Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹35.6 L+₹12.0 L (50.8%)Rejected-Finance BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L2 | Rejected-Finance Other than L1. |
Tender Value
₹25.8 L
EMD Value
₹51,600
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN 914 134 C/o 56 APO
SPL REPAIR TO FLEXIBLE AND RIGID (BITUMINOUS AND CEMENTED ROADS) PAVEMENTS AT VARIOUS LOCATION AT SONAMARG AND MANASBAL GRN UNDER GE 970 EWS.
2022_MES_545172_4
134 WE-41(T)/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 970 EWS
₹51,600
Yes
16 Mar 2023
21 Jan 2023
18 Feb 2023
21 Jan 2023
16 Feb 2023
28 Jan 2023
Amount
RIGID PAVEMENT (BITUMINOUS ROAD)
M&L for repair to potholes of area not exceeding 1.0 Sqm each, including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm, putting in Premixed Bituminous Macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30mm, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer @ 05 Kg / 10 Sqm of paving bitumen VG-30, complete all as specified and directed by Engineer-in-Charge.
M&L for bituminous premix asphaltic semi dense concrete (SDAC) 40mm thick (consolidated thickness) with 5.5% paving bitumen of Grade VG-30 binder content by weight of total mix, laid with mechanical paver and rolled, compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed by Engineer-in-Charge. Notes :- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE. (iii) Contractor shall quote his rates by considereing binder contents @ 5.5% of total mix by weight, however in case of any variation on lower side in weight of binder contents as per actual mix design , the same shall be ajusted @ Rs. 60/Kg of bitumen.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm and thickness exceeding 50mm but not exceeding 100mm deep and removing thereof as accounted under credit, complete all as specified and directed by Engineer-in-Charge.
M&L for premixed bituminous macadam (consolidated thickness 75mm or less) with paving bitumen of Grade VG-30 contents @ 4% by weight of total mix, mixed in Hot Mix Plant and laid with mechanical paver and rolled and compacted to required camber & gradient with using 8 to 10 tonne power roller roller to achieve uniform smooth surface including applying evenly a priming/ tack coat with bituminous primer (VG-10) @ 5 KG per 10 Sqm, complete all as specified and directed. Notes :- (i) Bituminous macadam shall prepared in central computerised hot mix plant. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE. (iii) Contractor shall quote his rates by considering binder contents @4% of total mix by weight, however in case of any variation on lower side in weight of binder contents as per actual mix design , the same shall be ajusted @ Rs. 60/Kg of bitumen.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the line not exceeding 10cm in width with applied hot thermoplastic road marking paint of approved colour (white or golden yellow), confirming to BS-3262-1989 with special applicator machine, complete all as per manufacturer's instructions and directed by Engineer-in-Charge.
S&F metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia height reflective reflectors, made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150mm x 150mm x300mm) type B-1 complete all as per manufacturer's instructions and directed by Engineer-in-Charge.
S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0, fixed with and incl MS stud of suitable size as per manufacturer's instructions and directed by Engr-in-Charge.
FLEXIBLE PAVEMENT (CEMENTED ROAD)
Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thick (below or above ground level), complete all as specified and as directed.
M&L PCC 100mm thick 1:3:6 type C-2 using 40mm graded stone aggregate finished even and smooth without using extra cement layed alternative bays, complete all as specifed and directed.
M&L PCC 100mm thick 1:2:4 type B-2 using 40mm graded stone aggregate finished even and smooth without using extra cement layed alternative bays, complete all as specifed and directed.
M&L forming contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade 'A' and complete all as specified and directed.
M&L for wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings and finished even and smooth, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in kerb, complete all as specified and directed.
Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of PCC bands in walls, horizontal or sloping and similar work all exceeding 20cm wide of rough finished surface of concrete, complete all as specified and directed.
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .