Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹86.0 L+₹9.1 L (11.8%)Rejected-Finance SKALZANGLING AIR PORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-Finance Other Than L1 Bidder | |
| 3 | L3₹93.9 L+₹17.0 L (22.1%)Rejected-Finance C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L3 | Rejected-Finance Other Than L1 Bidder |
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
REPAIR /REPLACEMENT AND MAINT OF SOAKAGE WELLS, SEWAGE LINES, SEPTIK TANKS AND MANHOLES INCLUDING CONNECTED ITEMS UNDER GE 865 LEH
2023_MES_597660_1
138WE/L-28/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 865 EWS
₹2.0 L
Yes
16 Sept 2023
23 May 2023
4 Jul 2023
23 May 2023
27 Jun 2023
13 Jun 2023
Amount
Desludging/cleaning including dewatering of septic tank/soak well/manholes in any dia and depth upto 1.5 mtr for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MoD land/premises at any distance complete all as specified and directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all materials, labour of skilled/unskilled, tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.
Desludging/cleaning including dewatering of septic tank/soak well/manholes in any dia and depth exc 1.5 mtr but not exc 3.00 mtr for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all materials, labour of skilled/unskilled, tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.
M&L for soak well/soak pit of dia 3.00 mtr internal at top and depth of 1.80 mtr from botton having min 2.45 mtr height 380 mm thic random rubble uncoarsed stone masonary wall in CM 1:6 with 150 mm thick PCC 1:4:8 type D2(Using 40 mm graded aggregate) below stone masonary at Bottom ad RCC coverslab using Design mix concrete M-25 or 1:1.5:3 nominal mixwith reinforcement 10 mm dia bars @ 150mm C/C both ways top and bottom layer of concrete including arrangement for manhole opening and manhole cover, inlet for 100/150 mm dia pipe connected with existing manholes including dismantling and filling of existing soak well/soal pit and make a true surface complete all as specified as per Drg No. CESZ/TD-1078/2011 sheet 1/1 Note :- The rate includes excavation in hard/dense soil and construction of soak well as per drawing, connection of inlet pipe, 100 mm dia PVC vent pipe with cowel, returning and filling and removing of surplus soil to a distance exc 50 mtr but not exc 100 mtr from site. If any issues regarding drawing finalized by Engr in Charge during execution.
M&L for cleaning of blocked /ice frozen drain pipes 100mm to 200 mm bore by pouring hot water , rodding from trap to manhole to septic tank or vice versa and well flushing with water after cleaning including manholes and removing waste material to a distance n.exc 50m and burying in pits and refilling the same complete all as specified and directed by Engr-in charge . NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate
M&L for cleaning of cast iron/pvc pipes 100 mm to 150 mm bore pipes by rodding with iron rod , jute bags and well flushing after cleaning complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning of cast iron/pvc pipes 50 mm to 75 mm bore pipes by rodding with iron rod , jute bags and well flushing after cleaning complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning of floor traps upto 100mm dia and remove waste material to a distance n.exc 50m and burying in pits complete all as specified and directed by Engg-in charge . NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate
M&L for cleaning of water closet blocks and remove waste material to a distance n.exc 50m and burying in pits complete all as specified and directed by Engg-in charge . NOTE: The complaint shall be cleared within 24 hrs after intimation to contractor if not then recovery @ Rs. 350 per such complaint shall be levied on contractor
S&F in repairs viterous China wash down water closet pan (padestal pattern) white with suitable 'P' or 'S' trap (excluding fixing bolts , flushing cistern and flush pipe) including bedding with PCC 1:2:4 type B-I , using 20 mm graded crushed stone aggregate complete all as specified and as directed by Engr-in-Charge.
S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest, Dia 100 mm suitable 'P' or 'S' trap (excluding cistern) with front or back inlet and pattern including bedding with PCC 1:2:4 type B-I , using 20 mm graded crushed stone aggregate complete all as specified and as directed by Engr-in-Charge.
S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and as directed by Engr-in-Charge.
S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engr-in-Charge.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etccomplete all as specified and as directed by Engr-in-Charge.
Excavation over area n exc 1.50 m deep and getting out in hard/dense soil for Septic tank , Manhole complete all as specified and as directed by Engr-in-Charge.
Excavation over area exc 1.50 m deep and n exc 3.00m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.
Excavation over area exc 3.00 m deep and n exc 4.50m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.
M&L for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation complete all as specified and as directed by Engr-in-Charge.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
Ditto as item No 20 above but except blocks complete all as specified and as directed by Engr-in-Charge.
M&L RCC 1:2:4, type B1(20 mm grade aggregate ) in Slabs supported on walls , beams and columns, in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-Charge..
M&L RCC 1:2:4, type B1 (20 mm grade aggregate ) as in foundations, including rafts, footings, foundations beams : plinth beams: bases for column, etc " basement slabs , under reamed piles ad mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L form work to soffits of suspended flat slabs such as roof slabs ,floor slabs, landings and similar works (smooth finished flat surface of concrete) not exceeding 200mm thick (Horrizontal or sloping) complete all as specified and as directed by Engr-in-Charge.
M&L form work to to edges of concrete flat n exc 20 cm wide rough finished complete all as specified and as directed by Engr-in-Charge.
M&L for mild steel steel TMT bars 10mm dia and over cut to length bent to shape required ,including cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia for manhole/soakage well cover complete all as specified and as directed by Engr-in-Charge.
M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs and the like position set in cement mortar 1:6 (reinforcement shall be measured & paid separately) complete all as specified and as directed by Engr-in-Charge.
M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with water proofing compound 3% of cement without using extra cement in cement mortar 1: 4 ccomplete all as specified and as directed by Engr-in-Charge. Note : Rate includes material for water proofing compound
S&F PVC vent cowl 100/110mm dia complete all as specified and as directed by Engr-in-Charge.
M&L Cement concrete 1:3:6, type C2 (using 40mm graded crrushed stone agg) as in foundation filling and mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L PCC 1:2:4, type B-1(using 20mm crushed stone graded aggregate) as in coping, benching etc including necessary chamfering, weathering, throating etc and including forms works and set in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15mm thick plaster in CM 1:6 on other than fair faces of brick work or concrete surface finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed by Engr-in-Charge.
Dismantling floor hearth or wall tiling incl CM bedding (but not backing) removing serviceable tiles to store and rubbish on the premises complete all as specified and as directed by Engr-in-Charge.
M&L Glazed ceramic coloured tiles in vertical surfaces 300 X 200 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:3) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge.
M&L Glazed ceramic coloured tiles in vertical surfaces 350 X 250 X 7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:3) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge.
M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed (1:6) etc complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for sewage line, septic tank, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.
Dismantling of cast iron /PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:4:8 , type D -2 (40mm gradded aggergate) bed to drain pipe 150mm dia pipe incl packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed by Engr-in-Charge.
S&F 150mm dia bore (inner dia) double wall corrugated HDPE pipe (SN 8) in any length including all fittings and jointing with eastomeric rubber link and cuppler/other jointing materials laid in trenches or in floor complete all as specified and as directed by Engr-in-Charge.
S&F 110mm dia bore PVC pipes single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints , laid in trenches or in floors including PCC 1:4:8 type D-2 (using 40mm draded aggregate) bed to drain complete all as specified and directed by Engr-in-charge.
S&F110mm bore PVC (SWR) pipe bends complete all as specified and as directed by Engr-in-Charge.
S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber joints fixed to walls complete all as specified and as directed by Engr-in-Charge.
S&F 75mm bore PVC (SWR) pipe bends complete all as specified and as directed by Engr-in-Charge.
S&F PVC reducer of 110mm dia complete all as specified and as directed by Engr-in-Charge.
S&F PVC reducer of 75mm dia complete all as specified and as directed by Engr-in-Charge.
S&F PVC (SWR) T (Single T) of 110mm dia complete all as specified and as directed by Engr-in-Charge.
S&F PVC (SWR) T (Single T) of 75mm dia complete all as specified and as directed by Engr-in-Charge.
Cutting into existing manholes for connecting new drains, internal dia of pipe 100 mm making good to pipe & rendering cutting out existing benching for forming branch channel (1/2) to or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished,complete all as specified and as directed by Engr-in-Charge.
Cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm making good to pipe & rendering cutting out existing benching for forming branch channel (1/2) to or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished complete all as specified and as directed by Engr-in-Charge.
Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and as directed by Engr-in-Charge.
Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate for plinth protection/ pathcomplete all as specified and as directed by Engr-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.
M&L for Cement concrete 1:4:8, type D-2, (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed by Engr-in-Charge.
