SUMP FOR PUMPS, CERAMIC TILES, STANDARD QUALITY IN INNER WALLS AND OUTER WALLS OF FOUNTAINS

Rate as per running project S/F/F all height wall paneling/paartition of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including beading, all taxes and royalty all complete as per building specification and direction E/I SQM

N.S. Rate as per existing work Providing and fixing high quality Vertical blinds of Vista or equivalent of approved colour and make with necessary fittings all cost complete, as per direction of E/I. SQM

Audi 19 Auditorium Chair, Push back, PU foam, PU Arm, Fire Retardant Fabric Tapestry, 550(L)X770(D)X1060(H), individual Arm (make Geeken or equivalent) EACH

AURA 3 Three Seater Sofa, Wooden Frame, SS pipe Leg, size in mm 2120(L) X 935(D)X850(H), Leatherettee, all cost complete (Make Geeken or equivalent) EACH

GP-164 Visitor chair/Stage chair, Chrome Cushion arm, Chrome plated pipe stand Leatherette, all cost complete (Make Geeken or equivalent) EACH

ORBIT Centre table, SS pipe frame Chrome Finish, PLPB edge vabded top 18mm thick Marino 10858 Colour, 1200X600 all complete (Make Geeken or equivalent) EACH

Air conditioning work

Supply of full inverter VRF system( 5th Generation) full inverter VRF with modular type outdoor units all scroll DC inverterter compressors for cooling application along with different typs of indoor units, compatible ODU's. All the inverter type scroll units shall be with corrossion resistant black fin on condenser Al fins so as to shield it from sand salt and other elements carried by air along with hydraulic coating for longer life. COP at AHRI condition of ODU at 100% load should not be less than 3.7 ( COP declaration at AHRI condition to be submitted along with tender). Manufacturer of VRF unit should be OEM of its compressor also. Outdoor Unit should be disign to work up tp 50 *C AmbiENT Temp withour tripping.

The VRF unit shall be compatible with 410a or similar eco friendly refrigerant. The ODU should have a sub coil feature to use coil surface more efficiently through proper circuit / bridge. so that it prevents flushing of refrigerant from long pipe due to this effect , thereby achieving energy saving. ODU should not be derated for ambiient temperature up to 39 Deg C. Vendor to submit cooling capacity of ODU at 35 Deg C and 39 Deg C. Even in the event of failure of a few IDU's other IDU's connected on the same ODU shall continue to work continuously. Copper tube of condenser shall be inner highly grooved typeswith fins coated with a factory applied corrossion resistant material and additional hydaraulic coating. Top Discharge Outdoor 20 HP EACH

Suupply installation testing and commissioning of following capacity and external stati cpressureVRF/VRVceiling mountedductabletype indoorunit equipped with washable type filter, fan section with low noise fan / dynamicallybalancedblowermultispeedmotorsectionwithDXcoil ,electronic expansionvalve , cordedremotecontrol, outer cabinet , vibration isolators, drainpanandothernecessarysupportsetc. suitable foroperationonsingle phase 230 V +/- 10%, 50 Hz Ac supply complete as required

Indoor Ductable Unit with BLDC Motor 8.0 TR EACH

Connector - Supply of VRF Y-joint Out door EACH

Controller Indivisuale Supply of Hand wired Remote EACH

Charges for Lifting, Shifting , installation , testing and commissioning of the bove VRF system

Top Discharge Outdoor 20 HP EACH

Charges for Lifting, Shifting , installation , testing and commissioning of Ductable Indoor Units- 8.0TR EACH

Supply Instaation Testing and commissioning including vacumization and Nitrogen testing of following nominal size of soft/ hard drawn copper refrigerant piping for VRF /VRVsystem complete with fitting swith suitable adjustable ringtypehanger supports, jointing/brazing includingaccessories insulatedwith XLPE Class O tubular-insulation/ with class O closed cell elastomatic nitrile rubber tubular sleeves sections of specified thickness as given below fo rsuction andliquidlines,all accessories as per specification setc as required

28.58mmOD ( Hard drawn)With tube thickness 1.2mm, 19mmthick insulation RMT

15.86mmOD ( Soft drawn)With tube thickness 1.2mm, 19mmthick. Insulation) RMT

Tray Work for Copper Piping Supplying and installing following size of Hot Dipped Galvanized perforated GI cable trays including bends. tee, reducers etc with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with GI suspenders including bolts & nuts, suspenders etc as required. 250 mm wide x 40 mm depth x 1.6 mm thickness RMT

Drain work- Supply laying/ fixing testing of following nominal sizes of PVC Drain water piping duly insulated with following closed cell nitrile rubber of minimum 19kg/ cu m density.- 25 mm dia RMT

DUCTING & GRILLS

Supply, Fabricated, installation, balancing and commissioning of GI Duct SQM

Supply, Installation of Grilles and VCD SQM

Duct Accoustic - Supply and fixing of acoustic lining or Nitrile rubber of supplyair duct and plenum with 25mm thick having density of 32kg/m³,with 25mm X 25mmGI section of 1.25mm thick,at 600mm centre to centre covered with Reinforced Plastic tissue paper and 0.5mm thick perforated aluminum sheet fixed to inside surfaceof ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications SQM

Additonal Refregerent 410a Kg

Transmission & Control Wiring For VRV System- Providing & fixing of control cumtrans-mission wiring of copper between indoor and out door unit in 25 mm PVC Conduit.- 3C / 2C x 1.0 Sq mm RMT

Supply and installation of Sound system and Digital podium

SITC Of 300-watt, 8-ohm small-format speaker for zone-fill coverage and high-SPL foreground music 2 LFS high excursion 8-inch woofers support the lowest vocal range down to 70Hz EMB2S extended HF compression driver is also used in Bose’s ArenaMatch arrays 90° x 60° constant-directivity high-frequency horn yields wide, even coverage in either horizontal or vertical orientations Power Configuration: 2-way LF Driver Size: 2 x 8" LF8 woofer HF Driver Size: Bose EMB2S titanium-diaphragm, neodymium compression driver Power Rating: 300W Continuous, 1200W Peak Impedance: 8 ohms Frequency Range: 70Hz-18kHz (-10 dB) Crossover Frequency: 200Hz, 1.2kHz Maximum Peak SPL: 126dB SPL Height: 9.3" Width: 27" Depth: 11" (model AMU 208, BOSE or equvalent) EACH

SITC Of Power ShareX PSX4804D is a four-channel, 4800-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via Control Space Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.Total Power Output 4800 W (Rated total @ 4-8Ω, 70V, 100V), Amplifier Class Class D Frequency Response 20 Hz – 20 kHz (±1.0 dB @ 1 W, 8 Ω) Connectivity Dante (RJ-45), Analog balanced inputs (Euroblock),Dimensions (H x W x D) (1.8 in x 19.0 in x 14.1 in) (PSX4804D, BOSE or equivalent) EACH

SITC Of A powered, portable bass module, the Sub2 subwoofer combines with virtually any portable PA and delivers low end performance down to 37 Hz. Its unique 10” × 18” high-excursion neodymium RaceTrack driver allows for an ultra slim enclosure, delivering performance that rivals traditional round drivers without the cumbersome size, freeing up room in your vehicle and on the stage.Wattage- 1000 W,Product Dimensions (H × W × D) (27.3 × 12.5 × 21.7 in) (SUB2 Bose or equivalent) EACH

SITC Of OFC Speaker Wire RMT.

SITC Of 20 Channel mixer EACH

Connector & Other Accessories 1 set

Volume controller (CC1 Bose or equivalent) EACH

SITC Of 4K UHD Short Throw Home Cinema Laser Projector Color Black Brightness 2600 Lumens Resolution 4K UHD (3840 x 2160)Light Source Laser Contrast Ratio 3,000,000:1 Throw Ratio Short Throw HDR Support HDR10 / HLG Input Connections 2 x HDMI 2.0b, 1 x USB-A, Audio Out, RS232, LAN Built-in Speaker Yes Keystone Correction Yes (Vertical & Horizontal) Dimensions (H x W x D) 166.5 x 416 x 351 mm (Benq or equivalent) EACH

SITC OF SCREEN, PROJECTION; TYPE: DISPLAY; OPERATED: MOTORISED, MOUNTING METHOD: WALL, MATERIAL: HD MATT WHITE FIBER, COLOR: WHITE, PROTECTION FOR WHICH DESIGNED: PROJECTOR, FOLDABILITY: INFLATEBLE, VIEWING AREA-: 90"X160"; ASPECT RATION 16:9, RESOLUTION: 1080 P,DIGONAL 185" (SUVIRA or equivalent) EACH

SITC OF Wireless Handheld Microphone SVX Diversity Receiver. Handheld Microphone Transmitter with Microphone. Frequency Response 60 Hz - 15 KHz. Customized frequency response is smooth and extended. It is specifically tuned for audio use. Cardioid detection pattern rejects off-axis sounds and provides good front feedback. The dynamic cartridge has a simple, solid coil so it can handle high sound levels without any distraction. The steel tennis ball has a "pop" filter grille to reduce breathing noise and wind noise. EACH

