SETTING UP OF FRL- FACULTY RESEARCH LABORATORIES IN THE EXISTING SPACE IN FACULTY E

Amount

SUPPLY, INSTALLATION, TESTING & COMMISSIONING LAB furniture

Jet Black Granite Top 18 ±1 mm THICK . a) Zero water absorption, high temperature ,chemical and stain resistance and can be repolished. b) Green environment , no toxin and no radiation The major material is environmental friendly, During the production have been eliminated the radiated element. c) CNC MACHINED ,CUT & DRILLED IN MM .

450 MM 1D1S module : - 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet.Telescopic Hafele Germany Make ( Model No. - HA422.58.335 ). SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance.

600 MM 1D2S Module: - 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet.Telescopic Hafele Germany Make ( Model No. - HA422.58.335 ). SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance.

LegSpace 600 MML Detachable 3 Piece Legspace easy to mount & easy to remove legspace . Having two plastic nobs . Front & Back Support for Granite .

LegSpace 750 MML :- Detachable 3 Piece Legspace easy to mount & easy to remove legspace . Having two plastic nobs . Front & Back Support for Granite .

Service Panel Size 300MM L X 135MMD X 2400 H

Granite Support 220 MM L

Granite Support 370 MM L

End Close Panel 220 MM L

End Close Panel 370 MM L

SUPPLY, INSTALLATION, TESTING & COMMISSIONING of

750 MM 1D2S Module: - 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet.Telescopic Hafele Germany Make ( Model No. - HA422.58.335 ). SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance.

750 MM 2S Sink Module :- 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet.SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance. A Sink Outlet pre-provisioned inside the module as per site .

Gable Leg

Electric Trunking :- 120 x 120 mm Cross Section Trapozodal trunk carring electrical & Data wires , holding switch & Sockets . Taper way to avoid wire plug bends. Robist construction with easy openable panel .

5/15 Amp electrical sockets and 15 Amp one way switch ( One Data Connection at the end ) Make :- Havels / Northwest / Legrand

Island Middle Frame

Double Side Reagent Rack :- Multi Stage Storage Racks with 120 x 120 mm Cross Section Trapozodal trunk carring electrical & Data wires , holding switch & Sockets . Taper way to avoid wire plug bends. Robist construction with easy openable panel . Having two slotted pillars for adjustable rack . fixte below granite complete non-visible screw structure .

PP Sink Make :- Premier Polymer/Citizen

SS Sink Make :- Nirali /Polymer/RWD

One Way Water Swan Neck Faucet , Make :- RWD/BROEN/Premier Polymer /Far

Front Close Panel

CORNER TABLE SIZE:- 1030MML X 1030MM D X 900 MMH :- 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet. SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance. 810 MM 1D2S Module: - 16 Gauge Front Structure & 20 Gauge Body . Shutter Thickness 25 mm . Cabinet shutter will be in double skin construction and shall be provided with heavy duty, knuckle and barrel type SS hinges and positive catch arrangement. Modules made up of Tata Galvano 0 Single Pass Skin sheet.Telescopic Hafele Germany Make ( Model No. - HA422.58.335 ). SS Butt Hinges - Hafele Germany. Make. Handle : - Aluminium Conceal type . The under module shall be fabricated out of heavy gauge special grade Galvanized Iron sheet in weldless construction and shall be finished with pure 8 tank process Epoxy coating for extra ordinary corrosion resistance.

SS Safety Shower Cum Eye Wash Make:- Fire Nation/ RWD/ Premier Polymer

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(f) Group C -- with Cat B Modular Accessories

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.

(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

(k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit)

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.

(b) Cat B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 15/16 A modular socket outlet and 15/16 A modular switch connection painting etc. as required.

(b) Cat B

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required)

(b) 6 way with 100A MCCB as Incomer, double door, Cat B

Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphatized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)

(d) 4 way (8+12), double door, Vertical type, Cat B

(e) 8 way (8+24), double door, Vertical type, Cat B

(f) 12 way (8+36), double door, Vertical type, Cat B

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)

(a) 4 way single door Cat A

(b) 8 way single door Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(f) SP, Cat B

(c) DP, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(j) TPN, Cat B

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(i) TP, Cat B

(j) TPN, Cat B

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required

Supply installation testing and commissioning of cable end box of CRCA sheet, RAL 9003, powder coated, either top or bottom, suitable for cable shown on drawings for VTPN DBs etc

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required.

