Construction of Incubation Centre for KVK Kukumseri Distt. Lahul -spiti under CSKHPKV , Palampur.(SH Construction of building portion with retaining and breast wall etc.)

Amount

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 and as directed by the Engineer-in-charge at site including entire carriage of material within all leads & lifts. Any loss to the public private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material ordinary soil upto 3 mtrs depth including entire carriage of material within all leads & lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and Laying concrete for plain/reinforced concrete in 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.nominal size) and curing in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including entire carriage of material within all leads & lifts. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.

Providing and Laying concrete for plain/reinforced concrete 1:4:8 in 25mm open foundations complete as per drawing and technical specification clauses 802,803,1202 and 1203 including entire carriage of material within all leads & lifts. The rate is inclusive of octrai , royality malkana toll tax,GST and all type of other taxes imposed by the Government.

Excavation in foundations, trenches etc. in earth work in all kind of soil such as pick work, jumper work including chiseling /wedging work in dry or saturated conditions up to any depth including stacking the excavated soil serviceable and unserviceable materials sepaeately and then returning the stacked soil in fifteen centimeters layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil, unserviceable material and stacking the serviceable materials as directed by the Engineer-in-charge within all leads & lifts and disposed materials to be neatly leveled. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth complete by using mechanical mixer including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for in-situ-reinforced concrete & plain concrete work including entire carriage of material within all leads & lifts:

Foundation, footings basis of columns etc. and mass concrete

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work by using mechanical mixer & vibrator including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Foundation footings bases of columns and the like and mass concrete.

Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor twolevel

Providing mild steel/Tor steel reinforcement for R.C.C.(Reinforced cement concrete) work including bending, binding with binding wire and placing in position complete upto all floor level including entire carriage of material within all leads & lifts Tor steel. (Amba/Kamdhenu/Jai Bharat make)

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including entire carriage of material within all leads & lifts.

Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads & lifts (Kamdhenu/ Amba/Jai Bharat make)

In single Stanchions composed of rolled steel joists or channels with caps,bases splices,angles brackets etc

In trusses and trussed purlins in building.

In gratings framed guard bars, ladders, railling, brackets and similar works.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses 0.63 mm thick sheet (Tata make) including entire carriage of material within all leads & lifts.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete 0.63 mm thick sheet (Tata make). including entire carriage of material within all leads & lifts.

Providing valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick sheet (Tata make) including entire carriage of material within all leads & lifts.

Providing and fixing MS BP sheet 1.66 mm to 2.00 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads & lifts.

Providing & laying Ist .class brick work using common burnt clay building bricks in super-structure above plinth level up to all floor level with cement mortar 1:6(1cement:6sand) including entire carriage of material within all leads & lifts.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. Sal wood. including entire carriage of material within all leads & lifts.

Providing and laying 15mm.cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering up to floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads & lifts.

Providing and laying 15mm.cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads & lifts.

Providing under layer for plinth protection of 75mm.thick (unconsolidated) bed dry brick/stone aggregated 40mm.nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material within all leads & lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded crushed stone aggregated 20mm nominal size) including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall . 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement : 3 Sand ) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement: 5 Sand : 10 Graded stone aggregate) of 40 mm nominal Size) and 7.5 cm cement conrete 1:2:4 (1 Cement: 2 Sand: 4 Grade crushed stone aggregate of 20 mm nominal Size) and finished with a floating coat of neat cement complete as per standard design including entire carriage of material within all lead, lifts upto all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Governement.

Providing and laying Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm.nominal size) laid in one layer finished with a floating coat of neat cement: 50mm.thick including entire carriage of material within all leads & lifts.

Providing and laying Duro stone vetrified tiles (300x300 mm x 10mm) in grey/coloured or of approved shade in flooring, treads of steps and riser landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including entire carriage of material within all leads and lifts. (Kajaria/ Nitco/Somany make)

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads & lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel white paint including entire carriage of material within all leads & lifts.(Nerolac/Asian 1st quality make)

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including entire carriage of material within all leads & lifts.

40 mm thick Ist class deodar wood

35 mm thick Ist class deodar wood

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.35 mm thick Ist class deodar wood including entire carriage of material within all leads & lifts.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.plain grill including entire carriage of material within all leads & lifts.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including entire carriage of material within all leads & lifts.

Providing and fixing anodized aluminium, sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including entire carriage of material within all leads & lifts.(Pilot/Sheel make)

Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required colour & shade with necessary screws etc complete including entire carriage of material within all lead, & lifts. (Pilot/Sheel make )

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including entire carriage of material within all leads & lifts.(Pilot/Sheel make)

Providing and fixing aluminium door stoppers complete in all respect.

Providing and fixing oxidized M.S hooks and eyes including entire carriage of material within all leads and lifts. 150mm.

Providing and fixing Hydraulic door closer of approved make ISI complete in all respect.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary Plain Glass: 4mm thick including entire carriage of material within all leads & lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including entire carriage of material within all leads & lifts.

Distempering (Two Coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from motor dropping and other foreign matter and also including preparing the surface even and sand papered smoth including entire carriage of material within all leads & lifts. (Nerolac/Asian Ist quality make)

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil, grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink including entire carriage of material within all leads and lifts. (Nerolac/Asian 1st quality make)

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With white enamel paint including entire carriage of material within all leads and lifts. (Asian / Nerolac 1st quality make)

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer including entire carriage of material within all leads and lifts upto all floor level and heights.(Nerolac/Asian1st quality make)

Providing and laying upto floor two level cement concrete 1:2:4 (1cement : 2 Sand : 4 graded crushed stone aggregate 20mm nominal size) and curing complete in String courses coping bed plates, anchor blocks plain window sills and the like.including entire carriage of material within all leads and lifts.

Providing and fixing M.S.round holding down or anchor bolts withnuts washer plates complete including entire carriage of material within all leads & lifts.

Providing and fixing glass strips (40 mm width and 4 mm thick) in joints of terrazo /cement concrete floors including entire carriage of material within all leads & lifts.

NARINDER KUMAR

Devender Kumar

SOHAN SINGH