Tender ID

DEFPROC

Active

Works

Electrical and Maintenance Works

REPAIR/ MAINT OF APFC CAPACITOR BANK, FAULT FINDING LT CABLES AND LT PANEL WORKS AT TECH AREA AF STN TUGHLAKABAD

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

TUGHLAKABAD | South Delhi, Delhi

Amount: ₹49 LCloses: 14 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published24 Oct 2026
Submission Opens7 Nov 2026
Closes14 Nov 2026
Bid Opening16 Nov 2026

Tender Value

₹49 L

EMD Value

₹98,000

Closing Date

14 Nov 2026, 6:00 pm5d left

Tender Inviting Organisation

Name

CWE (AF) TUGHLAKABAD

Address

Headquarters CWE AF Tughlakabad, Air Force Station, Tughlakabad, PO Sangam Vihar, New Delhi 110 080

Work Description

REPAIR/ MAINT OF APFC CAPACITOR BANK, FAULT FINDING LT CABLES AND LT PANEL WORKS AT TECH AREA AF STN TUGHLAKABAD

Tender Information

Tender ID

2026_MES_795563_1

Reference Number

CWE/TKD/TOKEN-82 OF 2026-2027

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

180 days

Location

TUGHLAKABAD

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF APPLICATION ON LETTER HEAD OF FIRM REQUESTING ISSUE OF TENDER (.pdf)

RequiredSCANNED COPY OF ENLISTMENT LETTER ALONG WITH ENCLOSURES FOR MES ENLISTED CONTRACTORS (.pdf)

RequiredFOR CONTRACTORS NOT ENLISTED WITH MES, DOCUMENTS AS MENTIONED IN NOTICE INVITING TENDER (NIT) (.pdf)

RequiredSCANNED COPY OF COST OF TENDER AND EMD IN THE FORM OF DD AS PER NIT (.pdf)

RequiredSCANNED COPY OF GST AND EPF REGISTRATION DOCUMENTS (.pdf)

RequiredANY OTHER DOCUMENT AS PER NOTICE INVITING TENDER (NIT) (.pdf)

Finance

RequiredSchedule A (BOQ) (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE (AF) TUGHLAKABAD

EMD Fee Amount

₹98,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Oct 2026

Published

24 Oct 2026

Bid Opening

16 Nov 2026

Download Starts

24 Oct 2026

Download Ends

14 Nov 2026

Submission Starts

7 Nov 2026

Clarification Period

26 Oct 2026 - 2 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (96 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Material and Labour for under ground low tension cable fault finding for exact location by using LT fault locating equipment and trace out the fault complete all as specified and directed. Note :- The rate quoted by the contractor shall include the rate for excavating the cable at the fault location & pinpoint the fault, repairing the cable using cable jointing kits and by adding extra LT cable if required at site for jointing the cables as before to the panel and testing complete all as earth work and necessary T&P etc.	18	Per fault	100	₹1,800
2	Material and Labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for stay set / Pole / feeder pillar lean concrete etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed.	5	Cubic Meter	-	-
3	Supply and fix in replacement of cable route indicator made out of 15x15x6mm GI plate welded with 8 mm x 45cm long GI rod grouted in PCC block 1:2:4 type B1 using 20mm graded stone aggregate of size 15x15x10cm and writing the words 'HT cable' as directed with synthetic enamel paint of two coats over a coat of primer including excavation and earth work all as directed.	35	Each	-	-
4	Material and Labour Replacement of LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for 60 to 400 KVA transformer of any make /type/capacity all as specified and directed.	16	Each	-	-
5	Material and Labour Top gasket sheet made out of 2 mm thick cork sheet with suitable GI bolts, nuts, washers for top of transformer any capacity complete all as specified and directed.	8	Each	-	-
6	Material and Labour Dehydrating breather assembly Aluminium/CI body of standard size filled with silica-gel for transformer of any capacity complete all as specified and directed	8	Each	-	-
7	Material and Labour Temperature gauge circular dia type of standard size for transformer of any complete all as specified and directed	3	Each	-	-
8	Material and Labour in replacement of HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity all as specified and directed.	12	Each	-	-
9	Supply and Fix in replacement digital type electronic voltmeter, size 96 mm x 96 mm, measuring range 0 to 500 V, flush pattern square type, suitable to be mounted on LT panel complete with and including suitable size of selector switch complete all as specified and as directed.	5	Each	-	-
10	Supply and Fix in replacement digital electronic ammeter range upto 400 A, size 96x96mm, flush pattern square type,suitable to be mounted on LT panel complete with and including suitable size of selector switch and CTs complete all as specified and as directed.	20	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.15 MB

Work Item Documents

CompleteTender82.pdf

Tender Documents • 0.57 MB

BOQ_892296.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Material and Labour for under ground low tension cable fault finding for exact location by using LT fault locating equipment and trace out the fault complete all as specified and directed. Note :- The rate quoted by the contractor shall include the rate for excavating the cable at the fault location & pinpoint the fault, repairing the cable using cable jointing kits and by adding extra LT cable if required at site for jointing the cables as before to the panel and testing complete all as earth work and necessary T&P etc.

Per fault

100

₹1,800

Material and Labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for stay set / Pole / feeder pillar lean concrete etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed.

Cubic Meter

Supply and fix in replacement of cable route indicator made out of 15x15x6mm GI plate welded with 8 mm x 45cm long GI rod grouted in PCC block 1:2:4 type B1 using 20mm graded stone aggregate of size 15x15x10cm and writing the words 'HT cable' as directed with synthetic enamel paint of two coats over a coat of primer including excavation and earth work all as directed.

Each

Material and Labour Replacement of LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for 60 to 400 KVA transformer of any make /type/capacity all as specified and directed.

Each

Material and Labour Top gasket sheet made out of 2 mm thick cork sheet with suitable GI bolts, nuts, washers for top of transformer any capacity complete all as specified and directed.

Each

Material and Labour Dehydrating breather assembly Aluminium/CI body of standard size filled with silica-gel for transformer of any capacity complete all as specified and directed

Each

Material and Labour Temperature gauge circular dia type of standard size for transformer of any complete all as specified and directed

Each

Material and Labour in replacement of HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity all as specified and directed.

Each

Supply and Fix in replacement digital type electronic voltmeter, size 96 mm x 96 mm, measuring range 0 to 500 V, flush pattern square type, suitable to be mounted on LT panel complete with and including suitable size of selector switch complete all as specified and as directed.

Each

Supply and Fix in replacement digital electronic ammeter range upto 400 A, size 96x96mm, flush pattern square type,suitable to be mounted on LT panel complete with and including suitable size of selector switch and CTs complete all as specified and as directed.

Each