Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC 32 FATEH ENCLAVE OFFICERS ENCLAVE PHASE II PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹35.8 L+₹2.1 L (6.17%)Rejected-Finance 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹36.2 L+₹2.4 L (7.17%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹37.7 L+₹3.9 L (11.5%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹38.5 L+₹4.8 L (14.2%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
22 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANDEEP KUMAR
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
CERTAIN REPAIR TO JOINERY,CHOWKHATS,GLASS PANES,WIRE MESH AND IRON MONGERY IN MD ACCN AND OTM ACCN IN AOR OF AGE B/R-I UNDER GE(N) PATIALA
2023_MES_630729_1
GE (N)/TOKEN-75/2023-2024
Open Tender
Civil Works
Item Rate
180 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE NORTH PATIALA
₹90,000
Yes
9 Jan 2024
1 Dec 2023
25 Dec 2023
1 Dec 2023
22 Dec 2023
15 Dec 2023
Amount
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down shutters of any description but exc 1.0 Sqm but not exceeding 2.00 sqm each complete all as specified and directed.
Supply & Fixing for Framed work as in doors,chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E-165) complete all as specified and directed.
Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 complete all as specified and directed.
Material & labour PCC (1:2:4 ) type B0 using (12.50 mm graded aggregate) as in filling in PS Chowkhats /Holdfast Block complete all as specified and directed. .
Demolition of brick work or stone/boulder masonry built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed..
Material & labour for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean radius complete all as specified and directed.
Supply & fixing factory made flush shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Demolition of cement concrete un -reinforced of any description and in any position complete all as specified and directed.
Material & labour for PCC with type B-0. 1:2:4 (12.50mm graded aggregate) 40 mm thick as in flooring and finishing the floor even and smooth without using extra cement complete all as specified and directed.
S & F 30mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.
S & F Butt hinges 100 mm size, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed.
S & F Floor door stopper of size 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.
supply & fixing rubber door stopper not less 75 mm in length and 40 mm dia fixed to door style with suitable screw complete all as specified and directed.
Supply & fixing stainless Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge.
Supply & fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including necessary welding to chowkhats complete complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification
S & F Built in cup boards with pressed steel frame of size 75x45x1.25mm thick and shutter of 1.00 mm thick MS sheet including spray painting 2 coats over a coat of red-oxide primer on steel surfaces all around all shown on drawing No TD-178 sheet 2/3 to 3/3 dated 12 May 2001 (overall external size of cup board shutter incl frame shall be taken into consideration for the purpose of measurement) including One No hanging rod of CP steel 20mm bore with brackets & two Nos peg set of three pegs each fixed inside the shutter complete fixed in repairs i.e, including taking down and removal of old unserviceable wooden or steel built-in-cupboards incl frame from site all as specified and directed by Engineer-in charge.
Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material & labour for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F Steel window box type usning ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc including 8nmm square gaurd bars all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4 complete all as specified and directed by Engr-in-Charge.
S & F Factory made steel windows or ventilators, fixed type with glazing bars complete all as specified and directed by Engr-in-Charge.
Supply & fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples, in steel/wooden frame complete all as specified and directed.
Supply & fixing of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, fixed in repair complete all as specified and directed.
Supply & fixing for 3 mm thick figured glass pin head type and ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and directed.
Material & labour for Power coated (Minimum thickness of power coating 50 micron) Anodised aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
Material & labour for Aluminium window (Casement & Sliding) and ventilator shutters with 50 micron power coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc. and aluminium beeds in inner shutters complete fixed in all respect all as shown on drawing No TD-257 (C) as specified & directed by Engr-in-Charge.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete all as specified and directed.
Supply & fixing 12 mm thick high density fibre board pre-laminated in both sides (water proof) below & above middle/lock rail in power coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20mm size with and complete all as specified and directed by Engr-in-Charge.
Supply & fixing factory made aluminium 50 micron powder coating grill, opening size 101.6 x 63.50 mm (4"x2½") and of approx weight @ 1.345 Kg/Sqm complete fixed in position in windows complete all as specified and directed.
Supply & fixing powder coated aluminium anodised tower bolt of extruded section 200mm long complete all as specified and directed.
Supply & fixing powder coated aluminium alloy handles 125mm fabricated type anodised complete all as specified and directed.
Supply & fixing powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutters complete all as specified and directed.
Supply & fixing 5.50 mm thick sheet glass fixing in aluminium door/ window including Rubber gaskit & beading complete all as specified and directed.
M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply with prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete fixed in position in all respect including taking down existing damaged shutter complete all as specified and directed.
Supply & fixing aluminium (extruded section body ) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge.
Material & Labour for welding of steel, aluminium or iron work of thickness Exc 9 mm and n exc. 20 mm in repairs complete fixed complete all as specified and directed.
Arneja Builders
NORTON BUILDER
DELTA CONSTRUCTION CO
rkkataria and sons
m/s panchmukhi builders
Vipin Kumar and Brother
Buttar Construction Co.
Jawandha Enterprises
K B Enterprises
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .