REPAIR AND MAINT OF AREA LIGHTING, SECURITY LIGHTING AND ASSOCIATED WORKS AT CERTAIN UNITS OF JAISALMER MIL STN UNDER GE (A) JAISALMER

Amount

Taking down old unsv LT Cable of any size etc all as specified and directed.

Laying only underground XLPE cable, PVC sheathed, heavy duty aluminium conducto heavy duty armoured cable 1100 Volts, 25 Sqmm 4 Core fixed on ploe, wall and treanches etc. Note : (a) Excavated and earth work will be measured and paid separately . (b) Cable will be issued under Sch 'B' for free for fixing only at MES store of AGE E/M Jaisalmer.

Laying only underground XLPE cable, PVC sheathed, heavy duty aluminium conducto heavy duty armoured cable 1100 Volts, 16 Sqmm 4 Core fixed on ploe, wall and treanches etc. Note : (a) Excavated and earth work will be measured and paid separately . (b) Cable will be issued under Sch 'B' for free for fixing only at MES store of AGE E/M Jaisalmer.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or soft/dis integrated rock for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified & directed by Engr-in-Charge.

Excavation in trenches in soft/disintegrated rocks exceeding 1.5 mtr deep and not exceeding 3.0 mtr wide for laying of cable and erection of poles a all as specified and directed at site.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified & directed by Engr-in-Charge.

Removing excavated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed by Engr-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engr-in-Charge. (Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified & directed by Engr-in-Charge.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of stay assembly including necessary form work all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F in repair MCCB, 63 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and Engr-in- Charge.Note: ICS = ICU 100%.

S&F in repair MCCB, 100 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engr-in- Charge.Note: ICS = ICU 100%.

S&F in repair MCCB, 125 Amps, four pole, 16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engr-in- Charge.Note: ICS = ICU 100%.

Material and labour for preparation of old painted surface of LT Concrete electric pole of any size by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos), including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and writing of identification Nos with proper stencil cut etc as per directions by Engr-in-Charge.

Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by Engr-in-Charge.

M&L for Marking of Pole Number on PCC/Steel Tubular(HT/LT Pole) with suitable size 15cmx15cm using with sythentic enemal paint colour and using Black colour for Pole numbers etc complete all as specified and directed by Engr-in-Charge.

Taking down existing High Mast light fitting complete light with bracket ring along with their control gear with the help of winch at repairable height and taking up at its original height after repair and renewal of unserviceable material all as specified and directed by Engr-in-Charge. Note : (i) Item/materials required i.e.ballast, igniter, bipin holder, lamp, chock, etc required for measured and paid separately under relevant items under supply only. (ii) Fixing of lamps/tube rod not included in unit rates.

Labour only for attending street light complaints and rectifying the faults viz non ops & flickering of street light, Cable or service wire damage, earth leakage & electric shock in street light poles & panel, hanging or bending of street light etc up to entire satisfaction of Eng-in-Charge including all necessary petty items like lugs, nut, bolts, screws and any type of tool required. Note:-Group of complaints for one feeder will be consider as one job. Complaint slip will printed and supplied by contractor in prescribed format as specified at the time of commencement of contract as directed by Engr-in-Charge. Note: Contractor has to arrange telescopic boom lift for maintenance at height of 15m at his own cost. No extra payment will be paid by department

S& F in repair for lamp holder inner thread type for High Mast Light 400 watts complete all as specified & directed by Engr-in-Charge.

S& F in repair for lamp holder inner thread type for High Mast Light 250 watts complete all as specified & directed by Engr-in-Charge.

S& F in repair for super imposed 3 lead igniter suitable for High Mast Light 150/250/400 Watts complete all as specified & directed by Engr-in-Charge.

S& F in repair for lamp 400 Watt for High Mast Light (MH) complete all as specified & directed by Engr-in-Charge.

S&F in repair for lamp 250 Watt for High Mast Light (MH) complete all as specified & directed by Engr-in-Charge.

S& F in repair for ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) 400 watt complete all as specified & directed by Engr-in-Charge.

S& F in repair for ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) 250 watt complete all as specified & directed by Engr-in-Charge.

S&F in repair, Junction Box for street light made of PVC box including MCB 10Amps - 01 No and terminal 3 Nos for single phase and neutral on porcelain based insulator with locking arrangement fixed to pole with MS clamps of suitable (20mmx3mm) with nuts, bolts & washer including painting of MS clamp complete all as specified & directed by Engr-in-Charge.

S&F in repair, cable 2.5 sqmm Two core, Copper conductor, 1100 volts grade complete all as specified and directed by Engr-in-Charge.

S& Lithium based energy efficient Integrated solar street light of 20 watt in single FRP body with duly polyurenthane coating encases with monocrystalline solar PV panel of 45Wp, Lithium battery 11.1/12.8 Volt, 24.2Ah with inbuit BMS, IP 65, High brightness W-LED (160-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc complete all as specified and directed by Engr-in-Charge. Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint. Make:- Crompton, Axoon, Philips.

Fixing only 1x60 Watt Street Light Fitting including all electrical connection complete all as speicifed and directed by Engr-in-Charge. Note : Street Light fittings shall be issued by department under Sch 'B' free for fixing only.

Fixing only 1x70 Watt Street Light Fitting including all electrical connection complete all as speicifed and directed by Engr-in-Charge. Note : Street Light fittings shall be issued by department under Sch 'B' free for fixing only.

Fixing only 1x90 Watt Street Light Fitting including all electrical connection complete all as speicifed and directed by Engr-in-Charge. Note : Street Light fittings shall be issued by department under Sch 'B' free for fixing only.

S&F in repair, galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings all as directed by Engr-in-Charge.

Supply & laying GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed by Engr-in-Charge.

S&laying in repair for GI pipe light grade of dia 25 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed Specified and directed by Engr-in-Charge.

S&F Nature switch Suitable for three phase integrated modal with SMC enclosures conforming to IP 54 inclusive of senser (NS-02), contactor incoming-outgoing MCBs enclosure etc complete suitable for 12-18KW, 40Amp per phase complete all as specified and directed by Engr-in-Charge. (Make :- SWADEEP-02 EC128KW 3 P , Indoasian, L&T).

Supply, transportation fixing and errection of Steel Tubular Swaged poles in repair complete with cast iron base plate, finial taper pulg, bolts, nuts and screws as specified type 410 SP-31 (9.0 meters long) and including making alternate white and black strips 30cm height (Total 05 Nos) with two coats of synthetic enamel paint over a coat primer complete all as specified and directed by Engr-in-Charge.

Supply, transportation fixing and errection of prestressed cement concrete pole in repair 9 metre long, minimum cross section 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class -10 confirming to IS-1678 and including making alternate white and black strips 30 cm height (Total 5 Nos ), with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Supply, transportation fixing and errection of prestressed cement concrete pole in repair 11 metre long, minimum cross section 152 mm x 152 mm at top and 152 mm x 260 mm at bottom class -9 confirming to IS-1678 and including making alternate white and black strips 30 cm height (Total 5 Nos ), with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M & L for Off load change over switch of capacity upto 125 Amps,4 pole, 415 Volts,50 Hz complete all accessories and specified and directed.

M & L for Off load change over switch of capacity 200 Amps,4 pole, 415 Volts,50 Hz complete all accessories and specified and directed..

M&L for carrying out of Control wiring of existing timer panel with required suitable size of wire to make the timer Panel functional complete in all respect complete all as specified and directed by Engr-in-Charge.

S&F in repair Digital Astronomical timer switch 240V AC-2W,C/O, Base/DIN type complete for switching of contactors complete all as specified & directed by Engr-in-Charge. Make:- L&T(ASTROMINI), Legrand, Havells,

S&F in repair Contactor Coil suitable upto MNX 40 type complete with taking out old burnt coil and replacing with new coil all as specified and directed by Engr-in-Charge. Make :- L&T, Havells, Legrand.

Supply & Fixing in repair 3 pole Power Contactors confirming to IS/IEC-60947-4-1 complete for upto 55 Amp rating MNX tyype (40) complete all as specified and directed by Engr-in-Charge. Make :-L&T, Havells, Legrand.

Supply fabricate, fixing structural mild steel RS joist, channel angle iron, flate iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clapms, eye hook and back plate etc fabricated from structural steel section inclduing nuts, bolts,washers, welding (Cold and Hot) drilling holes for bolts, bend to any shape or size as indicated and directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed by Engr-in-Charge.

S&F in repair, cable 6 sqmm Two core, aluminium conductor , PVC insulated, unsheathed, 1100 volts grade complete all as specified and directed by Engr-in-Charge.

S& F in repair for the following parts for LED fittings:- Make:- Crompton,Philips,Havells

(a) Driver 75W Make-Crompton,Havells,Philips

(b) Driver 100W Make- Crompton,Havells,Philips

S& F in repair for the following parts for LED fittings:- Make:- Crompton,Philips,Havells

(a) Surge Protector upto Voltage 5 KV 75 Watt, Make-Crompton,Havells,Philips

(a) Surge Protector upto Voltage 5 KV above 75 Watt upto 150Watt, Make-Crompton,Havells,Philips

Supply and fixing in repair (DOG)aluminium conductor steel reinforced [ACSR] straining properly on insulators on PCC pole 11mtr long and binding with aluminium tape/binding wire, connectors, jumpers etc including taking down old ACSR conductor complete all as specified and directed by Engr-in-Charge of required size.

M & L for stay assembly comprising of 16 mm dia,1.80 meter long galvanized stay rod,having 7/3.15 mm GI stay wire stranded and 230 mm x 230 mm x 6 mm thick stay plate,complete all as shown on electric plate No.1 of SSR part-I 2009 with and including all necessary fittings/accessories like loop insulators,stay clamps complete all as specified and directed.

S R ENTERPRISES

Leelashah Enterprises

M/s Ramesh & Company

SS SODHA ENTERPRISES

M/S SUMAN ENTERPRISES

M/S SHRI HARI CONSTRUCTION COMPANY

S.G.ENGINEERING COMPANY

OLIVE EXPORTS PVT LTD