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.

(a) Cat A

Supply of 40W OPTIMA BATTEN CONDUIT MOUNTING, Wipro Cat no LL24-541-XXX-57-CD or Havels STOUT PLUS CAT NO 1200BS40WLED840SPCWH complete with necessary conduit / wall mounting clamps

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 25 W-32W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 6U wall mount rack (Dimension-DxWxH– 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH– 450x550x500 mm) as per specification No. WG-NAS/RAK

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid separately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid separately).

(b) In rocky strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 1/2 Core 120 sq.mm

3 1/2 Core 95 sq.mm

3 1/2 Core 50 sq.mm

3 1/2 Core 25 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

3 1/2 Core 120 sq.mm

3 1/2 Core 95 sq.mm

3 1/2 Core 50 sq.mm

3 1/2 Core 25 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

(5) 4 x 16 Sq. mm.

Supplying, erecting & terminating XLPE armoured cable 1100 V. 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

(3) 4 Core 4 sq.mm

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc., complete as required.

a)100mm width x 50mm depth

b)150mm width x 50mm depth

d)300mm width x 50mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc., complete as required.

a)100mm width x 50mm depth (16 SWG)

b)150mm width x 50mm depth (16 SWG)

d)300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc., complete as required.

a)100mm width x 50mm depth (16 SWG)

b)150mm width x 50mm depth (16 SWG)

d)300mm width x 50mm depth (16 SWG)

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying & erecting on line UPS pure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Design , supply ,installation testing and commissioning ofAnalytical chemistry labs raw power panel cubical type ,wall/floor mounted , front access ,fully compartmentalised with cable entry at top/ bottom, all mccbs with rotary handles ,with thermal magnetic releases. Steel sheets used in the construction shall be 2 mm thick. All sheet steel work shall undergo a process of degreasing, pickling in acid, cold-rinsing, phosphating, passivating and then sprayed with a high corrosive resistant primer. The finishing treatment shall be by application of two coats of synthetic enamel paint or powder coating. The panel shall be of adequate size with a provision of 25% spare space to accommodate possible future switch gear and with extensible bus bars. The cable terminations shall be suitable for cable sizes as shown on the drawing as required etc. with

Incomer 160A TPN,35kA mccb suitable 31/2cx95sqmm ayfy cable

1 set of digital multifunction meter with Amps, Volts, Kwh, Hz,PF etc. with scada connectivity with necessary cts and suitable RS485/232 port

400A 4P 50KA extensible copper bus bars of 99.9% purity electrolytic copper

Outgoings each with on off indications

3 set of 125A , 4P MCCB suitable for 4cx50sqmm YWY cable

1 Spare Compartment

Analytical Chemistry Labs Raw Power panel in LT panel room as above

Design , supply ,installation testing and commissioning of Analytical Chemistry Lab DG back power panel cubical type ,wall/floor mounted , front access ,fully compartmentalised with cable entry at top/ bottom, all mccbs with rotary handles ,with thermal magnetic releases. Steel sheets used in the construction shall be 2 mm thick. All sheet steel work shall undergo a process of degreasing, pickling in acid, cold-rinsing, phosphating, passivating and then sprayed with a high corrosive resistant primer. The finishing treatment shall be by application of two coats of synthetic enamel paint or powder coating. The panel shall be of adequate size with a provision of 25% spare space to accommodate possible future switch gear and with extensible bus bars. The cable terminations shall be suitable for cable sizes as shown on the drawing as required etc. with

Incomer 100A TPN,35kA mccb suitable 31/2cx95sqmm ayfy cable

1 set of digital multifunction meter with Amps, Volts, Kwh, Hz,PF etc. with scada connectivity with necessary cts and suitable RS485/232 port

200A 4P 50KA extensible copper bus bars of 99.9% purity electrolytic copper

Outgoings each with on off indications

3 set of 63A , 4P MCCB suitable for 4cx25sqmm YWY cable

1 Spare Compartment

Analytical Chemistry Labs DG back up Power panel in LT panel room as above

Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required

(a) 100 A Adjustable 35/40 KA, CAT B

(b) 125 A Adjustable 35/40 KA, CAT B

(c) 160 A Adjustable 35/40 KA, CAT B

(d) 200 A Adjustable 35/40 KA, CAT B

Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6A/10A/16A/20A/25/A as per specification no SW-RCCB/RCBO

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.