Material and labour for chequred cement concrete tiles 300x300x20-22mm thick set, (with grey cement and pigment) jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:6 with coloured cement to match the shade of tiles complete all as specified and as directed by Engr-in-charge.
M&L Applying two coats of cement base paint on new plastered wall surfaces including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
M & L preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed by Engr-in-Charge.
S &F in repairs Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches n. exc 1.5m wide and n exc 1.5m deep and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-Charge.
M&L for Cement concerete bed to drain pipes incl packing under haunching against the sides of pipes after they are laid tested in 1:4: 8 type D-2 using 40 mm graded stone aggregate of bore of pipe upto 450mm complete all as specified and as directed by Engr-in-Charge.
S&F 300mm dia bore (inner dia) double wall corrugated HDPE pipe (SN-8) in any length including all fitting and jointing with eastomeric rubber link and cuppler/other jointing material laid in trenches are in floors complete all as specified and as directed by Engr-in-Charge.
S&F 200mm dia bore (inner dia) double wall corrugated HDPE pipe (SN-8) in any length including all fitting and jointing with eastomeric rubber link and cuppler/other jointing material laid in trenches are in floors complete all as specified and as directed by Engr-in-Charge.
S&F 450mm dai bore Reinforced concrete Pipe class NP-3 with one collar per length of pipe complete all as specified and as directed by Engr-in-Charge.
Demolition and breaking up drain pipes 100mm/150mm/200mm/300mm dia salt glazed ware, (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and as directed by Engr-in-Charge.
M&L for walling of random rubble , uncoursed , built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge.
S & F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 75MM PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-Charge.
Cutting in to existing man holes for connecting new drains, making good to pipes and rendering cutting out existing banching & forming branch channel in cement cocrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150/200mm pipe complete all as specified and as directed by Engr-in-Charge.
Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching including weathering slightly rounded or chamfered angles including necessary form work and mixing of integral water proofing compound as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. (Water proofing compound shall be measured and paid separately).
Rendering 15mm thick cement plaster on brick masonry surfaces in cement mortar 1:4 finished to even & smooth surfaces (without using extra cement) including mixing of integral water proofing compound in the proportion as mentioned in manufacturer's instructions, complete all as specified and as directed by Engr-in-Charge.. (Water proofing compound to be measured and paid for separately as supply only).
Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.
Cleaninig of septic tank and raw sewage by mechanically od Manually of any size by taking out Mud/Sludge from septice tanks of any depth including dewatering in foul conditions and confined places, getting out and removing the sludge to a distance exc 250m and n exc 500m and depostited where directed in excavated bprrow pit and including excavation of borrow pits and covering the borrow pits with 10cms thick layer of soil including spreading of bleaching powder before and after covering the borrow pit with soil to maintain hyzenic enviroment complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning of water closet blocks and waste material to a distance manhole of depth n exc 50 mtr and burying in pits and refiling tha same complete all as specified and as directed by Engr-in-Charge. (Note :- The complaint shall be cleard with in 24 hrs after intimation to contractor if not then recovery @ shall be levied on contractor.
M&L for cleaning of Manhole and waste material to a distance manhole of depth n exc 1.50 mtr and burying in pits and refiling tha same complete all as sfd and directed by Engr-in-Charge (Note :- The complaint shall be cleard with in 24 hrs after intimation to contractor if not then recovery @ shall be levied on contractor.
M&L for cleaning of Manhole and waste material to a distance manhole of depth exc 1.50 mtr and n.exc 3 mtr burying in pits and refiling tha same complete all as sfd and directed by Engr-in-Charge (Note :- The complaint shall be cleard with in 24 hrs after intimation to contractor if not then recovery @ shall be levied on contractor.
Cleaning og blockage manually by rodding pumping etc and removing the deposited sludge/sold/liquid material and removing to out side MOD land complete all as specified and as directed by Engr-in-Charge. from water closet ( IWC/EWC) trap & CI pipe line upto first manhole
Cleaning of underground sewage line of any dia including manholes of nay description and any depth by removing any type of blockage including de sitiling and de chocking manually by providing rodding and flushing with water afetr cleaning including cleaning of manhole by removing sludge site solidf etc and refixing all as directed and full sartisfaction of Engineer-in-charge.
M&L for cleaning of cast iron pipe 100mm/75mm bore pipes by rodding with just bags and well flushing after cleaingcomplete all as specified and as directed by Engr-in-Charge.
PADMA ENTERPRISES
M/S Praveen Kumar and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .