PROVISION OF DEFICIENT MARRIED ACCOMMODATION FOR COAST GUARD EPS AND CIVILIANS AT CG AIR STN RATNAGIRI

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (SOLAR WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (FIRE FIGHTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (COMPOUND WALL , FENCING AND GATE ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (OBSTRUCTION LIGHT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XV (DG SET) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XVI (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY Supply & fixing wall mixer Jaguar make ( CQT-CHR-23273G) or equivalent in list of Approved make attached with provision for over head shower with 115 mm long bend pipe on upper side, connecting legs, wall flenges & flow ristrictor of 2.5 LPM at 3 bar pressure complete all as specified

Supply & fixing Over head shower 100 MM DIA Jaguar make ( OHS-CHR-1989GA) or equivalent in list of Approved make attached single flow ( ABS body chrome plated with grey face plate) with rubit cleaning system and flow restrictor 6.0 LPM at 3 bar pressure and with Shower arm (SHA-CHR-477P) with wall flenge complete all as specified.

Supply & Fixing water meter in PP-R pipe line (cost of male sockets included). In 40 mm pipe

Supply & fixing 20 mm dia regular body concealed stop cock Jaguar make (ALD-CHR-089CQT) or equevlent of Parryware or Hindware Exposed part kit Jaguar make ( CQT-CHR-23083K) or equevlent of concealed stop cock with fitting sleeve etc complete screwed both ends for pipe or for unions and fixed suitable for 20 mm bore of pipe , complete all as specified.

Supply & fixing 20 mm dia Jaguar make Angular stop cock ( CQT-CHR-23053) or equivalent in list of Approved make attached complete all as specified.

Supply & fixing 20 mm dia Jaguar make 2 way bib cock ( CQT-CHR-23041GD) or equivalent in list of Approved make attached with flow restrictor 3.8 LPM at 3 bar prssure complete all as specified.

Supply & fixing Jaguar make ACN-1153N Toilet Roll Holder with Flap) or equivalent in list of Approved make attachedcomplete all as specified.

Supply & fixing 20 mm dia regular body Sink cock Jaguar make (CQT-CHR-23347GE) or equivalent in list of Approved make attached swinging casted round shape spout ( wall mounted model) & flow restrictor of 1.3 LPM at 3 bar pressure, complete all as specified.

Supply & fixing of pvc flexible pipe connections complete all as specified.

Supply & fixing Jaguar make health faucet ( ALD-CHR-583GA) or equivalent in list of Approved make attached (ABS Body) with 1 Meter Long PVC Tube & Wall Hook) & Flow resrictor 6.0 LPM at 3 bars pressure or equevlent complete all as specified.

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884-1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent in list of Approved make attached

S & F modular type 1 moduie TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent in list of Approved make attached

S & F modular type 1 module telephone socket complete all as specified and directed. Make: Legrand Arteor Cart-Part No. 5734 26 or equivalent in list of Approved make attached

Blanking (1module) Make: Legrand Arteor Cat-Part No. 5734 49 or equivalent in list of Approved make attached

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficiency of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 10%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50-60Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat-Part No. 112785 BCLAB 20W or equivalent in list of Approved make attached

S & F 10 W surface/wall mo.unted LED batten having high efficiency long life LED chips with luminous efficiency of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 10%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13}: 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat-Part-No. 112407 BCLSB 10 WH or equivalent in list of Approved make attached

S & F 20 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of100 lumentW, integral SMPS based constant•current electronic LED driver with THD< 10%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 65 protec ion, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm 00 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade Gl pipe, including Gl clamps, nuts, bolts & washers with two coats of synthetic enema! paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BCLST 20W LED I or equivalent in list of Approved make attached

S & F BEE five star rated BLDC ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CPM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size arid electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Havens Cat- Part No. ES-50 or equivalent in list of Approved make attached

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size fro[l1 ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No.VENTILUS 10" or equivalent in list of Approved make attached

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No.TRANS AIR 12" or equivalent in list of Approved make attached

S & F engery efficient metalic exhaust fan having blade sweep 380 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No.EXHD380-6-l 15" or equivalent in list of Approved make attached

Supply & erection of 4 way, TPN (Vertical DB with MCCB provision as incomer and provision for 3 Nos. MCB TP and 2Nos. MCB SP as outgoings). Legrand make Cat No. 5077 46 or equivalent in list of Approved make attached [Cost of MCCB and MCBs not included in this item and are taken separately].

S & F lSI marked MCB for AC applications till 63 A, having breaking capacity lcn= 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed. (a) (a) 6A, SP MCB, C- curve

(b) 16A, SP MCB, C- curve

( c) 20A, SP MCB, C- curve

(d) 32A, TP MCB, C- curve

(e) 32A, FP MCB, C- curve

Wiring with twin core PVC insulated sheathed cable with copper conductor having single strand of 0.5 mm dia taped for telephone wiring from terminal box to telephone socket complete all as specified Conduit and conduit accessories shall be measured and paid separately.

Wiring with TV coaxial RG -6 heavy duty PVC insulated sheathed cable with copper conductor having single stand of 0.7mm dia and a copper wire net for TV antenna from terminal boxes to TV socket complete all as specified (conduit pipe and fittings shall be measured and paid separately).

Supply, installation, testing and commissioning of CI 1.0 accuracy, Tamper proof high durability, sleek LCD display energy meters having current range 10-60A capable of measuring KWh parameters complete all as specified and directed. (a) 1 Phase energy meter (10 -60Amp) Make: L&T Cat pert No. WM101BC7DDH or equivalent in list of Approved make attached

(b) 3 Phase energy meter (10 -60Amp) Make: L&T Cat pert No. WM301BC7D10 or equivalent in list of Approved make attached

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in conveinient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 100mm widthx50mm depth x 1.6mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 100mm widthx50mm depth x 1.6mm thickness

Supplying and fixing LED signage light 3W with battery backup 02 Hours

Supplying and fixing energy effiecient LED ' T ' bulb with base B22 and light source 10watt colour temperature 6500K

EXTERNAL WATER SUPPLY Material & labour for cutting of existing CI/DI spigot and socketted pipes and fittings conforming to IS-12820-1989/ IS 5382-1985 for 150mm to 300mm bore with suitable size T joint for taking branch connection including all necessary fittings complete all as specifed and directed.

Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 200 mm dia ISI all as spd and directed.

Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 150 mm dia ISI all as spd and directed.

Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 100mm dia ISI all as spd and directed.

Supply & fix sluice valve 150 mm bore, flanged of class 1.0 PN complete all as specified and directed with necessary fittings etc

Supply & fix sluice valve 100 mm bore, flanged of class 1.0 PN complete all as specified and directed with necessary fittings etc

Supply & fix sluice valve 80 mm bore, flanged of class 1.0 PN complete all as specified and directed with necessary fittings etc

Supply & fix cast iron air release valves with single air out let confirming to is 14845 of size 150 mm bore pipe and fixed up in cast ron water supply main of size 150 mm dia complete all as specified and directed.

Material & labour for cast iron NRVwith single air outlets, conforming to IS 14845 of size 150 mm dia complete all as specified and directed with necessary fittings etc. complete all as specifed and directed.

M&L for construction of stone masonry valve pit size of 90x90x90cm (internal dimension complete with 40x40 x6 mm MS angle iron frame 3mm thick Ms Top cover with locking arrangementincluding two coat of black itumionous paint over a coat of red oxide primer on steel surface all as specified and directed.

M&L for construction of stone masonry valve pit size of 60x60x60cm (internal dimension complete with 30x40 x6 mm MS angle iron frame 3mm thick Ms Top cover with locking arrangementincluding two coats of black bitumionous paint over a coat of red oxide primer on steel surface all as specified and directed.

Supply and fixing of bulk water meter CI body suitable for 100mm dia pipe line complete all as specifed and directed.

Supply install test and commissioning of pump set centrifugal monoblock of cap 12 WHP electrical driven 3 phase 415 V 50Hz suiatable for 1400 LPM at 40 mtr head connecting with starter pannel (measured seperately) having suiatable type automatic starter indivisual control MCB's and main control MCCB digital type voltage and digital type Amp metre indicator lamp with neccesary suction side GI pipe medium grade , GM foot valve & PCC foundation complete alongwith iron pipe and fixing arrangment etc, all as secified and directed.

Supply install test and commissioning micro processor based constant curent technoloy water disenfection equepment using silver ionistion process baseed on oligodynamic technology, suiatale to provide directly to pumping main or to sump or to over head tank, The water chamber is to be made of corrosion free stain pipes and investment casting fittings confirming to SS 304 capable to withstand a pressure of 10 LSC and with built in silver electrodes made of pure silver after proper metallurgical treatment and chemical treatment for dissipating of minute ionic silver disienfectent. Suitable for dual ionization plant of 0.25 lakh liters/ hour capacity. This silver electrode must also be nontoxic to humans. All this will be mounted in powder coated mild steel cabinet of 1.6 mm thick with universal lock and key for safety. The control panel with electrode ok indication to show that electrode is working clearelectrode indicate to show that the electrodeclogged is and changed electrode indication to show that the electrode is nearing completion for easy maintenance of the equipment. The disinfectant produced by the electrode is totally non toxic at the closed level as prescribed by W.H.O. standards. Theequipment’s is suitable to operate on single phase 220Volts,50Hz power supply. The life of electrode shall be 900 Millionliters with the dosage of 0.01 PPM of silver. Make: M/S Bharti water Pvt. Ltd model No BW/ECO 25 or approved model of make in M/S Jyoti waters India (Pvt.) Ltd M/S Pious water Pvt. Ltd. or Equivalent.

Supply and installation & testing of maintenance free chemical earthing of dual pipe technology of 3 mm long with outer pipe diameter of 88 mm & inner pipe diameter 48 mm the pipes are properly galvanized for 80-120 micron and wall thickness of inner pipe 3mm&2mm of outer pipe. There should be terminal for connection of 75x6 mm with two holes of 14 mm diameter dully fitted with the highly conductive material with sealing at both ends with lead terminalof 75x6 mmat top. Alongwith 2 bags of 25 kgs each of earth enhancing compound should be between 7 to 8. The content of mercury (Hg)&Hexacromium should be below detection level. The electrode should be tested for salt spray test as per BIS117-09 for corrosion for minimum 500 Hrs. The ELECTRODE shall be dully tested & certified by CPRI (Central Power Research Insititute). Govt of india for a minimum short circuit current of 42K Arms for 1 second with initial pick of 88.2 KA including necessary earth work, refilling etc complete,

Supply and fixing SMC box size 200x140x95 mm internal size with hinged door (L) with 1 no PVC connector 4 way 16 Amps and 1 no MCB SP 6 Amps including fitting complete as directed and specified

Supply and fix LED street light 45watts made up of Pressure die cast Alluminium housing, toughened glass diffuser IP 65/66 protection and impact resistance of IK07 , Hi-power LED light source and lense embedded PC cover including wired with accessories complete all as specified. Make: Havells Cat Part No. ENDURA PEARL NEO SL45W757PASYTOPC or equivalent in list of Approved make attached

HOT WATER Appliances . Supply, installation & testing Solar Water heating system of capacity 1000LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of 55-26 SWG brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capable to supply hot water at 60° C and with electrical heating backup. all as specified and directed

Supply, installation & testing Solar Water heating system of capacity 500LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of 55-26 SWG brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capable to supply hot water at 60° C and with electrical heating backup. all as specified and directed

Supply, installation & testing Solar Water heating system of capacity 300 LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of 55-26 SWG brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capable to supply hot water at 60° C and with electrical heating backup. all as specified and directed

Supply, installation & testing Solar Water heating system of capacity 200LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of 55-26 SWG brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capable to supply hot water at 60° C and with electrical heating backup. all as specified and directed

Supply, installation & testing , and fixing 300 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete and directed and specified

Supply, installation & testing , and fixing 200 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete and directed and specified

Fire fighting Supply, and fixing 63 mm dia gun metal branch pipe with 12.5 mm nozzle cnfirming to IS 903. complte as specifies and directed.

Supply, and fixing hose reel of 20 mm dia and 30.0 mtr length confirming to IS 5132. complte as specifies and directed.

Supply, and fixing branch pipe with nozzle of 20 mm dia for hose reel confirming to IS 8090. complte as specifies and directed.

Supply, and fixing MS box cabinet ( Approx 750m x 600mm x 450mm ) of coupling to RLL pipe conection fabricated from 16 gauge sheet with full front glass door and locking arrangment painted and mounted on massonary platform comlete as directed and specified.

S&F Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 40m head, 900 LPM discharge and accessories complete.

Supply , installation. commissioning & testing of pressure switch as directed and specified complete.

Active full function repeater panel complies with EN54-2, network up to 64 panel/ repeater , programmable one touch test mode ,power full and versatile cause and effect programming ,cause and effect wizard including cause and effect wizard including cause and effect action disablement configuration ,test mode configuration5.25 amp power supply to EN54 part 4 large graphic display in built built help and alarm information screen ,real time clock , stylish enclosure design soft touch tactile button , 2 programmable function buttons, 3 programmable front panel mounted LEDs, improved front loading printer (optional ) Up to 512 programmable inputs and output per panel via 2 wire RS 485 serial link (Optional ) simple windows graphical configuration and IP 30 protection.

Supply, install, test and and commission of water type fire extinguishers cap 9 Ltr with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as directed and specified

Supply, install, test and and commission of light weight squeeze grip CO2 extinguishers cap 3Kg with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as directed and specified

Supply, install, test and and commission of dry power (ABC) extinguishers cap 9kg. with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as directed and specified

Supply, install, test and and commission of mechanical foam extinguishers cap 9Ltr. with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as directed and specified

Supply, install, test and and commission of Fire bucket (dry sand) cap 9 Ltr with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as directed and specified

Supply, install, test and and commission of 2c x 1.5 Sqmm twisted pair copper cable ISI marked with proper clamping, supports and terminations as directed and specified

OBSTRUCTION LIGHT Supply, and fix aviation obstruction LED type of BAJAJ cat no 110731 BGAV 302 LED, 240V with timer switch of Indoasian cat no SUL 180a and one no 10 A MCB, SPN 230V fixed in hensel encoser all as spd and directed

LIFT Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 07 ( 8 FLOOR) to carry 8 passenger (544 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 08 ( 9 FLOOR) to carry 8 passenger (544 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 09 (10 FLOOR) to carry 8 passenger (544 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 07 (8 FLOOR) to carry 13 passenger (844 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 08 (9 FLOOR) to carry 13 passenger (844 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 09 (10 FLOOR) to carry 13 passenger (844 kg) upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified.

DG SET Supply, Installation, testing and commissioning of silent diesel engine driven generating set,415volt, 3 phase, 4 wire,engine as per is 10002/10001 and alternator as per is 13364 of capacity 200 KVA at 0.8 PF, complete with AMF panel neccesary meter and sound proof canopy and foundation sound proof canopy made of powder coated with specially designed lifting hooks, meet the latest CPCB norms of 75DB at 1 M distance all as spd countinusly rating at PF-0.8 laging 415 volts, AC 3Phase 4 Wire 50Hz +/- 01% supply, 1500 RPM directly coupled with diesel engine water cooled mounted on common base frame complete wih floor mounting free tank(service tank)of adequite capacity with free ine and accesories , PCC fundattion work as per Manufacturer instructions, vibration damper pads, control panle and other accesories etc comrising of following:- Deisel Engine :- water cooled turbo charged with after cooler to diliver suatable BHP at 1500 RPM cinfirming to BS 5514 and confirming to IS 10000 , and oveload capacity of 10% for one hours in an 12 countinous hours of opration with following accesories"- MAke- Kirloskar Modal no HA697TCI G1 or equievlent of Greaves Ltd/Cummins India Ltd) (a) Fly wheel with Stator ring. (b) Lub oil coller. (c) Air Cleaner. (d) Exaust silencer. (e) Fuel filter ( pre and micro) and fuel lift pump. (f) Lub oil filter (g) Automatic blower belt tensioning unit.

(h) fuel pump with machanical governer. ( j) FLy wheel with starter ring. ( k) Battery charing alternator.(l) 12 volts electrical stator motor(m) Exhaust pipe made out of STIC C class MS pipe inclusive of all accessories and hardware necessary suport scaffolding as per manufecturer recommendations to sustain back pressure with rain cap . (n) first fill of oil content and diesal during compmisioning and 12 hrs testing. (o) interconecting copper cabling of adequate capacity between batteries control electronic instrument panel complete with all accesories as per manufactorer specifications display in fllowings:- (i) On/OFF/Start key. ( ii) Battery charging volt meter. (iii) electricle hours meter. (iv) indication and monitoring of colient temprature and safety trip in case of high coolent temp. ( vi) In built engine shutdown system in case of over speed. (vii) indication and monitoring of fuel level alarm system ( p) Battery:- 1x12volts precharged PP battries with lead.

( t) Fuel Tank :- Minimum 8 Hrs fuel load diesel storage capacity fuel tank with mounting bracets, factor made of 14 swg tick MS sheet with level indicator fuel inlet incl, fuel outlet, air vent drain plug,in let arrangment for diesel filling from exerior of conopy ( without opening its pavel) etc completre all as specified. Alternator : Altenator of suatable rated at 0.8 PF 415 V , 3 Phase, 4 wire , 50 cycles/sec. 1500 RMP self exieted and self regulated +01% of ratted voltage from no load to full load. insulator class H& IP-23, The alternator confirm to BS 2113/IS 4722 Make:-Kirloskar. Consteuction of acoustic encloser for said DG set of Cap 200 KVA shall be powder coated and fabricated out of 1.5mm thick MS sheet the sielent conoy shall be of nut bolt type construction conopen pane and door shall have inside lining of fire retardent foam as acoustic material to reduce noice level to 75db measure at 1.0 mt disance for available frequiency as per guidlinen of cenral pulution control board. Civil work :- AFM pannel and all civil work lelated foundation, instalation including base frame as per manufactrur design and be included in item rate.

M & L for earthing complete with galvanized steel earth plate electrode of 60 em x 60 em x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised iron strip 32x6mm as earthing lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick Cl cover, hinged to Cl frame on ground level, Gl watering pipe, funnel, etc. as all specified and directed.

Earthing complete with galvanised steel earth plate electrode 60× 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick Cl cover, hinged to Cl frame on ground level, Gl watering pipe, funnel, etc. as all specified and directed.

Earthing complete with galvanised steel earth plate electrode 60× 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip of 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick Cl cover, hinged to Cl frame on ground level, Gl watering pipe, funnel, etc. as all specified and directed.

Earthing complete with galvanised steel earth plate electrode 60× 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to Copper strip of 20 x 3mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick Cl cover, hinged to Cl frame on ground level, Gl watering pipe, funnel, etc. as all specified and directed. (For lifts)

Supply, installation Organic Waste Converter fulley automatic having capacity of 150Kg/ day having internal tank made from high quality stainless steel while external panels are powder coated for enhanced product life with necessary electric control panel, cabling, necessary civil work for installing machine etc with following requirements (a) Type of Machine: Fully automatic in-vessel compositor (b)Composting method: Micro organism based organic composting (c) Type of microrganism: Heat resistant thermophilic Bacteria (d) Final output: Organic soil additive (e)Cycle time: 24 Hrs (f) Volume reduction in 24hrs : 85 - 90% (g) Internal tank: Stainless steel type (h) Main agitator shaft: Stailess steel type (i) Inpet Voltage: 415V (j) spacial features: VFD as standard across all models, touch screen standards (k) Daily waste processing: 150 Kgs (l) Rated capacity: 7KW (m) Power consumption(KWH per cycle) : 13-15 (n) Length: 1650mm (o) Width: 850mm (p) Height: 1455mm

Supply, install & commissioning of Electrically operated, fully automatic Incinerator having 10kg/hour burning capacity with PLC control panel, 3.00mt high Stainless steel Chimney, with double comburstion chamber, horizontal/ vertical type comprising of primary, secondary chamber, designed on “controlled air” incineration principle and provided with minimum of 115mm thick refrectory and insulation bricks confirming to IS 8-1994 and IS 2042-2006 to sustain minimum temperature of 1000 degree centigrade in primery chamber and 1200 degree centigrade in secondary chamber, exhaust system, high pressure ventury scrubbler, etc, including all other accessories and piping, equipements and civil works required for installation of Incinerator chimney complete all as specified, including following: (a) An emergency stack to vent out the gases in case of power failure. (b) Circulation pump, recirculation tank, inter connection piping, ID fan, instruments, valves, dampers & fittings etc. (c) Electrical control panel with all electrical power, earth & control cabling. (d) Emmission norms has to be met with Central Pollution Control Board

M&L double wall corrugated HDPE pipe dia 300mm laid in trenches including fittings confirming to IS 16098 Part II laid in trenches and jointed as specified and directed

M&L double wall corrugated HDPE pipe dia 200mm laid in trenches including fittings confirming to IS 16098 Part II laid in trenches and jointed as specified and directed

N A Construction Pvt Ltd

NSC Projects Pvt. Ltd.

AKM CONSTRUCTION AND ENGINEERING LLP

JAIN BUILDER

Mukund Enterprises Private Limited

Hariom Projects Pvt Ltd

Beejay Associates Contracts Pvt Ltd