(b)In tees, angles, flats and channels

Providing & Fixing of Aluminium Lay in Plain Tile Ceiling on 24 /14 mm 'T' Framework of module 600mm X 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. The tile shall be manufactured on advanced equipment, which includes several leveling. The tile end shall be raised up ward & bend outward to lay the tile in framework. The tile shall be Polyester based, Powder coated in white color. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main Tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross runner shall be suspended at 600 mm center to centre and further supported with 24 /14 mm cross Tee at 600 mm centre to centre with internal locking arrangements to form grid of 600mm X 600mm. The main Tee shall be supported by means of 4mm GI rod from slab / roof. The suspension shall be provided at 1200mm to 1500 mm centre to centre. Tee framework would be made of GI and Powder coated.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/ HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FFFAAS/HTR

Supplying, installing, testing and commissioning remote HTR response indicators complete as per specification no. FFFAAS/RRI

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, installing, testing and commissioning 2 Zone, local signal control panel (LCP) with standard accessories complete as per specification no. FF-FAAS/LCP

Supplying & erecting Siemens type brass cable glands for 2 to 4 core 2.5 sq. mm. /2 to 4 core 4 sq. mm. /2 core 6 sq.mm. for XLPE armoured cable as per specification no. CBGL

Supplying, installing, testing and commissioning of Outdoor type Air-cooled Condensing units of capacity not less than 8.5 tons of BLUE STAR / VOLTAS / DAIKIN make each having single scroll compressor, copper tube aluminium finned condenser coil with special weather protective coating, condenser fans, mounting frame epoxy coated/painted, Temperature controller for automatic ON-OFF of compressors with sensor, vibration isolators and first charge of environment friendly refrigerant and oil.

Supplying, installing, testing and commissioning of Outdoor type Air-cooled Condensing units of capacity not less than 5.5 tons of BLUE STAR / VOLTAS / DAIKIN make each having single scroll compressor, copper tube aluminium finned condenser coil with special weather protective coating, condenser fans, mounting frame epoxy coated/painted, Temperature controller for automatic ON-OFF of compressors with sensor, vibration isolators and first charge of environment friendly refrigerant and oil.

Supplying, installing, testing and commissioning of OSTBERG / CARYAIRE / VTS Make low noise type Inline Fan for supplying outside fresh air to two AHUs. Capacity of the unit shall be 2000 CFM at 20 mm static. The unit shall be complete with blower driven by motor suitable for 230 + 10% volts, 50 cycles, Multi-speed controller, flexible at fan outlet, vibration isolators and SS birdmesh with cowl as required.

Supplying, laying / fixing, testing and commissioning of MANDEV / RAJCO / INDIGO make refrigerant copper piping of 12.7 mm dia for Liquid line with 0.8 mm wall thickness soft drawn copper pipe for liquid line along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves all with insulation of 10/12 mm thick ARMAFLEX / KFLEX make 'O' class elastomeric nitrile rubber finished with 7 mil glass cloth for protection against mechanical damages, fungal growth, flame spread and water permeance complete with OEM standards of air conditioning system. Pipes running outside building exposed to sunlight shall be given UV protection coating. All pipes shall be laid in sheet metal trays which will be measured separately.

Supplying, laying / fixing, testing and commissioning of MANDEV / RAJCO / INDIGO make refrigerant copper piping of 22.2 mm dia for Liquid line with 0.8 mm wall thickness soft drawn copper pipe for liquid line along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves all with insulation of 19 mm thick ARMAFLEX / KFLEX make 'O' class elastomeric nitrile rubber finished with 7 mil glass cloth for protection against mechanical damages, fungal growth, flame spread and water permeance complete with OEM standards of air conditioning system. Pipes running outside building exposed to sunlight shall be given UV protection coating. All pipes shall be laid in sheet metal trays which will be measured separately.