SITC of Low Noise Motorized projector ceiling lift (Suvora/Liberty) EACH

SITC OF digital Podium Body and Top : Metallic All doors Lockable : Yes Top Sliding Mechanism : Yes Provision for Monitor : Yes Electronic Monitor Lift : Yes Document Camera Tray : Yes (Sliding Type) Door access : Front/Rear Chassis : Polymer coated CRCA steel sheet Thickness of enclosure : 1.6mm Screen Size : 21.5” Diagonal Resolution : 1920 x 1080 PC Connection : USB Port Brightness : 250 cd/m2 Input : DVI, HDMI Touch : Finger and Stylus with capacitive Touch Stylus Type : Battery Free Pen Display Colors : 16.7M Response Time : 5ms Contrast Ratio : 1000/1 Cartridge : 20mm Condenser Frequency Response : 40~20000 Hz. Polar Pattern and Microphone Type : Cardioids, Polarized Condenser Connectors : 3-Pin XLR with 48V Phantom Power and 200 Ohms impedance. (Delta Plus - Peoplelink) EACH

Stage treatment and lighting

CE Certified 54 x 3W LED RGBW PAR Light with RDM protocol and die cast aluminium body duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 3V DC SMD LED ARRAY • Base color : RGBW • LED Configuration : 12Red, 18Green, 18Blue, 6White Optical System • Light Beam Angle : 15° or 25° • Panel lens: PMMA LENS ARRAY combined with a special optical design produces uniform and pleasant lighting even when used with a mixture of different LEDs • Power Supply Unit, Input: AC 100 - 260V 50/60Hz Output: 24V DC, electronic flicker-free power supply. • Lighting Fixture must be provided with Minimum 3 Mtr Length (2.5 Mtr Length Power In Cable + 0.5 Mtr Power out Cable) 3 core 1.0Sq mm FRLS & ISI mark cable with 3pin IEC Male Plug Mandatory. • Lighting fixture must be properly earthed and earthling cable should be connected with power supply chord. Control System • Control Protocol : RDM & Manual • Mandatory Accessories supplied along with Lighting Fixtures 1) Spud 28 mm Spigot with M12 thread •Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning EACH

SITC of CE Certified 100W LED Spun Aluminium PARCAN Light 3200K with RDM protocol and duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 36V DC COB LED Max Power Consumption upto 100W • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95 • Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : Min 10° to 30° or more manually adjustable zooming • Lens: Lense Dia 150mm ± 5% . • Lens Material: Poly methyl methacrylate without bubbles and crack to provide pleasant light output.. Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz Output : 36V DC power supply. • Power Consumption : 100W ± 15% • Dimming : 0 to 100% 8 Bit Linear Dimming • Lighting Fixture must be provided with Minimum 3 Mtr Length (2.5 Mtr Length Power In Cable + 0.5 Mtr Power out Cable) 3 core 1.0Sq mm FRLS & ISI mark cable with 3pin IEC Male Plug Mandatory. • RDM ID Information: RDM ID Can able to show minimum following Information like * • Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning • Focus type : Smooth focus adjustment from rear with thermoplastic Knob • Focusing Mechanism : Manual Focusing mechanism forsmooth zooming. EACH

200W LED Fresnel spot Light 3200K with RDM protocol and Extruded aluminium body duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 54V DC COB LED Max Power Consumption upto 200W • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95 • Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : Min 10° to 50° or more manually adjustable step less linear zooming • Fresnel lens: Lense Dia 200mm ± 5% to provide adjustable cone of light that has a soft edge, easily blended with adjacent beams to provide even illumination. • Lens Material: Annealed Fresnel lense made up of high quality, shock resistant borosilicate glass with brand name embossed on the Lense but without bubbles and crack to provide uniform light output. Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz Output : 54V DC power supply. • Driver is comply with IEC/EN 61347-2-13 for safety standard, OEM must be provide test certificate • Power Consumption : 200W ± 15% • Secondary Safety glass fuse of 3 Amps with easy replacement position. • Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning • Focus type : Smooth focus adjustment from rear with thermoplastic Knob • Focusing Mechanism : Focusing mechanism of lights should be SS/Brass lead screw type for step less smooth zooming. EACH

400W LED BLINDER Light 3200K with RDM protocol and MS / Aluminium sheet duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 36V DC COB LED Max Power Consumption upto 100W / Piece • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95• Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : 30° • Panel lens: PMMA LENS ARRAY combined with a special optical design produces uniform and pleasant lighting even when used with a mixture of different LEDs • Lens Material: Poly methyl methacrylate without bubbles and crack to provide pleasant light output. Electrical System• Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning EACH

150W LED HYBRID MOVING Light with RDM protocol and Hi grade plastic body black color - Light Source • LED Lamp: COB LED Max Power Consumption upto 150W • Base Color : Cool White Optical System • Beam Angle: 3°-7° or More • Zoom Angle: 7°-21° or More • PC lens: Lense Dia 100mm ± 10% • Lens Material: Shock resistant borosilicate glass Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz • Power Consumption : 200W ± 15% • Lighting Fixture must be provided with Minimum 3 Mtr Length 3 core 1.0Sq mm FRLS cable with 3pin IEC Male Plug. • Lighting fixture must be properly earthed and earthling cable should be connected with power supply chord. Control System • Control Protocol : RDM & Manual • Easy setup: locally and remotely by RDM protocol - integrated display • LED Lights must be CE certified to ensure required quality & reliability of the products. Copy of CE Certificates must be submitted along with offer. Mechanical System • Pan & Tilt Angle :540° & 240° 16bit electronic movement. • Zoom : Stepless Smooth electronic Zoom • Weight : 9 Kg ~ 12 Kg EACH

Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish - Lock - MS threaded Galvanized lockkey, Plastic Glass filled nylon moulded M6 key. Receptacle - 28mm standard TV spigot. Safety - MS Galvanized chain with pin. Finish - Pretreated and black epoxy polyester powder coated. Self-weight - 0.54Kg Safe working load – 150Kg.

Safety bond with lock clip -Safety bond with lock clip to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 100Kgs. EACH

79mm Round Identification name plate dulyepoxy polyester powder coated in matt texture finish -Identification name plate round 79MM undergone through 7 Tank chemical treatment to keep them rust free and duly powder coated in matt White texture finish. EACH

Fixed Stage lightbar 9 Mtrs Length made of dual barren 40NB pipe with black epoxy polyester powder coated - Dual barrel Light bar equipped with 40x75x40 Cable trunking with lid for better aesthetic look and for cable safety. Dual barrel pipe construction welded with 75x6mm MS Flat in every 2Mtrs for better strength EACH

Fixed FOH lightbar 12 Mtrs Length made of dual barren 40NB pipe with black epoxy polyester powder coated - Dual barrel Light bar equipped with 40x75x40 Cable trunking with lid for better aesthetic look and for cable safety. Dual barrel pipe construction welded with 75x6mm MS Flat inevery 2Mtrs for better strength EACH

Main Valance bar arrangement 12 Mtr Length made up of 40NB MS Pipe with required suspenders duly black epoxy polyester powder coated - Made using 40 NB, 48MM OD, 2mm thickness MS Pipe or higher size • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size • Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with 40 NB pipe coupler clamp ifrequired.• All thematerials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyesterpowder coated in black matt texture finish. EACH

MS Fabricated 4 way IEC Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures - MS Power junction box made up of 22SWG CRCAsheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt blacktexture finish CE approved 4 way 10A IEC Socket Fixing : Snap fit /15 (1.5mm), Total Max Rating : 10A, 250V a.c, Operating Temp : –20˚C to +70˚C,Moldings : Nylon, Flammability Rating UL94V-0 CE certified FC/PG 11 cable entry gland, Junction Box must be compact of Size : 140 x 112 x 50mm orless Pipe clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing EACH

MS Power junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, dulyepoxy polyester powder coated with Matt black texture finish CE approved 2 way 10A IEC Socket SPST 4 Pins Toggle Button Rocker switch Fixing : Snap fit /15 (1.5mm), Total Max Rating : 10A, 250V a.c, Operating Temp : –20˚C to +70˚C, Moldings : Nylon, Flammability Rating UL94V-0 CE certified FC/PG 11 cable entry gland, Junction Box must be compact of Size : 140 x 112 x 50mm or less Pipe clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing EACH

MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female plug made up of 22SWG CRCA, black epoxy polyester powder coated -MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free,duly epoxy polyester powder coated with Matt black texture finish. 5 pin XLR DMX OUT (Female plug) of reputed make connector, Extra high temperature resistant insulator material, All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin1 to chassis ground. CE certified FC/PG 7 cable entry gland, Junction Box must be compact of 125 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul plug arrangement for wall/floor fixing EACH

MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX male plug made up of 22SWG CRCA, black epoxy polyester powder coated - MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. 5 pin XLR DMX IN (Male plug) of reputed make connector, Extra high temperature resistant insulator material,All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin 1 to chassis ground. CE certified FC/PG 7 cable entry gland, Junction Box must be compact of 125 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul EACH

MS Fabricated 5 pin DMX Signal Loop Junction box fitted with 5 pin DMX male & female plug with 0.3 Mtrs FR DMX Cable with cable mout plug made up of 22SWG CRCA, black epoxy polyester powder coated - MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish.1 Nos each of 5 pin XLR DMX IN (Male plug)&5 pin XLR DMX IN (Male plug) of reputed make connector, 0.3 Mtr Length Dmx Cable with Cable mouth 5 Pin XLR Male &Female loop Cable. Extra high temperature resistant insulator material, All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin 1 to chassis ground. CE certified 2 Nos of FC/PG 7 cable entry gland, Junction Box must be compact of 140 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul plug arrangement for wall/floor fixing EACH

MS Fabricated Auxilliary marshalling box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated - MS fabricated Auxiliary marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. CE certified FC/PG 7 & 11 cable entry gland required Nos as per cable entry. MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors. Box door must be made with Hingeable door with screw lock. Pipe clamp arrangement for fixing EACH

MS Fabricated Motor Cable Termintion box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated - MS fabricated Motor Cable Terminationboxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. CE certified FC/PG 11&13.5 cable entry gland required Nos as per cable entry. MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)Box door must be made with Hingeable door with screw lock. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing EACH

MS Perforated 75mm Wide Cable Tray with Lid, black epoxy polyester powder coated - MS perforated trays with press fit type tray lid Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement. EACH

bare copper for internal earthing system - Internal earthing copper bare conductor of size 10 SWG forpower network related to work coming under our scope. EACH

Installation hardwares required for the successful execution of work - Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. EACH

MS Fabricated Direct Lighting distribution Panel fitted with 32A TPN Incomer and 12 Way SP MCB Panel duly epoxy polyester powder coated - Main Incomer 32A TPN. TPN Make: L&T, ABB, Siemens Out Going10A SP MCB’s for Lighting Junction Box Out Going 6A SP MCB’s for Splitter & Console R, Y, B Indicator lamp, CE certified Nylon FC/PG 11 7 & 21 glands for outgoingcables as per requirements 11/8" or Higher size Brass gland for incoming cable MS MCB channel required length for fixingof MCB’s All the MCB's identified by a Name plate with suitable code/Number, All the cables inside the panel routed through gray color cable trough. All the cables used inside the panel should be FRLS PVC Insulated copper multistrand flexible and must have ISI Marking. All the outgoing cables terminated through Grey terminal connector with each line having P, N, E Indication. Panel Including wiring and bus bar connection with proper earthing. Panel with Hingeable door with key door lock complete. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing EACH

SITC of Certified RDM Enabled 1 universe 256 channel, 24 Fixture Control DMX Lighting Console for RDM/DMX network with LCD screen for easy navigation - 256 or 512 or 1024Channels 24 individual fixture control 3 or more encoder wheels LCD Display Support RDM &Art net EACH

SITC of MS Fabricated Combined 1 Way Motor Control Center Panel with Remote control panel for light bars duly epoxy polyester powder coated - 16A TP or TPN Incomer. TP/TPN R, Y, B Indicator Lamp Volt Meter to read the incoming voltage of each phase. Main Contactor of 9A 240V 4 pole contactor with 04 -06A Over Load relay for safety 24V 4 pole Low Voltage Contactors for each motor outgoing 24V 4 pole Low Voltage Master Up & Down Contactors 240V / 24 V Step-down transformer for Low voltage Contactors Terminal Fuse connectors for each output as additional safety. CE certified Nylon FC/PG 13.5 glands for outgoing cables as per requirements 7/8" or Higher size Brass gland for incoming cable connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection) Panel Including wiringwith proper earthing. Panel with Hingeable door with 2 Nos key door lock complete. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing EACH

SITC of RDM Compatible DMX Splitter with 1 DMX in and optically isolated 8 DMX out port for DMX network - Splitter enclosure made up of MS 18/16 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Control Protocol RDM and DMX 512 2 DMX input 5 pin XLR Connectors 8 optically isolated DMX output 5 pin XLR Connectors IEC male plug to power supply the splitter LCD Display in the front to check the signal flow 4 Nos of high precision tactile switch for mode selection. Splitter bracket for mounting or 19” rack mount EACH

Various Cables & Connectords as per site requirement EACH

Fire fighting equipments

Supply installation testing and commissioning of ISI marked ABC 6 kg Capacity with ISI Certificate. Each

Supply installation testing and commissioning of CO2 4.5 Kg capacities. The extinguisher shall confirm to IS 2878 and have Certification mark and with Certificate. Each