Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹22.4 L+₹1.5 L (6.97%)Rejected-Finance | L2 | Rejected-Finance Second lowest |
| Sl No | Description | Qty | Unit | R. P. Suppliers and Construction Co. L2 | Sanidhya Enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | Supplying, installing, testing and commissioning AMF panel of IP 65 rating for existing DG set of Capacity 100 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: - | 1 | Each job | 2,25,000 ₹2,25,000 | 1,70,000 ₹1,70,000 Lowest |
| 1.01(i) MCCB 200A, 4P, 25kA, Thermal and magnetic Release-02 Nos (ii) Power Contractor 200A, 4P-02 Nos (iii) MCB 32 Amp, DP, 10 KA-01 No. (iv) MCB 06-20 Amp, SP, 10 KA-09 Nos (v) SMPS Battery Charger 24V-01 No. (vi) AMF Relay EC-2 Model-01 No. (vii) Auto Manual selector switch-01 No. (viii) PLA relay-04 Nos (ix) ON-OFF push button (R + G)-03 Nos (x) ON-OFF lamp (R + G) (1 + 1)-03 Nos (xi) Emergency stop push button red-01 No. (xii) Hooter-01 No. (xiii) Digital Amp & Volt meter with inbuilt selector switch-01 Set (xiv) MCB SP 6 Amps, 10 KA for protection-03 Nos (xv) LED indicating lamp R. Y. B.-03 Nos (xvi) C. T. Ratio 200 / 15VA-03 Nos | |||||
| 2.00 | Supplying , installing, testing and commissioning of LT feeder pillar box AC 415 V, 50 Hz, 3 Phase, 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:- | 1 | Each job | 1,56,000 ₹1,56,000 | 1,25,000 ₹1,25,000 Lowest |
| 2.01BUSBAR (a) Aluminium bus bar 300 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos | |||||
| 2.02INCOMER (a) MCCB 250A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No. | |||||
| 2.03OUTGOING FEEDERS (a) MCCB 125A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 02 No. (b) MCCB 63A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 02 No (c) Load change over switch 200A, 4 pole without SS enclosure including phase barrier, handle with door interlock, confirming to IS/IEC: 60947-3 complete - 01 No. (d) Metering module analogue type including voltmeter, ammeter, selector switch etc with all connected CTs - 01 Set (e) Indicator lamp LED type - 01 Set (Set of Three) | |||||
| 3.00 | Supplying, installing, testing and commissioning AMF panel of IP 65 rating for existing DG set of Capacity 75 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: - | 1 | Each job | 1,55,000 ₹1,55,000 Lowest | 1,60,000 ₹1,60,000 |
| 3.01(i) MCCB 200A, 4P, 25kA, Thermal and magnetic Release-02 Nos. (ii) Power Contractor 200A, 4P-02 Nos. (iii) MCB 16-32 Amp, DP, 10 KA-01 No. (iv) MCB 06-20 Amp, SP, 10 KA-09 Nos (v) SMPS battery charger 24V-01 No. (vi) AMF relay EC-2 model-01 No. (vii) Auto manual selector switch-01 No. (viii) PLA relay-04 Nos (ix) ON-OFF push button (R + G)-03 Nos (x) ON-OFF lamp (R + G) (1 + 1)-03 Nos (xi) Emergency stop push button red-01 No. (xii) Hooter-01 No. (xiii) Digital Amp + Volt meter with inbuilt selector switch-01 Set (xiv) MCB SP 6 Amps, 10 KA for protection-03 Nos (xv) LED indicating lamp R. Y. B.-03 Nos (xvi) C. T. ratio 200 / 15VA-03 Nos | |||||
| 4.00 | Supplying, installing, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:- | 1 | Each job | 3,13,000 ₹3,13,000 | 1,10,000 ₹1,10,000 Lowest |
| 4.01BUSBAR (a) Aluminium bus bar 300 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos | |||||
Tender Value
₹21.4 L
EMD Value
₹43,000
Closing Date
15 Dec 2025, 6:00 pmClosed
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
PROVISION OF AMF PANELS, EXHAUST FANS, LT PANEL AND LT CABLES AT ATS UNDER GE (AF) SAMBRA
2025_MES_735894_2
GE(AF)/SAM/TOK-44 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
9 documents required · 9 mandatory
₹500
GE AF Sambra
₹43,000
Yes
23 Jan 2026
28 Nov 2025
22 Dec 2025
28 Nov 2025
15 Dec 2025
9 Dec 2025
Amount
Supplying, installing, testing and commissioning AMF panel of IP 65 rating for existing DG set of Capacity 100 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: -
Supplying , installing, testing and commissioning of LT feeder pillar box AC 415 V, 50 Hz, 3 Phase, 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-
BUSBAR (a) Aluminium bus bar 300 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos
INCOMER (a) MCCB 250A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.
Supplying, installing, testing and commissioning AMF panel of IP 65 rating for existing DG set of Capacity 75 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: -
Supplying, installing, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-
BUSBAR (a) Aluminium bus bar 300 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos
INCOMER (a) MCCB 200A, 25 KA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.
Supplying, installing, testing and commissioning of AMF panel of IP 65 rating for exiting DG set of Capacity 30 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: -
Supplying, installing, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-
BUSBAR (a) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos
INCOMER (a) MCCB 125A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.