Supplying, laying / fixing, testing and commissioning of MANDEV / RAJCO / INDIGO make refrigerant copper piping of 28.6 mm dia for Liquid line with 0.8 mm wall thickness soft drawn copper pipe for liquid line along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves all with insulation of 19 mm thick ARMAFLEX / KFLEX make 'O' class elastomeric nitrile rubber finished with 7 mil glass cloth for protection against mechanical damages, fungal growth, flame spread and water permeance complete with OEM standards of air conditioning system. Pipes running outside building exposed to sunlight shall be given UV protection coating. All pipes shall be laid in sheet metal trays which will be measured separately.

Supply, fabrication, installation and testing of machine made sheet metal ducts fabricated from 24 gauge (0.63 mm thickness) galvanized steel sheets of TATA/JINDAL make complete with joints, galvanized angle supports with full threaded rods, anchor fastners, 4 mm thick neoprene rubber gaskets, etc. as per the approved shop drawing and as required by BIS requirements. Scope shall include air balancing and submission of report. Payment shall be made for the surface area of installed ducts with measurements taken along the center line of ducts on a linear basis with no additional payment for bends/transitions.

Supply, fabrication, installation and testing of machine made sheet metal ducts fabricated from 22 gauge (0.8 mm thickness) galvanized steel sheets of TATA/JINDAL make complete with joints, galvanized angle supports with full threaded rods, anchor fastners, 4 mm thick neoprene rubber gaskets, etc. as per the approved shop drawing and as required by BIS requirements. Scope shall include air balancing and submission of report. Payment shall be made for the surface area of installed ducts with measurements taken along the center line of ducts on a linear basis with no additional payment for bends/transitions.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supply, installation testing and commissioning of Fire dampers fabricated from 18/20 guage galvanized steel sheets complete with fusible link, spring, etc. as per approved shop drawings and at locations shown in tender drawings.

Fire Dampers

Fusible Links

Supply, fabrication, installation an testing of flexible canvass connections constructed between Fresh air unit / Air Handling units / ducting of required size with fire resist flexible double canvas sleeve complete

Supply and fixing of External Thermal insulation on Return air ducts with ARMAFLEX / KFLEX make 'O' class 19 mm thick Nitrile rubber foam of 40-60 kg density having black glass cloth finish stuck with adhesive recommended by the insulation manufacturer. All joints shall be sealed with tapes recommended by the insulation manufacturer. Entire work shall be carried out with good workmanship. (Measurement shall be same as bare duct surfacearea)

Supply and fixing of External Thermal insulation on Supply air ducts with ARMAFLEX / KFLEX make 'O' class 25 mm thick Nitrile rubber foam of 40-60 kg density having black glass cloth finish stuck with adhesive recommended by the insulation manufacturer. All joints shall be sealed with tapes recommended by the insulation manufacturer. Entire work shall be carried out with good workmanship. (Measurement shall be same as bare duct surface area)

Supply and installation of External Thermal insulation on all ducts located outside the building ARMAFLEX / KFLEX make 'O' class 40 mm thick Nitrile rubber foam of 40-60 kg density having black glass cloth finish stuck with adhesive recommended by the insulation manufacturer. All joints shall be sealed with tapes recommended by the insulation manufacturer. Scope shall include providing weather-proof coating on the insulation as recommended by the insulation manufacturer. Entire work shall be carried out with good workmanship with all joints fully sealed. (Measurement shall be same as bare duct area)

Supply and installation of condensate drain piping from Air Handling units to the drain disposal point using heavy gauge ASTRAL / PRINCE make UPVC pipes including necessary fittings such as U-trap, Bends, Tees, Reducers, suitable supports, insulation with 12 mm thick ARMAFLEX / KFLEX make 'O' class Nitrile rubber foam insulation with suitable adhesive and then cover with glass cloth layer. Scope shall include making required openings in wall wherever required and then finishing.

50 mm dia Drain Piping

40 mm dia Drain Piping

Supplying, erecting & terminating XLPE armoured cable for Air Handling unit motor 4 core 10 sq. mm. copper conductor with continuous 5.48 sq. mm (12 SWG) G.I. earth wire complete erected with double compression glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable for Air Handling unit motor 4 core 6 sq. mm. copper conductor with continuous 5.48 sq. mm (12 SWG) G.I. earth wire complete erected with double compression glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with double compression glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height comprising all required standard accessories.

International Marketers For Scientific Equipments and Technologies