SPECIAL REPAIRS TO Bldg NO 51 OF THE MARATHA LIRC AND SPECIAL REPAIRS TO Bldg NOS P-143 AND P-210 OF THE MARATHA LIRC UNDER GE BELGAUM.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete all as specified and as directed.

Dismantling wooden battens for tiles, shingles etc of size n exc 15 cm including tilting fillets etc, and removing rubbish off the premises and old unserviceable tiles taken as credit complete all as specified and as directed.

Demolition of cement concrete , unreinforced in ground floors and paving not exceeding 15cm thick above or below ground level etc including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 including demolition of old PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level and removal of rubbish off the premises, complete all as specified and as directed

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed including replacing old and decayed timber (including piecing, scaryfing, etc., of old and new timbers if required) and removing defective portions and dismantling timber scantlings 40 sq. cm and over in section, in any position, unframed work, etc and taken as credit complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:2:4, type B2 (using 40 mm graded stone aggregate) as in surface channel and drain , complete all as specified and as directed.

Extra for forming fair finished drains or channels 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75 mm thick finished over and smooth without using extra cement etc including necessary steel form work completed all as specified and as directed.

Supply and fix Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Conforming to grade Fe 410 W Gde E-250 quality A completed all as specified and as directed.

Supply and fix in repairs Mild steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and as directed.

Supply and fix Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc and similar work conforming to Fe-290 Gde E-165 completed all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Aluminium composit panel board 4mm thick as in cladding /bush board with aluminium frame work of size 35mm x 25mmx2mm thick aluminium section with necessary fitting and scaffolding etc, including diamantling of existing wooden / steel frame etc, of any description and taken as credit complete all as specified and as directed

Supply and fix PVC (SWR) eaves gutter Half Square/half round /trapezoidal profile 150mm dia including pipe accessories viz: PVC holder bats bolts nuts et and including dismantling of exsiting rain gutter of any description and taken as credit complete all as specified and as directed. Make :Finolex/Supreme

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Providing and fixing decorative false ceiling of 10mm thick plaster of paris (POP)ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh, fixed in ceiling flat or sloping with high grade anodised aluminium snap grid frame work for flase ceiling and applying two coats of distemper oil emulsion over a coat of putty on surface ceiling including dismantling ceiling and wall boards or insulation board any thickness including cover fillets etc,and taken as credit complete all as specified and asdirected. Note: Make of False Ceiling Saint Gobain Gyproc,Armstrong,Aerolite,Navratan Specialty Chemicals LLP (Giza)

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound . Make :Impermo/Roff/Cico

Material and labour for Rendering 10mm thick in CM 1:6 on brick surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc,complete all as specified and as directed..

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distember ovea a preparatory coat of 1mm thick wall care putty on wall on plastered surfacs of wall.complete all as specified and as directed

Material and labour for Complete removal of existing treatment on old walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete, all as specified and as directed

Material and labour for Complete removal of existing treatment on walls and applying two coats of oil bound distember ovea a preparatory coat of 1mm thick wall care putty on wall on plastered surfaces of wall including preparation of old plastered surfaces of wall complete all as specified and as directed

Material and labour for 10mm thick Rendering on fair faces of concrete surfaces in CM1:4 and finished the surfaces fair and even without extra cement complete all as specified and as directed

Material and labour for Preparation of old wooden painted surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed .

Material and labour for Preparation of new steel surfaces of any descripation over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Material and labour for Preparing surfaces of wood and wood based materials, new or old, of any description and treated with two coats of creosote oil complete all as specified and as directed.

Supply and fix in repairs 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Demolition of reinforced brickwork as in RCC tank over roof slab, etc. in cement mortar or cement concrete and removal of debris off the premises and scrap iron taken as credit complete all as specified and as directed .

Disconnecting existing tanks of capacity 500 litre to 1000 litre from water supply conections, setting aside (or lowering if required) for repairs, cleaning, etc. and rehoisting if required reconnecting and re-fixing in position etc, complete all as specified and as directed.

Dismantling and refixing of existing aluminium composit panel board 4mm thick as in cladding /bush board with aluminium frame work of size 35mm x 25mmx2mm thick aluminium section with necessary fittings and scaffolding etc complete all as specified and as directed.

Supply and laying of 25 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,etc including taking up or down steel tubing and connections, of any description and taken as credit complete all as specified and directed. Make : Ashirwad/Astral

Supply and laying of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,etc including taking up or down steel tubing and connections, of any description and taken as credit complete all as specified and directed. Make : Ashirwad/Astral

Material and labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor finishes, 50 mm thick etcincluding necessary steel form work complete all as specified and as directed.

Material and labour for Providing roof treatment with APP modified water proofing membrane with the following specificationscomplete all as specified and directed.

(a)Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris to a distance exc 50m but n exc 100m

(b)Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

(c)Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.2kg per Sqm & providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

Supply and fix in repairs 110 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince .

. Taking down old unserviceable submain wiring of aluminium conductor cable of sizes 2.5 , 4 ,6 and 10 sq.mm from the existing surfaces and taken as credit complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm nominal cross sectional area ,single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral in and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm nominal cross sectional area and connected to common earth dolly including provision of suitable size of modular metal box, fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

All as described in item No. 39 here in before but for One fanpoint exhaust fan point controlled by one switch and regulator

All as described in item No. 39 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 39 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 39 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Material and labour for Sub main wiring with 2 runs of single core ,1100 volts grade ,FRLS PVC insulated unsheathed multi-stranded copper conductor cable of size 2.50 Sq mm confirming to IS 694 drawn through and including rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling and Provision of one run of single core ,1100 volts grade , 2.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 2.50sqmm and one run of 2.50 sqmm and one PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells(iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single core ,1100 volts grade ,FRLS PVC insulated unsheathed multi-stranded copper conductor cable of size 4.0 Sq mm confirming to IS 694 drawn through and including rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling and Provision of one run of single core ,1100 volts grade , 4.0 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 4.0sqmm and one run of 4.0 sqmm and one PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells(iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . MAKE:Havells cat part no: PLUTONEO2X2PLR42WLED840S or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repair LED panel shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core PVC flexible copper conductor cable of suitable size complete all as specified and as directed.. Make : Havells/M/S Wipro/CG

Supply and fix LED spot light 9 Watt for fixing at target with suitable arrangement alongwith all accessories connecting up with twin core twisted PVC cable lamp from point to lamp complete all as specified and as directed . Note : Make:-AruSPARC LIGHTS LED WALL SPOT LIGHT with metallic body (9 watt ,white) or equivalent price and specification in Philips/Havells .

Supply and fix in repair Round shaped 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible PVC copper conductor cable of suitable size complete all as specified and as directed . Make : Havells Cat No EDGEPRONEORDDLR12WLED840S / M/S Wipro/CG

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make: Havells cat part no LHEXBXPNIN1W020: or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make: Havells cat part no LHEXBXPNIN1W010: or Equivalent price and specification in M/S Wipro/CG

Supply and fix Heavy Duty Wall mounting fan ,300 mm sweep voltage 230V, 50 Hz, single phase Copper winding and including making suitable arrangement for fixing the wall mounting fan i.e.,provision of suitable clamps for fixing to wall and making good the surface with existing surface and fixing arrangements and provision of 3 core flexible PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of wall mounting fan and removing unserviceable wall mounting fan and depositing into MES store complete all as specified and directed. Make : CG/Almonard/Khaitan

Supply and fix in repair LED security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed. Make: Havells cat part no :ENDURASUNDOWNSL25WLED765PASYBOPCIHD or Equivalent price and specification in M/S Wipro/CG

Taking down old unserviceable MCCB DBs/MCB DB including MCB/MCCB/Isolaters and taken as credit complete all as specified and as directed.

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoing including old unserviceable DB of any description and taken as credit complete all as specified and as directed. Note :Make : Indo Asian/ABB/L&T

Supply and fix MCCB 4 pole 100 Amps ,16KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed . Note :Make : Indo Asian/ABB/L&T

Supply and fix in repair MCB SPN 'C' curve 40 to 63 Amps, 240 volts, 50 Hz, 10 KA following poles and current carrying capacity in the MCB DB complete all as specified and directed.Note :Make : Indo Asian/L&T/Legrand

Supply and fxi MCB SP 240 Volt , 10 Ka ,C Curve , capacity 6 to 32 Amps complete all as specified and as directed. Make: Siemen/ABB/Legrand

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

M/s. N D KALING

SHRI.H.R.PATIL

M/s. KIRAN M CHOUGULE

ASHOK M RAJGOLKAR

M G KANADIKAR ENGINEERS AND CONTRACTORS

M/S MAHADEV M PATIL