SE/GC/TIN/C14/2020-21

Amount

Dismantling the existing damaged wooden doors, windows and ventilators including frames, hinges and fastening including cost of lead, lift etc., complete.

Dismantling the existing damaged cement mortar flooring and disposing away the debris including cost of lead, lift, etc., complete

PCC 1:3:6 using 20mm metal without form work including cost of all material, labour, lead, lift, curing, etc., complete

Brickwork in CM 1:3 mix using II class chamber burnt brick of size 9"x41/2"x3" including cost of all materials, labour, lead, lift, curing, etc., complete

Releasing the existing door shutter before laying of tiles and re- fixing door shutter in position after the tile is laid, making necessary alterations for reducing the height of door shutter with new hinges, screws including cost of all materials, labour, lead, lift, T&P., etc complete

Supplying and fixing in position of weld mesh Grill 75x25mm 10 Gauge using 35x35x5 mm ISA for frame with and 25x25x5 mm ISA angle for bracing as per specification including cost of all materials, lead, lift, transportation, etc., complete

Supplying and fixing in position of single leaf half weld mesh 25x25mm, 10 Gauge and half MS sheet door of required size with 35x35x5 mm ISA for outer frame and 25x25x5 mm ISA angle for shutter frame and braced with 20x5 mm flat as per specification including cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift, transportation etc., complete

Supplying and fixing in position of four part weld mesh 25x25mm, 10Ga and M S sheet covered grill window of required size with 35x35x5 mm ISA for outer frame and 25x25x5 mm ISA angle for 20x5 mm flat as per specification, including cost of all materials, fabrication charges, transporting charged, lead, lift, etc., complete

Supplying and fixing in postiion of single leaf 16 mm thick plain cement sheet door with required size of aluminium channel with 35x35x5 mm ISA for outer frame including cost of 2ft door flat necessary fittings, 8" aldrop, bolt & nut, screw, handle as per specification and including cost of all materials, labour, lead, lift, etc., complete

Paving the approved quality vitrified tiles of size 600 x 600 x 8 mm over a base layer of CM 1:3, 20 mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift., etc., complete

Paving the approved quality anti- skid ceramic tiles of size 305 mmx 305mm x 6 mm, over a base layer of CM 1:3, 20 mm thick and pointing with same coloured cement finishing the joints, including cost of all materials , labour , lead, lift., etc., complete.

Dadooing the wall with best approved quality glazed tiles of size 300 x 200 x 6 mm, over a base layer of CM 1:3, 12 mm thick and pointing with same coloured cement finishing the joints including cost of all materials labour lead lift., etc ., complete.

Cement mortar floor finishing with C.M 1:3 , 20mm thick including cost of all materials, labour, lead, lift, etc., complete

Plastering with CM 1:5, mix, 12 mm thick for ceiling including cost of all materials, lead lift, etc., complete

Plastering with CM 1:3, mix 12mm thick for water tank alround including cost of all materials, labour, lead, lift, labour, curing, etc., complete

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD - 70)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V on 7/20 GI beared wire for service connection mains. (SD.65)

Supply and fixing of TNEB meter Board suitable for 32A three phase service connection with 3nos. 32 A fuse unit (500V) 32A neutral link and earth link (1"x1/8" Copper flat) on TW plank of size 600x450x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD-127)

Supply and fixing of 3 phase 4 wire 4 way IDCB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connection on suitable angle iron frame work with earth connection only.(SD-174)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated unsheathed ScCu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. Switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (SD - 17)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch on suitable TW box (SD - 133)

Wiring with 2x4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100 mm x 63 mm TW switch box for 15A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD - 39)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with PVC unsheathed copper leads from terminals to the fitting with tube (SD - 88)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K.Lite ) suitable for incandescent with 12 W LED (SD - 803)

Supplying and fixing of fancy shade approved by engineer at site with 1 no 12W LED bulb (SD - 82)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. (SD.234)

Supplying and fixiing in position of 15/12 mm dia brass screw down bib cock of best quality including cost of materials lead ,lift, labour, etc. complete.

Supplying and fixiing Stainless steel sink of Size 600x450x200mm with 32mm dia 'B' class GI waste water pipe & 32mm dia C.P waste coupling including cost of all materials, lead, lift, labour, etc., complete

Supplying and fixing of Anodised Aluminium Towel rail 60cm long and 20mm dia with Brackets including cost of all materials, lead, lift. Labour, etc., complete

Supplying and fixing of 75mm dia PVC pipe 6Kg/m2 including PVC bend, Elbow wherever necessary including cost of all materials, lead, lift, etc., complete

Providing and fixing in position Indian water closet ORISSA PAN of size 580x440mm white glazed ware of approved make with P or S trap conforming to IS 2556 Part XII (Parryware or equivalent with sand cushion and forming flooring around the closet using 40mm broken brick jelly concrete 1:2:5 100 mm thick and finishing the top to required slope including cost of all materials, lead, lift, etc., complete ( 1 Set)

Supplying and fixing in position cast iron Nahini / Floor Trap (110x75mm) with stainless steel grating approved make and quality and size 100x75mm fixed over a bed brick jelly lime concrete and finished with CM 1:3, including cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and fixing of 110 mm dia PVC pipe with required PVC bend, Elbow wherever necessary including cost of all materials, lead, lift, etc., complete

White washing one coat with shell lime including cost of all materials labour lead lift, T&P etc., complete

Colour washing Two coats using oil bound distemper over one coat of white cement after thorough scrapping including cost of all materials, labour, lead, lift, T&P etc., complete

Painting 2 coats of approved quality enamel paint over a primary coat for all exposed faces of new old steel doors & windows and grill including cost of all materials, scrapping labour, lead, lift etc., complete

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting bending tying and fixing in position as per specification including cost of all materials lead lift cost of binding wire etc complete

Supplying and fixing Pre cast RCC slab using 1:1 5:3 mix concrete for chimney / man Hole cover slab including all cost of materials, lead lift, etc., complete (excluding steel reinforcement)

Supplying and laying of 20mm dia PVC pipe ("B" Class ) with necessary GI Specials including cost of all materials, lead, lift, etc., complete

Applying Two coats using new coat cool over one coat of Prime seal (effloroscene resistant penetrating primer) for roof top after thorough scrapping cleaning including cost of all materials , labour, lead, lift, T&P etc., complete

GST 12% as per Govt. Norms

N KANTHASAMY

Reginald Michael Dhas