Construction of Sports facility at Khrew Pampore Pulwama

Change Room with Washmroom Earth work in in mechanical excavation/ trench excavation by mechanical/ manual means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil

Providing supplying and stacking of soling including laying ramming complete as per direction of engineer incharge incl. all carriages

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 mix incl. all carriages lead and lifts complete job.incl carriage

P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size

Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete (Comforming to IS:1786-1985) upto floor 5 level complete job incl. all carriages.

Providing and laying in position cement concrete of speacified grade excluding the cost of shuttring all works upto plinth level in 1:3:6)( 1 cement: 3 coarse sand: 6 graded stone crushed aggregate 20mm Nominal Size

Centering shuttering, strutting and propping etc and removal of form work in incl. all leads lifts, carriages and scaffolding etc complete job (a)(foundation etc).

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure in plinth level upto floor level in 1:6 mix incl. curing complete including extra for Brick Work

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/F HI RIB precoatged galvalume profile sheets 0.50mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make and fixing flashings, valleys, ridges of colour coated galvalume plain sheet using incl. verticle/curved surface fixed with self drillen dash fasteners or polymer coated J or L Hooks, bolts and nuts 8mm dia with bitumen and Gl Limper washers Excl. the cost of Purlins, rafters and Trusses and but inl. cutting to size and shape wherever required all complete self deilling and self tapping fasteners of reputed make and self tapping fasteners of reputed make complete and as directed. the contractor shall have to provide a minumum 5 years warantee for sheets against deterioration, disintegrations loss of luster, variation in colour shade etc and leakages across laps fasteners etc all type of steel sheets shall be load tested to satisfy 1.10 times the design wing load and coated thickness to the satisfaction of the Engineer-in-Incharge,