Supplying, installing, testing and commissioning of CPRI Approved AMF panel of IP 65 rating for exiting DG set of Capacity 15 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and Powder coating, necessary internal electric connection as required and provision of the following: -
Supplying, installing, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-
BUSBAR (a) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos
INCOMER (a) MCCB 100A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No
Excavation in trenches, not exceeding 1.50m wide and not exeeding 1.50m in depth for foundations, trenches of cable or pipe lines etc or and getting out in hard/dense soil complete all as specified and as directed.
M&L for Double Wall Corrugated HDPE Pipe IS-16205, outer dia 75 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed
Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all specified and as directed.
Removing excavated materials /soil to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all specified and as directed.
Supplying, laying and testing cable XLPE Insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts grade of size 4 core, 25 Sqmm complete all specified and as directed.
M&L for earthing to panel / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of MES SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insualted 1100 V grade FRLSH cable drawn into and including PVC caping casing adequate width and length with accessoris and fittings like bend, elbows, crosses wall crossing etc for one light /fan/bell point controlled by one switch including shunken type pressed steel box width 3 mm thick plastic laminated sheet top cover of approved make for housing switches, sockets outlet and regulators etc and with continuous 1 No cable 1.5 sqmm copper conductor PVC insualted, unsheathed as earth wire connected to earth dolly and to be connected boxes of suitable sizes for mounting to fittings etc complete all as specified and as directed
S&F switch piano, flush type, single pole one way 6 amps with box complete all as specified and directed.
S&F ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal including PVC square block complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, frame and louvers including cutting holes of required size on wall (brick/stone wall built in any mortar) round shape and making good the disturbed surfaces to match with the exisitng surfaces for exhaust the air complete all as specified and directed.
S&F exhaust fan 380mm sweep steel body, copper winding ,230V with blades and frame with louvers complete including cutting holes of required size on wall (brick/stone wall built in any mortar) round shape and making good the disturbed surfaces to match with the exisitng surfaces for exhaust the air circulation including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site also arrangement to mount the fan as per requirement complete all as specified and directed
S&F exhaust fan 450mm sweep steel body, copper winding, heavy duty, 230V with blades and frame with louvers complete including cutting holes of required size on wall (brick/stone wall built in any mortar) round shape and making good the disturbed surfaces to match with the exisitng surfaces for exhaust the air circulation including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site also arrangement to mount the fan as per requirement complete all as specified and directed
S&F PVC fresh air fan (exhaust fan ) AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the hole on wall as round shape including cutting holes of required size on wall (brick/stone wall built in any mortar) round shape and making good the disturbed surfaces to match with the exisitng surfaces for exhasut the air complete all as specified and directed.
M&L for cutting the tar macadam road / hard standings for laying cable and excavating not exe. 60cm wide and n. exc 75cm depth and getting out all as directed including filing back, consolidating etc complete and finishing it with 200mm thick PCC 1:4:8, type D-2 complete all as specified and directed
S&F galvanised iron pipes 40 mm bore, light grade, with all fitting and fixed complete to poles/Road/drains etc and ceillings or laid in floors complete all as specified & directed
M&L for Double Wall Corrugated HDPE Pipe IS-16205, outer dia 40mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed
M&L for LT Cable route indicator with a welded/riveted disc of 4 inch dia and engraved with cable with cable route marker made out of angle iron 40 x 40 x4 mm thick dug in ground with in and incl PCC 1:3:6 type C1 using 20mm graded aggregate at approx distance 10 mtr including necessary earth work complete all as specified and directed
Supplying, laying, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 95 Sqmm 4 core laid in trenches or under road complete all as specified and as directed.
Supplying, laying, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 25 Sqmm, 3.5 core laid in trenches or under road complete all as specified and as directed.
Supplying, installing, testing and commissioning of LT panel pillar box cubical type of comprising size (Panel box size), with bus bar chamber having 4 wire 415 Volts, factory made dust proof vermin proof for out door use made out of CRCA sheet 3.15 mm thick powder coated, machine pressed, both side opening with double door (front & rear) in two shalves with provision of rubber beadings and locking system, danger Notice board infront and rear sides including insulated aluminium bus bar of 240Amp capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers, each MCCB/ cubical switch shall have be independent opening , panel shall be mounted on angle iron frame and legs made from angle of size 50x50x6mm , frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete including all connections/control wiring incoming/out going with suitable size of copper conductor cable, Foundation is not less than 30 cm below ground level and not less than 45 cm above ground level, legs of panels will be grouted in centre of PCC foundation centre place will be open for connection of Under ground cables with cable glands including provision of following :-
INCOMING (a) MCCB 160 Amp Adjustable 36 KA, FP, single frame, (incoming) - 01 No.
M&L for submain wiring using 4 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 6 runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including PVC casing caping of dia not less than 32 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x6.0 Sqmm as earth continuity conductor complete all as specified and directed, Note-6 runs of single core FRLS PVC cable 10sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit
S&F sheet metal enclosure Double Door factory made distribution board 415 volts TPN 4 way, 200 Amps rated bus bar complete all as specified and as directed.
S&F MCB TPN / FP 63 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.
R. P. Suppliers and Construction Co. (BID ID -3494794)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
tender.pdf
Tender Documents • 0.98 MB
psiiSS.pdf
Additional Documents • 1.20 MB
BOQ_830920.xls
BOQ • 3.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .