Rate Contract for Purchase of Implants under RKS for Shri Vinoba Bhave Civil Hospital, Silvassa.

Rate Contract for Purchase of Implants: (A) Orthopedic Implants (1 to 570) (B) Maxiofacial Implants (571 to 629) (c) Neuro Surgical Implants (630 to 676)

Instrument Set for Lock Nail for Tibia with Dynamin Comp. Hole

Instrument Set for Lock Nail for Tibia with Expert Type

Lock Nail for Femur with Dynamin (Instrument Set)

Instrument set for Above Lock Nail for Femur

6.5mm Bioabsorbable(75% PLLA & 25% HA), screw in preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair - Should be USFDA Approved

TOTAL KNEE REPLACEMENT IMPLANTS CEMENTED ( Femoral Component Co.Cr - R/L, Sz. 1.5 / 2 / 2.5 / 3 / 4, Tibial Component Monoblock type Allpoly ( Material - Calcium Stearate Free Polyethylene) Sz. 1.5 / 2 / 2.5 / 3 / 4 x 8/10/12.5/15mm, Bone Cement CMW1 - 1Pkt, with Disposables : (1) Hip Drape (2) Cling Drape (3) Drape Large (4) Skin Stapler (5) Plain Sheet Large - 4 (6) Cautery Pencil

HA Coated Monoaxial Screw Titanium Ø5.5mm / 6.5mm x Length 25/30/35/40/45/50mm

HA Coated Polyaxial Screw Titanium Ø5.5mm, 6.5mm x Length 25/30/35/40/45/50mm

95° D.C.S. LOCKING PLATE 4.5/ 5mm - 6/8/10 Hole

95° D.C.S. LOCKING PLATE 4.5/ 5mm - 12/14/16 Hole

LOCKING C. C. SCREW 7.3 mm ( Fully Thread ) Length (With Head 105 mm To 120 mm

TITANIUM RICHARD D.H.S. BARREL LOCKING PLATECE & US FDA APPROVED 4.5/5mm -130° / 135° - 4 , 5 Hole

TIT RICHARD D.H.S. BARREL LOCKING PLATECE & US FDA APPROVED 4.5/5mm -130° / 135° - 6 , 8 Hole

TITANIUM RICHARD D.H.S. BARREL LOCKING PLATECE & US FDA APPROVED 4.5/5mm -130° / 135° - 10 , 12 Hole

TITANIUM 95° D.C.S. LOCKING PLATE CE & US FDA APPROVED 4.5mm - 6/8/10 Hole

TITANIUM 95° D.C.S. LOCKING PLATE CE & US FDA APPROVED 4.5mm - 12/14Hole

LAG SCREW 8.0MM 50 to 110 mm (5 mm Variation)

LAG SCREW 6.5MM 50 to 110 mm (5 mm Variation)

INTERLOCKING BOLT 6.0MM Dia. 6.0mm X 45 to 100 mm (5 mm Variation)

DFN NAIL - Dia - 9 / 10 / 11 / 12 x 150 to 350mm ( 50mm Veriation)

END CAP Titianuim 0 -5 - 10 -15 mm

Titanium Proximal Femeral Nail ANTIROTATION Long 130° with Distal - 4.5mm Cortical Locking Screw and Proximal Blade ( 70mm to 120mm - 5mm Veriation) - Right / Left - 9 / 10 / 11 / 12mm Dia. - Length - 34 to 46cm ( 2 Cm Veriation)

Titanium Proximal Femeral Nail ANTIROTATION Short - 130° with Distal - 4.5mm Cortical Locking Screw and Proximal Blade ( 70mm to 120mm - 5mm Veriation) - 9 / 10 / 11 / 12mm Dia. - Length - 24cm

Titanium Lock Nail for Femur with Proximal 4 Holes (One Dynamin Comp. Hole and One Static Hole, 2 Oblique Hole for Neck ) and One Lockig from out of Nail and Distal 2 Static Static Hole & 1 Dynamic Hole, Right / Left - Dia. 9/10/11/12mm, Length 36cm to 48mm ( 2 Cm Veriation)

Instrument set for Above Lock Nail for Femur

Instrument Set for Lock Nail for Tibia with Dynamin Comp. Hole

Instrument Set for Lock Nail for Tibia with Expert Type

Lock Nail for Femur with Dynamin (Instrument Set)

Bone Cement - Medium Viscocity 40g

Bone Cement - High Viscocity 40g

Bone Cement - High Viscocity 20g with Genta

Bone Cement - High Viscocity 40g with Genta

Cement Restrictor

Vertebral body augmentation system - Kit should be US FDA approved , Pre-sterile, should have working cannulas with inner diameter of 3.2 mm or less , outer diameter 4.2 mm or more with calibration with cm/ mm marking on proximal end, along with cannulated obturator.should have digital battery operated inflation syringe to inflate balloon showing pressure in PSI & ATM, inflation time and volume of cavity created in Vertebral body.The inflatable balloon tamps size - 10/3, 15/3, 20/3(either size) should be capable to bear pressure of 400 psi or more to elevate vertebral body.The bone filling

Vertebral body augmentation system - device should be calibrated and should contain minimum 1.5cc of volume.Should have curette for scrapping bone in old VCF with variable angles 30, 60, 90 degree to create cavity in vertebral body. The biopsy needle should have cm marking on proximal side to take adequate bone biopsy Minimally invasive, percutaneous, Balloon Kyphoplasty system for stabilizing VCFs FDA approved Inflatable Bone Tamps for use during Balloon Kyphoplasty with high radio- viscosity

6.5mm Bioabsorbable(75% PLLA & 25% HA), screw in preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair - Should be USFDA Approved

BONE SUBSTITUTES 5 cc Paste Rapid Cure,Recystallised Calcium Sulfate,herkristalliseerd caliumsulfaat,sulfate de calcium recristallise,

HA Coated Monoaxial Screw Titanium Ø5.5mm / 6.5mm x Length 25/30/35/40/45/50mm

HA Coated Polyaxial Screw Titanium Ø5.5mm, 6.5mm x Length 25/30/35/40/45/50mm

Shoulder stabilization instruments for SLAP/BANKART/ROTATOR CUFF ISO 9001-2008, ISO 13485-2003, CE, US- FDAShoulder stablization Arthroscopic hand instruments having state of art quality, durability, precise tactile feel & an extremely low profile tip .It should have EDM manufacturing technology with 455 grade carbon stainless steel to ensure maximum durability. The instrument should have following features.

15. Disposble suture grasper device with inbuilt loop 15,30,45,60 deg —1 no each

16. Multi functional Suture passer device for one handed operation to pass 1 suture through rotator cuff with low profile design(16mm) to pass through 5.5mm cannula—01no

Disposable Threaded Clear Cannula with Obturator - Dia. 5.5mm, Length 75mm CE Class1 and Class 2B, ISO 13484- 2003, GMP,SSI,CSPO,NSIC, FDA

Disposable Threaded Clear Cannula with Obturator - Dia. 8.5mm, Length 75mm CE Class1 and Class 2B, ISO 13484- 2003, GMP,SSI,CSPO,NSIC, FDA

Disposable Blade for Shaver Machien CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Polyester Green Coated Braided Non Absorbable 4X75cm- 55mm-1/2-Tapercut Size-5 CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Polyester Green Coated Braided Non Absorbable 55mm-1/2- Tapercut Size-2 CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Threaded tab End cap PEEK & Titanium Anchor on a shaft versalok Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

TwifixTI-2.8mm Ultra braid for Suture Anchor Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

TwifixTI-5.0mm Ultra braid for Suture Anchor Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Disposable Irrigation for Endoscopic Set Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Electrode 90 deg. Suction with Integrated Hand piece CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Modified hydroxylapatite – combination of HA 40% and bita TCP is 60% .It consist of nano crystalline agglomerates . 5 nos

Modified hydroxylapatite – combination of HA 40% and bita TCP is 60% .It consist of nanocrystalline agglomerates . 20nos

LEVEL 4 PROTECTION FOR SURGERYIN HIP AREA WITH .SPUN LACE FABRIC WATER REPELLENT WITH 2 PART DESIGN

ARHOSCOPY DRAPE . SPUN FABRIC WATER REPELLENT SIZE 180*150 CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 10.5*30CM PAD SIZE 4*26CM

Burn Mesh .Size 25*50

Burn Mesh .Size 25*30

Burn Mesh .Size 25*15

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*150 CM ,4 SIDE STICKING

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*210 CM ,4 SIDE STICKING

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*66CM,4 SIDE STICKING

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 90*25 CM .ADHESIVE AREA 60*25 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 50*25 CM .ADHESIVE AREA 30*25 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 60*35 CM .ADHESIVE AREA 35*35 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 90*45 CM .ADHESIVE AREA 60*45 CM

Arthoscopey Disposable Cannula Trocar Point-8.25X70mm Green

Arthoscopey Disposable Cannula Trocar Point-8.25X90mm Red

Arthoscopey Super Refix-Suture Anchor 5.0mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-Refix-Suture Anchor 5.0mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-Refix-Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Micro-Refix -Suture Anchor 2.4mm, Titanium (loaded with one pc UFiber with needle)

Arthoscopey Super-Solaris-Dual Thread Suture Anchor 5.0mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-Solaris-Dual Thread Suture Anchor 5.0mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-Solaris-Dual Thread Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Mini-Solaris-Dual Thread Suture Anchor 2.8mm, Titanium (loaded with one pc UFiber with needle)

Arthoscopey Mini-Solaris-Dual Thread Suture Anchor 3.5mm, Titanium (loaded with one pc UFiber with needle)

Arthoscopey Super-Solaris-Dual Thread Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2 with needle)

Arthoscopey Mini-AtnoX-Suture Anchor 2.8mm, Titanium (loaded with one pc UFiber)

Arthoscopey Mini-AtnoX-Suture Anchor 3.5mm, Titanium (loaded with one pc UFiber)

Arthoscopey Super-AtnoX-Suture Anchor 5.0mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 5.0mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 5.0mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 5.0mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with three pc UFiber #2)

Arthoscopey Mini-AtnoX-Suture Anchor 2.8mm, Titanium (loaded with one pc UFiber with needle)

Arthoscopey Mini-AtnoX-Suture Anchor 3.5mm, Titanium (loaded with one pc UFiber with needle)

Arthoscopey Super-AtnoX-Suture Anchor 5.0mm, Titanium (loaded with two pc UFiber #2 with needle)

Arthoscopey Super-AtnoX-Suture Anchor 6.5mm, Titanium (loaded with two pc UFiber #2 with needle)

Arthoscopey Mini-Protoza-Suture Anchor 2.8mm, PEEK (loaded with one pc UFiber)

Arthoscopey Mini-Protoza-Suture Anchor 3.0mm, PEEK (loaded with two pc UFiber)

Arthoscopey Mini-Protoza-Suture Anchor 3.5mm, PEEK (loaded with two pc UFiber)

Arthoscopey Solaris-PK-Suture Anchor 5.5mm, PEEK (loaded with two pc UFiber)

Arthoscopey Mini-NotLien-Push-In Suture anchor PEEK, Knotless 2.8mm

Arthoscopey Super-NotLien-Push-In Suture anchor PEEK, Knotless4.5mm

Arthoscopey NotLien-LR-Suture anchor PEEK, Knotless 4.75mm, PEEK Tip

Arthoscopey NotLien-LR-Suture anchor PEEK, Knotless 4.75mm, Titanium Tip

Arthoscopey NotLien-LR-Suture anchor PEEK, Knotless 5.5mm, PEEK Tip

Arthoscopey NotLien-LR-Suture anchor PEEK, Knotless 5.5mm, Titanium Tip

PERIARTICULAR PROXIMAL HUMERUS LOCKING PLATE (LEFT / RIGHT ) STAINLESS STEEL 2 / 4 / 6 / 8 / 10 / 12 / 14 Hole & Locking Screw with Cortical Screw

PERIARTICULAR PROXIMAL HUMERUS LOCKING PLATE (LEFT / RIGHT ) TITANIUM 2 / 4 / 6 / 8 / 10 / 12 / 14 Hole & Locking Screw with Cortical Screw

GREATER TROCHANTER REATTACHMENT DEVICE SHORT - 23 X 53MM

GREATER TROCHANTER REATTACHMENT DEVICE LONG - 23 X 121MM

GREATER TROCHANTER REATTACHMENT DEVICE EXTENDED 4 HOLE - 23 X 232MM

GREATER TROCHANTER REATTACHMENT DEVICE EXTENDED 5 HOLE - 23 X 261MM

CABLE FOR GTR DEVICE, COBALT-CHROME 1.8 X 635MM

CABLE ASSEMBLY W/CERCLAGE CRIMP, 1.8 X 635MM

3.5MM CLAVICAL HOOK PLATE (LEFT / RIGHT ) STAINLESS STEEL 4 / 5 / 6 / 7 Hole & Locking Screw with Cortical Screw

VADR TWO COLUMB LOCKING PLATE 2.4/2.7 MM ( LEFT / RIGHT ) TITANIUM 2-3-4-5 Hole & Locking Screw with Cortical Screw

Variable Locking Screw Titanium Extra Articular Distal Humerus Locking Plate V.A 5/3 Hole & 5/5 Hole With Locking Screw & Cortical Screw

Variable Angle Locking Screw (Tit) Posterior Distal Tibia LCP ( Variable Angle) (5 Hole,7 Hole,9 Hole,11 Hole, 13 Hole) With Locking Screw & Cortical Screw

Titanium Distal Femur Locking Plate ( Variable Angle) 5 Hole, 7 Hole 9 Hole, 11 Hole, 13 Hole With Locking Screw & Cortical Screw

Titanium Shaft Clavicular Plate 3.5mm ( Variable Angle) 3 Hole,4 Hole,5 H,6 H,7 H,8 Hole) With Locking Screw & Cortical Screw

(TIT) Locking Lateral Clavicular Plate ( Variable Angle) 3 Hole,4 Hole,5 H,6 H,7 H,8 Hole With Locking Screw & Cortical Screw

Titanium Distal Medial Tibia LCP ( Variable Angle) 4 H, 6 H, 8 Hole 10 Hole, 12 Hole With Locking Screw & Cortical Screw

DHS Plate (Long Barrel/Short )TIT (4 H 5 H, 6Hole) with DHS Screw (Bolt) TIT & 4.5mm Cortical Screw TIT

Arthoscopey Ligament Anchor, PEEK loaded with 2 pc Fiber with needle, Dia. 5.5mm

Arthoscopey Ligament Anchor, PEEK loaded with 2 pc Fiber with needle, Dia. 4.5mm

DISTAL MEDIAL FEMORAL PLATE WITH LOCKING SYSTEM LEFT / RIGHT STAINLESS STEEL 5 Hole 7 hole 9 hole 11 hole 13 hole 15 hole With Locking Screw & Cortical Screw

DISTAL MEDIAL FEMORAL PLATE WITH LOCKING SYSTEM LEFT / RIGHT (TITANIUM) 5 Hole 7 hole 9 hole 11 hole 13 hole 15 hole With Locking Screw & Cortical Screw

PERFECT TIBIA NAILS CANNULATED (STAINLESS STEEL) Left/Right DIA. 8 / 9 /10 / 11 /12 mm X 255 TO 375MM Size (15MM VARIATION) With Locking Screw

PERFECT FEMER NAILS CANNULATED (STAINLESS STEEL) Left/Right DIA. 8 / 9 /10 / 11 /12 mm X 255 TO 375MM Size (15MM VARIATION) With Locking Screw

PERFECT TIBIA NAILS CANNULATED (TITANIUM) Left/Right DIA. 8 / 9 /10 / 11 /12 mm X 255 TO 375MM Size (15MM VARIATION) With Locking Screw

PERFECT FEMER NAILS CANNULATED (TITANIUM)Left/Right DIA. 8 / 9 /10 / 11 /12 mm X 255 TO 375MM Size (15MM VARIATION) With Locking Screw

PROXIMAL TIBIAL LOCKING PLATE ZIMER TYPE 3.5 mm (LEFT/RIGHT) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

3.5/4.5MM DISTAL MEDIAL TIBIA LOCKING PLATE (LEFT/RIGHT) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

PROXIMAL TIBIAL LOCKING PLATE ZIMER TYPE 3.5 mm (LEFT/RIGHT) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

3.5/4.5MM DISTAL MEDIAL TIBIA LOCKING PLATE (LEFT/RIGHT) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

PROXIMAL LATERAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

PROXIMAL LATERAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

PROXIMAL MEDIAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

PROXIMAL MEDIAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

DISTAL MEDIAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE (Zimmer Type) 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

DISTAL MEDIAL TIBIA LOCKING PLATE 3.5 MM LEFT/RIGHT EACH SIZE (Zimmer Type) 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

PHMA LOCKING PLATE (PROXIMAL HUMERUS MULTI ANGLE) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw (TITANIUM)

PHMA LOCKING PLATE (PROXIMAL HUMERUS MULTI ANGLE) EACH SIZE 4HOLE,6HOLE,8HOLE,10HOLE,12HOLE,14HOLE With Locking Screw & Cortical Screw ( S S )

PROXIMAL FEMORAL ANTIROTATION DIA.9/10/11/12 SHORT NAIL (STAINLESS STEEL) SHORT NAIL LENGTH - 180MM & 240MM SPIRAL BLEAD FOR PFN NAIL (STAINLESS STEEL) 70 TO 120 MM With Locking Screw

PROXIMAL FEMORAL ANTIROTATION DIA.9/10/11/12 LONG NAIL (STAINLESS STEEL) RIGHT / LEFT DIA. 9MM X 340 TO 440MM (20MM VARIATION) DIA. 10MM X 340 TO 440MM(20MM VARIATION) DIA. 11MM X 340 TO 440MM (20MM VARIATION) DIA. 12MM X 340 TO 440MM (20MM VARIATION) SPIRAL BLEAD FOR PFN NAIL (STAINLESS STEEL) 70 TO 120 MM With Locking Screw

MALLEOLAR SCR 4.5XL 14 TPI 20-80mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 3mm X 15mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 3mm X 17.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 3mm X 20mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 3mm X 22.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 3mm X 25mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 8mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 10mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 12.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 15mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 17.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 20mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 22.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 4mm X 25mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 8mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 10mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 12.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 15mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 17.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 20mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 22.5mm

Insert : Poly fixed bearing insert should have 5 locking points on tibial base plate Revision Tibia Fixed Bearing Insert 5mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 1.5mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 2.5mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 3mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 4mm X 25mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 8mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 10mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 12.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 15mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 17.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 20mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 22.5mm

Insert : Poly Rotating Platform gliding surface, Size of Revision Tibia Rotating Platform Insert 5mm X 25mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 1.5mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 2mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 2.5mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 3 mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 4 mm

Titanium Modular Tibial Tray: should accommodate Extension rod, step wedges Material : Titanium Alloy, Revision Modular Tibia Size 5mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm, Size 1.5-10mm, 15mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm, Size 2-10mm, 15mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm, Size 2.5-10mm, 15mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm, Size 3-10mm, 15mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm, Size 4-10mm, 15mm

Step Wedge for Revision Modular Tibia: Wedge should fit right & left side of the Tibia, should be accommodate with lateral & medial tibial platu, It should be step wedge 10mm & 15mm Size, Size 5-10mm, 15mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 1.5-4mm, 8mm, 12mm, 16mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 2-4mm, 8mm, 12mm, 16mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 2.5-4mm, 8mm, 12mm, 16mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 3-4mm, 8mm, 12mm, 16mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 4-4mm, 8mm, 12mm, 16mm

Distal Augment: should cover up to 16mm of bone defect, it should have right & left option, fit without cement with femoral component, Size 5-4mm, 8mm, 12mm, 16mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 1.5-4mm, 8mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 2-4mm, 8mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 2.5-4mm, 8mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 3-4mm, 8mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 4-4mm, 8mm

Posterior Augment: should cover up to 8mm of bone defect, it should be universal option, fit without cement with femoral component, Size 5-4mm, 8mm

Femoral Bolt: To help to fit femoral Extension rod with femoral component with 0 offset

Femoral Bolt: To help to fit femoral Extension rod with femoral component with +/-2 offset

Femoral Extension rod: Uncemented femoral Extension rod should have universal 5® & 7® valgus angle & femoral Extension rod should have inbuilt adapter, with 2 length 125mm & 175mm in different Dia Size 5® 125mm - 10mm, 12mm, 14mm, 16mm, 18mm

Femoral Extension rod: Uncemented femoral Extension rod should have universal 5® & 7® valgus angle & femoral Extension rod should have inbuilt adapter, with 2 length 125mm & 175mm in different Dia Size 5® 175mm - 10mm, 12mm, 14mm, 16mm, 18mm

Femoral Extension rod: Uncemented femoral Extension rod should have universal 5® & 7® valgus angle & femoral Extension rod should have inbuilt adapter, with 2 length 125mm & 175mm in different Dia Size 7® 125mm - 10mm, 12mm, 14mm, 16mm, 18mm

Femoral Extension rod: Uncemented femoral Extension rod should have universal 5® & 7® valgus angle & femoral Extension rod should have inbuilt adapter, with 2 length 125mm & 175mm in different Dia Size 7® 175mm - 10mm, 12mm, 14mm, 16mm, 18mm

Cemented Femoral Extension rod: Cemented femoral Extension rod with universal 5® & 7® valgus angle & inbuilt adapter, with 2 length 90mm & 130mm in different Dia Size 5® 90mm - 10mm, 12mm, 14mm, 16mm, 18mm

Cemented Femoral Extension rod: Cemented femoral Extension rod with universal 5® & 7® valgus angle & inbuilt adapter, with 2 length 90mm & 130mm in different Dia Size 5® 130mm - 10mm, 12mm, 14mm, 16mm, 18mm

Cemented Femoral Extension rod: Cemented femoral Extension rod with universal 5® & 7® valgus angle & inbuilt adapter, with 2 length 90mm & 130mm in different Dia Size 7® 90mm - 10mm, 12mm, 14mm, 16mm, 18mm

Cemented Femoral Extension rod: Cemented femoral Extension rod with universal 5® & 7® valgus angle & inbuilt adapter, with 2 length 90mm & 130mm in different Dia Size 7® 130mm - 10mm, 12mm, 14mm, 16mm, 18mm

Tibial Extension rod: Uncemented tibial Extension rod should be universal for right & left, should have 3 different length option & have flutes on it for rotational stability, Size 75mm - 10mm, 12mm, 14mm, 16mm, 18mm

Tibial Extension rod: Uncemented tibial Extension rod should be universal for right & left, should have 3 different length option & have flutes on it for rotational stability, Size 115mm - 10mm, 12mm, 14mm, 16mm, 18mm

Tibial Extension rod: Uncemented tibial Extension rod should be universal for right & left, should have 3 different length option & have flutes on it for rotational stability, Size 150mm - 10mm, 12mm, 14mm, 16mm, 18mm

Tibial Extension rod : Cemented tibial Extension rod universal for right & left, should have 2 different length option, Size 30mm - 13mm, 15mm

Tibial Extension rod : Cemented tibial Extension rod universal for right & left, should have 2 different length option, Size 60mm - 13mm, 15mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 1.5 mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 2 mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 2.5 mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 3 mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 4 mm

Rotating Revision Tray: Cobalt Chromium, Tray thickness should be more than 4.8mm, could be used with sleeves and / or wedges, tibia base plate should have base cap. Modular plus revision rotating platform tibial tray Size 5 mm

Metaphysial Sleeve : Fits with revision rotating platform tray, Titanium alloy construction with porous coating covers the proximal third of the sleeve, sleeve should have 20® internal or external rotation, any size sleeve may be used with any size tray,

Metaphysial Sleeve : Fits with revision rotating platform tray, Titanium alloy construction with porous coating covers the proximal third of the sleeve, sleeve should have 20® internal or external rotation, any size sleeve may be used with any size tray,

Metaphysial Sleeve : Fits with revision rotating platform tray, Titanium alloy construction with porous coating covers the proximal third of the sleeve, sleeve should have 20® internal or external rotation, any size sleeve may be used with any size tray,

Metaphysial Sleeve : Fits with revision rotating platform tray, Titanium alloy construction with porous coating covers the proximal third of the sleeve, sleeve should have 20® internal or external rotation, any size sleeve may be used with any size tray,

Metaphysial Sleeve : Fits with revision rotating platform tray, Titanium alloy construction with porous coating covers the proximal third of the sleeve, sleeve should have 20® internal or external rotation, any size sleeve may be used with any size tray,

Universal Femoral Sleeves: Titanium Construction, Two option distally porous and fully porous. Compatible with all type of primary & revision component, porous coating should cover the distal third of the distally porous sleeve. Steps are larger on the di

Universal Femoral Sleeves: Titanium Construction, Two option distally porous and fully porous. Compatible with all type of primary & revision component, porous coating should cover the distal third of the distally porous sleeve. Steps are larger on the di

Universal Femoral Sleeves: Titanium Construction, Two option distally porous and fully porous. Compatible with all type of primary & revision component, porous coating should cover the distal third of the distally porous sleeve. Steps are larger on the di

Universal Femoral Sleeves: Titanium Construction, Two option distally porous and fully porous. Compatible with all type of primary & revision component, porous coating should cover the distal third of the distally porous sleeve. Steps are larger on the di

Universal Femoral Sleeves: Titanium Construction, Two option distally porous and fully porous. Compatible with all type of primary & revision component, porous coating should cover the distal third of the distally porous sleeve. Steps are larger on the di

Universal Femoral Adapter: With 5® valgus angle with right & left mark on it, which allows to fit femoral sleeve to femoral component

Universal Femoral Adapter: With 7® valgus angle with right & left mark on it, which allows to fit femoral sleeve to femoral component

Femoral Adapter Bolt : Which help to fit femur with femoral adopter comes with 0 offset

Femoral Adapter Bolt : Which help to fit femur with femoral adopter comes with +/-2 offset

Mobile bearing tibia should be made of cobalt crome, it should be compatible with primary femur component, it should have 4mm cobalt crome metal thikness & should be highly polished. It should not have any locking mechanisum of insert, back side of tibia

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 6 - Length 115mm neck option 30mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 7 - Length 115mm neck option 30mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 8 - Length 130mm neck option 30mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 9 - Length 130mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 11 - Length 150mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 13 - Length 160mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 15 - Length 165mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Short Revision Stem Size 17 - Length 165mm neck option 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Long Revision Stem Size 9 - Length 205mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Long Revision Stem Size 11 - Length 205mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Long Revision Stem Size 13 - Length 215mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Long Revision Stem Size 15 - Length 225mm neck option 30, 36, 42mm

Wrought titanium alloy Modular Primary/Revision Uncemented Stem : with 11/13 neck taper which has independent neck positioning and enable proximal sleeve to place in the best possible bone stock while also adjusting the sleeve's size for optimal fit and fill. Stem should have distal flute and coronal slot for rotational stability. Long Revision Stem Size 17 - Length 230mm neck option 36, 42mm

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 3mm thickness - Sleeve 12B small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 5mm thickness - Sleeve 12D small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 3mm thickness - Sleeve 14B small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 5mm thickness - Sleeve 14D small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 7mm thickness - Sleeve 14F small, Large, Extra Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 3mm thickness - Sleeve 16B small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 5mm thickness - Sleeve 16D small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 7mm thickness - Sleeve 16F small, Large, Extra Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 3mm thickness - Sleeve 18B small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 5mm thickness - Sleeve 18D small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 7mm thickness - Sleeve 18F small, Large, Extra Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 3mm thickness - Sleeve 20B small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 5mm thickness - Sleeve 20D small, Large

Porous coated tapered con shaped Modular Primary/Revision Uncemented Sleeve : to accomodate modular primary / revision stem for optimal fit and fill of metaphyseal area and with 7mm thickness - Sleeve 20F small, Large, Extra Large

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 10.5mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 12mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 13.5mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 15mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 16.5mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 18mm Dia X 8'' Straight

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 13.5mm Dia X 9'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 15mm Dia X 9'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 16.5mm Dia X 9'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 18mm Dia X 9'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 13.5mm Dia X 9'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 15mm Dia X 9'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 16.5mm Dia X 9'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 18mm Dia X 9'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 13.5mm Dia X 10'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 15mm Dia X 10'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 16.5mm Dia X 10'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 18mm Dia X 10'' Right

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 13.5mm Dia X 10'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 15mm Dia X 10'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 16.5mm Dia X 10'' Left

Uncemented Revision Stem - Distal fixation with porous coating, using Cobalt chrome alloy, Porous coating, should be scratch-fit for intial stability, should be available in straight, bowed, and calcar stems, 10.5 - 18mm stem diameters, Stem 12/14 Taper, Polished distal tip. Uncemented revision Stem Size 18mm Dia X 10'' Left

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Trochanteric Components Collared 25mm X 26mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Trochanteric Components Collared 35mm X 26mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Trochanteric Components Collarless 25mm X 26mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Trochanteric Components Collarless 35mm X 26mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 12mm Length 225mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 12mm Length 275mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 14mm Length 225mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 14mm Length 275mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 16mm Length 225mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 16mm Length 275mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 18mm Length 225mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Distal Stem Dia 18mm Length 275mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 25mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 30mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 35mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 40mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 45mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 50mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 55mm

Uncemented Revision Stem with distal screw - Distal press fit facilitated by distal interlocking screws, made of Titanium , Metaphyseal- Diaphyseal Stem, Stem should have option in two part proximal and distal, Stem should have option to change version after fixing distal part, Stem 12/14 taper, should be Available in two heights and two version with or without collar, Trochanteric Wing- coated with hydroxyapatite and secured to the trochanter, diameters: 10, 12, 14,16,18 mm, Distal Screws : Lengths from - 20 mm to 80 mm in 5 mm, Screw for distal locking 60mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 40mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 42mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 44mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 46mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 48mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 50mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 52mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 54mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 56mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 58mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 60mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 62mm

Uncemented Multihole Revision Cup - The dome geometry should be 180 degrees - a complete hemisphere, Material: Titanium alloy, Porous Coating, Coating Thickness should be 0.8mm, Dome Thickness Range - 3.1mm to 6mm, Degree Taper -10 Degree, Multihole, Locking Mechanism - Variable Interface Prosthesis Taper at 10Degree, upto 12 Anti Rotational Device Slots on the Rim, Uncemented Multihole Revision Cup Size 64mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 54mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 56mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 58mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 60mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 62mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 64mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 66mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 68mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Revision Uncemented Cup with peripheral screws 70mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Peripheral locking screw for standard profile uncemented Cup 20mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Peripheral locking screw for standard profile uncemented Cup 25mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Peripheral locking screw for standard profile uncemented Cup 30mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Peripheral locking screw for standard profile uncemented Cup 35mm

Revision Standard Profile Acetabular Cup - Shell profile 180 degrees, Material: Titanium alloy, Dome holes offer 34 degree screw angulation, Porous Coating, Multiple peripheral and dome screw holes for immediate fixation. Peripheral locking screw for standard profile uncemented Cup 40mm

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Protrusio Cage - It should be made of Pure Titanium . Thus able to modify to fit patient anatomy. for Right & Left acetabulum there should be different option available. Multiple screw option should be available for Acetabulum Dome, Ilium or Ischium. Prot

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove fo

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove for easy head insertion, Size 32 X 60mm

Constrained Liner - Constrained liner should have Titanium locking ring to secure hold & minimize potential disassemble of inner Head, Large Internal diameter to maximize more then 110 Degree Range of Motion, Constrained liner should have flex groove for easy head insertion, Size 32 X 62mm

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 50/52 x 10

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 54/56 x 10

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 58/60 x 10

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 62/64 x 10

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 50/52 x 15

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 54/56 x 15

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 58/60 x 15

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 62/64 x 15

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 50/52 x 20

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 54/56 x 20

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 58/60 x 20

Compromised Acetabular Gap filling Augments : Acetabular bone defect or bone loss Augments, Augment should be design to act as a defect filling implants in the case of bone loss in the acetabulum, Augment should be made of completely porous structure from pure titanium, Augment should be fixed with screws or cement. Augment size 62/64 x 20

Cementless Accetabular Component – Ceramic Liner 32mm x 48mm Composition material : Biolox Delta Ceramax Diameter – 48mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Cementless Accetabular Component – Ceramic Liner 32mm x 50mm Composition material : Biolox Delta Ceramax Diameter – 50mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Cementless Accetabular Component – Ceramic Liner 36mm x 52mm Composition material : Biolox Delta Ceramax Diameter – 52mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Cementless Accetabular Component – Ceramic Liner 36mm x 54mm Composition material : Biolox Delta Ceramax Diameter – 54mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Cementless Accetabular Component – Ceramic Liner 36mm x 56mm Composition material : Biolox Delta Ceramax Diameter – 56mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Cementless Accetabular Component – Ceramic Liner 36mm x 58mm Composition material : Biolox Delta Ceramax Diameter – 58mm Compatible with 32mm Head and corresponding to metal shell and pressfit with metal shell The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Head – Biolox Delta Ceramic 12/14 Tapered - 36mm x + 5mm Metal – Biolox Delta Ceramic Tapered - 12mm/14 mm Head Diameter – 36mm Neck Length – +5 mm & Cementless Total Hip Femoral stemp 10 mm The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

Head – Biolox Delta Ceramic 12/14 Tapered - 36mm x + 8.5mm Metal – Biolox Delta Ceramic Tapered - 12mm/14 mm Head Diameter – 36mm Neck Length – + 8.5 mm & Cementless Total Hip Femoral stemp 11 mm The Company Should have ISO 13485 : 2003 ,Quality Management System Certificate. The Company Should be USFDA & CE Certificate

GeneX ( Proprietory Item ) Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPC in a kit 5cc & 10cc

GeneX ( Proprietory Item ) Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPC in a kit 10cc

GeneX ( Proprietory Item ) Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPC in a kit 2.5 cc

Synthetic Recrystallised Hemihydrate Calcium Sulphate Kit to Prepare Antibiotic Impregnated Resorbable Pellets for delivery of antibiotics locally Stimulan Rapid Cure ( Proprietory Item ) 5cc

Synthetic Recrystallised Hemihydrate Calcium Sulphate Kit to Prepare Antibiotic Impregnated Resorbable Pellets for delivery of antibiotics locally Stimulan Rapid Cure ( Proprietory Item ) 5cc , 10cc

Synthetic Recrystallised Hemihydrate Calcium Sulphate Kit to Prepare Antibiotic Impregnated Resorbable Pellets for delivery of antibiotics locally Stimulan Rapid Cure ( Proprietory Item ) 20cc

Synthetic Beta-tricalcium Phosphate Fully Resorbable granules of average Particle size 2mm / 5cc & 10cc

Synthetic Beta-tricalcium Phosphate Fully Resorbable granules of average Particle size 2mm / 10cc

RAIL 240MM

RAIL 300MM

RAIL 400MM

CENTRAL CLAMP

SWIVEL CLAMP

T CLAMP

END CLAMP

CD UNIT 40MM

CD UNIT 80MM

TAPPERED S.SCREW

TIBIAL POST fixation screw,dia.6.5mm,len.30mm,Ti, Sterile

STAYFIX Spiked ligament staple,size small,Ti, Sterile

STAYFIX Spiked ligament staple,size large,Ti, Sterile

FIXWELLCannulated Cross pin,len.50mm,Ti, Sterile

SUTUREFIX Tibial base plate,round hole,Ti, Sterile

SUTUREFIX Tibial base plate, D- hole,Ti, Sterile

TIT ENDO BUTTON TITANIUM

TIT SUTURE DISK Double Hole , Slotted TITANIUM

TIT ANCHOR SCREW ( CORCK SCREW ) Dia. 3 mm & 5 mm TITANIUM

TIT LIGAMENT STAPPLE U SHAPE Dia, 8 mm, 10 mm TITANIUM

TIT SUTURE POST Dia. 6.5 mm Size 25, 30, 35 mm TITANIUM

TIT LIGAMENT WASHER MULTI SPIKE Dia. 19 mm X 6 mm, 16 mm x 5 mm TITANIUM

Violet Braided Composite Suture, Needle MO-7 22mm 1/2 C Taper CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Disposable Blade for Shaver Machien CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Polyester Green Coated Braided Non Absorbable 4X75cm- 55mm-1/2-Tapercut Size-5 CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Polyester Green Coated Braided Non Absorbable 55mm-1/2- Tapercut Size-2 CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Threaded tab End cap PEEK & Titanium Anchor on a shaftversalok Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

TwifixTI-2.8mm Ultra braid for Suture Anchor Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

TwifixTI-5.0mm Ultra braid for Suture Anchor Disposable CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC,FDA

Arthoscope Cannula & Obturator USA FDA with Stainless steel construction to withstand sterilization modalities & 6.0mm diameter sheath, high flow diagnostic cannula, double valve Fully rotatable cannula with fenestrated tip & 4.5mm conical Obturator to fit in 6.0mm cannula.

Endo Button CL / Ultra 15mm with Bouton de fixation avec suture en boucle continue de 15mm bottone di fissaggio sutura a cappio continuo da 15mm fixtion noop met dooriopende lushechfing button de fijaction con suture en blucle contionc fixationknapp med kontnuering surfurslynga filseetingsknapp med sutur med sammenhengende lekka CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Endo Button CL / Ultra 20mm with Bouton de fixation avec suture en boucle continue de 20mm bottone di fissaggio sutura a cappio continuo da 20mm fixtion noop met dooriopende lushechfing button de fijaction con suture en blucle contionc fixationknapp med kontnuering surfurslynga filseetingsknapp med sutur med sammenhengende lekka CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Endo Button CL / Ultra 25mm with Bouton de fixation avec suture en boucle continue de 25mm bottone di fissaggio sutura a cappio continuo da 25mm fixtion noop met dooriopende lushechfing button de fijaction con suture en blucle contionc fixationknapp med kontnuering surfurslynga filseetingsknapp med sutur med sammenhengende lekka CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Endo Button CL / Ultra 30mm with Bouton de fixation avec suture en boucle continue de 30mm bottone di fissaggio sutura a cappio continuo da 30mm fixtion noop met dooriopende lushechfing button de fijaction con suture en blucle contionc fixationknapp med kontnuering surfurslynga filseetingsknapp med sutur med sammenhengende lekka CE Class1 and Class 2B, ISO 13484-2003, GMP,SSI,CSPO,NSIC, FDA

Granules:- composition should be 85% Beta Tricalcium Phosphate and 15 % Hydroxyapatite, resorbable and polyporous, resorption should be controlled, porosity should be 80%, average pore size 500 micron, average interconnected diameter 125 microns, res

Granules:- composition should be 85% Beta Tricalcium Phosphate and 15 % Hydroxyapatite, resorbable and polyporous, resorption should be controlled, porosity should be 80%, average pore size 500 micron, average interconnected diameter 125 microns, res

Percutaneous Injectable Paste:- Bone paste should be ready to use,filled in sterile syringe and easy to use percutaneous method with 2 mm needle with osteoconductive properties that fascilitate new bone formation and bone healing, should be resorbable hyd

Percutaneous Injectable Paste:- Bone paste should be ready to use,filled in sterile syringe and easy to use percutaneous method with 2 mm needle with osteoconductive properties that fascilitate new bone formation and bone healing, should be resorbable hyd

Percutaneous Injectable Paste:- Bone paste should be ready to use,filled in sterile syringe and easy to use percutaneous method with 2 mm needle with osteoconductive properties that fascilitate new bone formation and bone healing, should be resorbable hyd

GOWN AND LEG COVER ARE MADE OF AHLSTORM BREATHABLE VIRAL BARRIER FABRIC HEAD COVER IS MADE OF SPUN LACE FABRIC

LAMINO SPINAL DRAPE . SPUN LACE FABRIC WATER REPELLENT . INCISE SIZE . 15*35 CM .SHEET SIZE 1.5*3 M

TRANSPERENT NATURAL COLOUR CLING FILM .SIZE 15*500CM

ADHESIVE COATED WHITE COLOUR ,NON WOVEN SPUN LACE PERFOTATED 100% POLY ESTER OF 48 GSM .10CM *250 CM

C ARM COVER IN 2 PIECES TRANSPERENT NATURAL COLOUR COVER

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 6*5 CM PAD SIZE 3*2 CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 10.5*20CM PAD SIZE 4*16 CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 10.5*25 CM PAD SIZE 4*21CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 8.5*6.5CM PAD SIZE 3*5CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 7*14CM PAD SIZE 3*10CM

NON WOVEN PP SMS 25 GSM .NON STICK WOUND PAD .100%PP BASE NON WOVEN PAD LAMINATED WITH POLYMER MEST 180 GSM SIZE 10.5*30CM PAD SIZE 4*26CM

Burn Mesh .Size 25*50

Burn Mesh .Size 25*30

Burn Mesh .Size 25*15

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*150 CM ,4 SIDE STICKING

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*210 CM ,4 SIDE STICKING

26000 NENO MICRON THICK PE HYGEINE FILM SIZE ,120*66CM,4 SIDE STICKING

ARHOSCOPY DRAPE . SPUN FABRIC WATER REPELLENT SIZE 180*150 CM

SOFT POLY FILM FOR MINOR SURGERY .SIZE 120*120 CM ADHESIVE AREA 25*20 CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE 15*10 CM .ADHESIVE AREA 10*10 CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE 15*20 CM .ADHESIVE AREA 10*20 CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE 50*25 CM .ADHESIVE AREA 30*25 CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE 60*35 CM .ADHESIVE AREA 35*35CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE 90*25 CM .ADHESIVE AREA 60*25 CM

ADHESIVE COATED .22GSM .PE HYGEINE FILM 25 MICRON THICK \POLU URETHAN FILM 15 MICRON THICK WITH SILICONIZED RELEASE PAPER LINER SIZE90*45 CM .ADHESIVE AREA 60*45 CM

SPONGE STICK SIZE 17 CM SPONGE SIZE 5X5X2.5 CM

FOR AMLOPIA SMALL PATCH

FOR AMLOPIA LARGE PATCH

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 15*20 CM .ADHESIVE AREA 10*20 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 90*25 CM .ADHESIVE AREA 60*25 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 50*25 CM .ADHESIVE AREA 30*25 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 60*35 CM .ADHESIVE AREA 35*35 CM

IODINE ADHESIVE COATED .45 GSM .PU FILM 15 MICRON THICK WITH 15 MICRON NATURAL COLOUR PE FILM WITH SILICONIZED PAPER LINER .SIZE 90*45 CM .ADHESIVE AREA 60*45 CM

LEVEL 4 PROTECTION FOR SURGERYIN HIP AREA WITH .SPUN LACE FABRIC WATER REPELLENT WITH 2 PART DESIGN

LEVEL 4 PROTECTION FOR SURGERY IN KNEE AND BELOW AREA WITH

DERMIMARKER WITH GENTAIN VIOLET SOLUTION IN ALCOHOL

HIV Kit special plastic optic &shoe cover ,plain sheet ,plain towel

Plain Drapes Covering patient body and instrument trolleys during surgery 25000 micron .Size 150*120 cm

Plain Drapes Covering patient body and instrument trolleys during surgery 25000 micron .Size 210*120 cm

LAPROSCOPY DRAPE SIZE 1.6*2.6 MT,INCISE DRAPE 15*35CM

25 MICRON THICK PE HYGIENE FILM SIZE 120 X66 CM

25 MICRON THICK HYGIENE FILM SIZE 110 X125 CM

Transparent dressing made of polymer film size 7 x 7 cm

Video camera Cover &Cable cover .Size 15 cm*250 cm

Modified hydroxylapatite – combination of HA 40% and bita TCP is 60% .It consist of nano crystalline agglomerates . 5 nos

Modified hydroxylapatite – combination of HA 40% and bita TCP is 60% .It consist of nanocrystalline agglomerates . 20nos

NATURAL HYDROXYAPATITE WITH NATURAL COLLAGEN 0.5-0.9 PARICAL SIZE

NATURAL HYDROXYAPATITE WITH NATURAL COLLAGEN 0.9-1.9 PARICAL SIZE

Synthetic HA Powder For prevent non union of fracture bone

C ARM COVER IN 3 PIECES TRANSPERENT NATURAL COLOUR COVER

Spun bond NW 40gsm laminated with PE 20 gsm Size 150*120cm

Spun bond NW 40gsm laminated with PE 20 gsm Size 120*150cm

Spun bond NW 40gsm laminated with PE 20 gsm Size 75*120cm

RADIO OPAQUE TYPES HAVE “BLUE POLYPROPYLENE WITH BARIUN SULPHATE “.THRED BONDED WITH THE PATTIES –SIZE 20*30 MM

RADIO OPAQUE TYPES HAVE “BLUE POLYPROPYLENE WITH BARIUN SULPHATE “.THRED BONDED WITH THE PATTIES –SIZE 20*50 MM

RADIO OPAQUE TYPES HAVE “BLUE POLYPROPYLENE WITH BARIUN SULPHATE “.THRED BONDED WITH THE PATTIES –SIZE 20*40 MM

MADE OF POLYETHYLENE TUBE AND PAPER LEADER.DISTAL END OF PE TUBE HAS PERFORATIONS AND AN ADHESIVE STRIP FOR TYING THE END AROUND THE CABLE .SIZE .LENGTH -2.5MT ,WIDTH-15 CM

Synthetic Hdroxyapatite Multiphase Calcium Low Crystalline Form .Granules .0.1-0.4 mm Average particle size ( 1 cc PACK )

Synthetic Hdroxyapatite Multiphase Calcium Low Crystalline Form . .Granules .0.4-0.9 mm Average particle size(1 cc PACK)

Synthetic Hdroxyapatite Multiphase Calcium Low Crystalline Form . .Granules .0.8-1.8 mm Average particle size(1 cc PACK )

Ventricular Peritoneal High Pressure With Bacterial Resistance tubing with regular reservoir

Ventricular Peritoneal Medium Pressure With Bacterial Resistance tubing with regular reservoir

Ventricular Peritoneal Low Pressure With Bacterial Resistance tubing with regular reservoir

Ventricular External CSF Drainage System

Lumber External CSF Drainage System

To protect Operating Team from infection of patient for head and eye

Drape For Trans urethral Resection of Prostate Size 150*160cm

Drape for Per Cutaneous Nephro –Lithotripsy Operation Size 150*275cm

Wipe to wipe the tears after any procedure Free form lint and fibre

Wet i-wipe to wipe the tears after any procedure Free from lint and fibre and chemical

Q O ssHeal ( Injectible HA 2 Gm )

Q O ssHeal ( Injectible HA 5 Gm )

Q O ssHeal ( Injectible HA 10 Gm )

Bone Graft Substitute Chemical composition should be β Tri-Calcium Phosphate, β-Ca3(PO4) 2 • Should be completely Resorbable and Remodelable with ratio between Calcium: Phosphate being 3:2, i.e.1.5. • Should be Osteoconductive and porous in nature, • Interconnected micropores with pore size 100-500 μm,• Porosity should be 60% for granules and 70% for block, wedges& cylinders,• Compressive Strength should be 7.5 +/- 1 Mpa,• Remodeling time to be about 6-18 months,• Can be used in the form of Granules, blocks, Cylinders & Wedges,• Granules should be available in following granule sizes: 1. 0.5-0.7 mm / 1. 0.7-1.4 mm / 1. 1.4-2.8 mm / 1. 2.8-5.6 , Fields of application should be Trauma, Spine Surgeries and wherever Calcellous Bone graft can be used, • Should not require any specific setting environment & ready to be used by mixing with patient blood or marrow, delivering consistent mechanical property when mixed with the biological fluids.• .Sterile guaranteed for 5 years & • Should be radiolucent and USFDA & CE OR TUV Certified

CSS - Cannulated Screw System Ø 6.5 mm, 32 mm threading (TAN). USFDA & CE Certified CannScr ø6.5 self-drill L50 TO 120mm /32 TAN

K wire. USFDA & CE Certified Wire Coil, 0.4mm dia., L 8m / Wire Coil, 1.0mm dia., L 10m / Wire Coil, 1.25mm dia., L 10m / Wire Coil, 0.6mm dia., L 8m / Wire Coil, 0.8mm dia., L 10m / Wire Coil, 1.5mm dia., L 10m

LCP Radial Head Plate. USFDA & CE Certified. • Material - TiCp • The LCP Radial Head Plate should be available in 2 versions: rim plates and neck plates. • The system should have Left and Right sided rim plate • The LCP Radial Head should have 2,3,4,5 hole Rim plates • The LCP Radial Head should have 2,3,4 hole Neck plates • The system should be compatible with 2.4/2.7 mm locking screws. • The locking screws should be self tapping and available from 8mm to 28mm length. • The implants should be made of pure Titanium. • The Instrument set should have K wire of diameter 1.6 mm with trocar tip, length 150mm. • The system should have Drill Bit ø2 w/marking L110/85 2flute f/ • The system should have Handle with Quick Coupling,length 110 mm • The system should have Universal Drill Guide 2.7 • The system should have Screwdriver Shaft, stardrive, small, Ø 2.5 mm. • The system should have Torque Limiter, 0.8 Nm • The system should have Drill Sleeve 2.7 (head LCP 2.4) • The system should have Depth Gauge for screws 2.0 and 2.4mm, measuring range up to 60mm

Bone Cement - Medium Viscocity 40g

Bone Cement - High Viscocity 40g

Bone Cement - Medium Viscocity 20g

Bone Cement - High Viscocity 20g with Genta

Bone Cement - High Viscocity 40g with Genta

Cement Syringe Kit

4.5mmpeek Tap In Knotless Anchor For Lateral Row With Offset Barbed Geometry Threads For High Pull Out And Easy Insertion. It Should Come With A Feature Of Readjusting The Suture Tensioning Of The Medial Row Anchor After Anchor Insertion Should Be USFDA Approved

6.5mm Peek Screw In Anchors, Preloaded At Distal End Of The Anchor With Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair Should Be USFDA Approved

6.5mm Bioabsorbable(75% PLLA & 25% HA), Screw In Preloaded At Distal End Of The Anchor With Double Ultrahigh Molecular Weight Polyethylene Braided FiberFor Rotator Cuff Repair - Should Be USFDA Approved

5.5mm Bioabsorbable(75% PLLA& 25% HA), Screw In Preloaded AtDistal End Of The Anchor WithTriple Ultrahigh Molecular WeightPolyethylene Braided Fiber ForRotator Cuff Repair - Should BeUSFDA Approved

4.5mm Peek Screw In AnchorsWith Open Architecture For BoneIntegration In Between The AnchorMaterial, Preloaded At Distal EndOf The Anchor With DoubleUltrahigh Molecular WeightPolyethylene Braided Fiber ForRotator Cuff Repair - Should BeUSFDA Approved

5.5mm Peek Screw In Anchors With Open Architecture For Bone Integration In Between The Anchor Mateiral, Preloaded At Distal End Of The Anchor With Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair - Should Be USFDA Approved

4.5mmpeek Tap In Knotless Anchor For Lateral Row With Offset Barbed Geometry Threads For High Pull Out And Easy Insertion. It Should Come With A Feature Of Readjusting The Suture Tensioning Of The Medial Row Anchor After Anchor Insertion - Should Be USFDA Approved

5.5mmpeek Tap In Knotless Anchor For Lateral Row With Offset Barbed Geometry Threads For High Pull Out And Easy Insertion. It Should Come With A Feature Of Readjusting The Suture Tensioning Of The Medial Row Anchor After Anchor Insertion - Should Be USFDA Approved

Meniscal Repair Implant For All Inside Technique: Should Be Usfda Approved All Inside Meniscal Repair System With Pre Knotted 2 Peek Implants Mounted On A Straight Rigid Needle And Can Be Deployed In The Meniscus At Any Angle. It Should Have An Inbuilt Depth Penetration Limiter To Prevent The Posterior Capsule

Meniscal Repair Implant For All Inside Technique: Should Be Usfda Approved All Inside Meniscal Repair System With Pre Knotted 2 Peek Implants Mounted On A Curved Rigid Needle And Can Be Deployed In The Meniscus At Any Angle. It Should Have An Inbuilt Depth Penetration Limiter To Prevent The Posterior Capsule

Arthoscopey Shaver 4.5mm Fullradius Blade Each

Arthoscopey Shaver 5.5mm Incisor Plus Elite Each

Arthoscopey Shaver 4.5mm Syanovator Blade Each

Arthoscopey Shaver 4.0mm Abrader Burr Each

Arthoscopey Shaver 4.0mm Acromionizer Each

Radio Frequency Energy shaft size 1.50 – 4.50mm and angle 90° for doing knee arthroscopy, cruciate reconstruction, shoulder arthroscopy, subacromial decompression Each

Radio Frequency Energy shaft size 1.50 – 4.50mm and angle 91° for doing knee arthroscopy, cruciate reconstruction, shoulder arthroscopy, subacromial decompression Each

Radio Frequency Energy Hook for doing knee arthroscopy, cruciate reconstruction, shoulder arthroscopy, subacromial decompression Each

HARBERT SCREW S S Length (With Head) 12 mm To 32 mm

HARBERT SCREW Titanium Length (With Head) 12 mm To 32 mm

MALLEOLAR SCREW HEX Length (With Head) 025 mm To 100 mm

GUIDE PIN THREADED Dia. 1.0 , 1.2 , 1.8 , 2.0 , 2.5 mm Length 09"

GUIDE PIN THREADED Dia. 1.0 , 1.2 , 1.8 , 2.0 , 2.5 mm Length 06"

GUIDE PIN SIMPLE LONG Dia. 1.5 mm Length 30"

GUIDE PIN SIMPLE LONG Dia. 1.5 mm Length 30" Dia. 2.0 , 2.5 , 3.0 mm Length 40"

GUIDE PIN BIDED LONG Dia. 2.0 , 2.5 , 3.0 mm Length 40"

RING FIXATOR ( ILIZAROV ) Length 80 , 100 , 120 , 140 , 150 , 160 , 180 , 200 , 220 mm / ITALIAN FEMORAL ARCH 90º Length : 140 mm to 200 mm / 120º Length : 140 mm to 200 mm , THEREADED ROD ( 06 mm ) Length 075 mm To 350 mm / TELESCOPIC ROD Length 100 mm To 250 mm / HINGES Male End 1 Hole / Female End 1 Hole / 90 Degree Hinges / POST MALE & FEMALE Male 1 , 2 , 3 , 4 Hole - Female 1 , 2 , 3 , 4 Hole WIRE FIXATION BOLT ( Side Slotted ) WIRE FIXATION BOLT ( Centre Slotted ) 1 Set of RING FIXATOR ( ILIZAROV )

CONDYLAR PLATES 95Deg 6,8,10,12,14,16 Hole with Crtical Screw 4.5 mm & DHS Screw

DHS Plate (Long Barrel / Short ) S S ( 2 H 4 H 6Hole ) DHS Screw (Bolt) S S & 4.5mm Cortical Screw S S

Dahanim Pin 3.5 mm / 4 mm / 4.5 mm /5 mm

1.5mm,2.0mm,2.5mm Straight Plate ( With Gape ) 02 Hole,04 Hole, 06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Straight Plate ( With Out Gap ) 02 Hole TO 20 Hole (2 MM VARIATION) (TITANIUM)

1.5mm,2.0mm,2.5mm "L" Plate 90° ( Left & Right ) Small 02 x 02 Hole,Big 03 X 02 Hole,Big 03 x 03 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm "T " Plate 90° ( Left & Right ) Small 02 x 02 Hole,Big 03 X 02 Hole,Big 03 x 03 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm "L" ( Oblique ) Plate 120° ( Left & Right ) Small 02 x 02 Hole,Big 03 X 02 Hole,Big 03 x 03 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm "I" Plate 06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm "Y" Plate ( Single & Double ) Small 04 Hole, Big 05 Hole, Double 06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm "X" Plate 05 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Curved Plate ( Left & Right ) 04 Hole,06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Angular Plate 150° ( Left & Right ) 04 Hole,06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Orbita Plate ( With Gape ) 04 Hole,06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Orbita Plate ( Without Gape ) 04 Hole,06 Hole (TITANIUM)

1.5mm,2.0mm,2.5mm Nose Plate H Shape Hole , Y Shape Hole (TITANIUM)

2mm 3D Square Plate 02 x 02 Hole,02 x 04 Hole,02 x 06 Hole,02 x 08 Hole (TITANIUM)

2.0mm Chain Plate Chain Shape Hole (TITANIUM)

1.5mm,2.0mm Wire Mesh 1" x 1",1.5" x 1.5",2.0" x 2.0",2.0" x 3.0",3.0" x 4.0",3.0" x 6.0" (TITANIUM)

2.5mm Angle Reconstruction Plate ( Left & Right ) 12 Hole + 04 Hole,20 Hole + 04 Hole, 24 Hole + 04 Hole (TITANIUM)

Reconstruction Plate For Mandible - Straight For 2.5mm Screw Regular 12 Hole,16 Hole , 20 Hole , 24 Hole (TITANIUM)

T.M.J 2.7mm Condyle Reconstruction Plate ( Left & Right ) 12 Hole,16 Hole , 20 Hole , 24 Hole (TITANIUM)

T.M.J 2.7mm Condyle Reconstruction Plate For Mandible-Double Angled ( Left & Right ) 04 + 16 + 04 Hole, 04 + 20 + 04 Hole,04 + 24 + 04 Hole (TITANIUM)

Mini Screw 1.5mm ( Single Slot ) 04mm To 08mm / 10mm To 12mm

Mini Screw 2.0mm ( Single Slot ) 04mm To 10mm / 12mm To 16mm

Mini Screw 2.5mm ( Single Slot ) 04mm To 10mm / 12mm To 18mm

Mini Screw 2.7mm ( Single Slot ) 06mm To 16mm / 18mm To 30mm

Mini Screw 1.5mm ( Double Slot ) 04mm

Mini Screw 1.5mm ( Double Slot ) 06mm

Mini Screw 1.5mm ( Double Slot ) 08mm

Mini Screw 1.5mm ( Double Slot ) 10mm

Mini Screw 1.5mm ( Double Slot ) 12mm

Mini Screw 2.0mm ( Double Slot ) 04mm

Mini Screw 2.0mm ( Double Slot ) 06mm

Mini Screw 2.0mm ( Double Slot ) 08mm

Mini Screw 2.0mm ( Double Slot ) 10mm

Mini Screw 2.0mm ( Double Slot ) 12mm

Mini Screw 2.5mm ( Double Slot ) 04mm

Mini Screw 2.5mm ( Double Slot ) 06mm

Mini Screw 2.5mm ( Double Slot ) 08mm

Mini Screw 2.5mm ( Double Slot ) 10mm

Mini Screw 2.5mm ( Double Slot ) 12mm

Wire Reel S.S. - 18 to 30 Gauge

K' Wire - 0.5 / 1 / 1.5 / 2.0 mm Dia 6 " Long

Template for Reconstruction Plate

S.S. Drill Bit - 1 , 1.5 , 2 Dia Titanium Coated Drill Bit

New 3 D Plate 2 mm - Per 2 Hole

Orbital Floor Mesh Plate - Lt. / Rt

Wire Mesh S.S. for Bone Graft ( Per Square Inch

Schanz Screw 1.5 / 2 / 2.5 mm Dia

Emergency Screw S.S. - 2 , 2.5 or 2.7 mm Dia - Up to 25 mm Length

(IMF) Intra Maxillary Fixation Screws Screws : 2 / 2.5 mm Dia

Angular 150° or 160° - 6 Hole

L' shape - Big with gap - 4 Hole Rt or Lt

Delta Plate

Wire Mesh S.S. for Bone Graft Per Square Inch

Template for Reconstruction Plate

Arch Bar - 30 Cms Long

Mandible Intraoral Distractor - Rt / Lt ( Set )

Maxilla Intraoral Distractor - Rt / Lt ( Set )

Intraoral Alveolar ( Vertical ) Distractor

Vertical Ramus Distractor - Rt / Lt ( Set

Vetriculo Peritoneal Medium Pressure with Regular Reservoir

Vetriculo Peritoneal Low Pressure with Regular Reservoir

Lumbar - Peritoneal Hydrocephalus. Shunt System with 14G Touhey Needle.

Bacterial Resistance Hydrocyphalus Shunt System Ventriculo Peritoneal High Pressure with Bacterial.

Bacterial Resistance Hydrocyphalus Shunt System Ventriculo Peritoneal Medium Pressure with Bacterial.

Bacterial Resistance Hydrocyphalus Shunt System Ventriculo Peritoneal Low Pressure with Bacterial.

Dome Valve reservoir with 90cm. Radio-opaque distal part one 15cm. ventricular part and two straignt connector. High Pressure.

Dome Valve reservoir with 90cm. Radio-opaque distal part one 15cm. ventricular part and two straignt connector. Medium Pressure.

Dome Valve reservoir with 90cm. Radio-opaque distal part one 15cm. ventricular part and two straignt connector. Law Pressure.

Ventricular Catheter 15cm long ID 1.3mm OD 2.5mm

Y Connector with extra long ventricular catheter.

Cerebral catheter reservoir chamber for injections with 15cm long ventricular catheter Small 12mm diameter chamber.

Cerebral catheter reservoir chamber for injections with 15cm long ventricular catheter Large 18mm diameter chamber.

Ventricular External CSF drainage system contains one bag. one 30cm Ventricular Catheter with stylet, connecter, trocar, catheter anchoring collar and connecting tube.

Lumber External CSF drainage system contains one bag. one 30cm Lumber Catheter with 14G Touhey Needle, connecter, suture collar and connecting tube.

External CSF Drainage Bag with connecting Tube.

High Density Polycthylene mesh for durameter patch size : 8x10cm.

High Density Polycthylene mesh for durameter patch size : 10x12cm.

G Patch Non Absorbable Made of Ploy Propylene non woven 8 x 10cm

G Patch Non Absorbable Made of Ploy Propylene non woven 10 x 12 cm

G Patch Non Absorbable Made of Ploy Propylene non woven 15 x 20 cm

G Kit For Level 2 protection medium size gown,disposable bag,plainsheetlarge,1 pair water proof Legging,cap,mask,nitrileglove,goggle,papperhandtowel

For all kind of craniotomies surgery. Sheet Size : 1.6x3.2m, adhesive area 20cm dia side channels and collecting funnel, poly sheet lining 1.20x1.20m.

Two hole straight plate 12mm

Two hole straight plate 15mm

Two hole straight plate 20mm

Three hole Y plate 15mm

Three hole Y plate 20mm

Four hole square plate 13x13mm hollow

Four hole square plate 13x13mm filled

Burr hole cover, Two hole Burr hole cover 18x10mm

Burr hole cover, Five hole Burr hole cover 13mm Burr hole

Burr hole cover, Six hole Burr hole cover 18mm Burr hole

Cranial Mesh 40 x 40mm

Cranial Mesh 60 x 60mm

Cranial Mesh 60 x 80mm

Cranial Mesh 100 x 100mm

Cranial Mesh 120 x 120mm

Cranial Mesh 120 x 150mm

Cranial Mesh 120 x 180mm

Multi Hole straight plates 20mm

Multi Hole straight plates 30mm

Multi Hole straight plates 67mm

Self Tapping Screw Size : 1.6 x 3mm

Self Tapping Screw Size : 1.6 x 4mm

Self Tapping Screw Size : 1.6 x 5mm

Screw Driver Handle with Screw Driver Bit.

Vision Tech

Skeleto Implants Osteosynthesis

REHAB SHOP

REHAB SHOP

Vision Tech

PARIDHI AGENCIES