ADDN / ALTN / IMPROVEMENT TO FACULTY OF ADM AT AFAC COIMBATORE

Amount

Material & Labour for Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed.

Material & Labour for cement concrete Type B2 1:2:4 (40mm graded aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed.

Supply only waterproofing compound, complete all as specified and directed.

Supply & Fixing for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed .

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and cutting chases for concealed wiring,etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed

Supply & Fixing for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification,complete all as specified and directed.

Supply & Fixing for 5mm thick 5mm Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent, complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel towers bolts of extruded section complete all as specified and directed.

Supply & Fixing150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

Supply & Fixing 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Supply & Fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed..

Supply & Fixing in repairs towel rail 60cm long of aluminuim anodised fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed..

Supply & Fixing for plates Fe 410-W (Gde?E- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment, complete all as specified and directed.

Supply & Fixing Rolled mild steel sections Fe 410-W (Gde?E- 250) quality A as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specified and directed.

Supply & Fixing Steel work in tubular trusse ( Sami- circularin shape) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240, complete all as specified.

Material & Labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing), removing to store and rubbish off the premises complete all as specified and directed.

Material & Labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material & Labour for Cement concrete type B-1,1:2:4 (20mm graded aggregate) 40mm thick for sub base of floors complete all as specified and directed.

Supply & Fixing of heavy duty parking tiles 300 x300 x 10mm, laid and and jointed complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material & Labour for Rendering in Cement Mortar 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all as specified and directed.

Material & Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling.surface complete all as specified and directed.

Material & Labour for Rendering with Water Proofing Compound in Cement Mortar 1:4, 15mm thick on other than fair faces of brick work or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately

Material & Labour for Rendering in Cement Mortar 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed.

Material & Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces with Cement Mortar 1:4 as in backing coat of skirting /dado all as specified and directed.

Material & Labour for Screed bed or bedding layer of mortor 20 mm thick in Cement Mortar 1:4 for laying floor finishes all as specified and directed.

Material & Labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including preparation of surfaces all as specified and directed.

Material & Labour for prepation of newly plastered wall surfaces and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer over 1mm thick wall care putty on wall all as specified and as directed .

Material & Labour for Complete removal of existing treatment on old surfaces of wall and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer over 1mm thick wall care putty on wall all as specified and as directed .

Material & Labour for preparation of old treated surfaces of ceiling and applying two coats of white wash on ceiling.surface all as specified and directed.

Material & Labour for Complete removal of existing treatment on old surfaces of wall and Finishing walls with two coat of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material & Labour for applying one coat of synthetic enamel paint preparation of old wooden surfaces all as specified and directed.

Material & Labour preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & Fixing in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 20mm bore complete all as specified and directed..

Supply & Fixing in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

Supply & Fixing in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 20 mm bore.

Supply & Fixing in repair Waste coupling of 32mm PTMT(half or full threaded) (Minimum weight 45gms) all as per Model No - T7234A1 of Make - Parryware (or equivalent in other make), complete all as per specified and directed

Supply & Fixing 20mm bore Two way Bib taps, brass chromium plated fancy type all as per Model No - T7234A1 of Make - Parryware (or equivalent in other makes) with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down of existing one, complete all as per specified and directed .

Supply & Fixing of PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

Supply & Fixing of angular stop cock with wall flage screwed down, screwed for iron pipe or for brass ferrule and fixed for 20mm bore all as per Model No.T7207A1 of Make - Parryware (or equivalent in other makes), including taking down of existing one, complete all as specified and directed.

Supply & Fixing of brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 20 mm bore pipe all as per Model No. T99805A1 of Make - Parryware (or equivalent in other makes), including taking down of existing one, complete all as per specified and directed .

Supply & Fixing of stainless steel towel rack 600mm long all as per Model No - T6908A1 of Make - Parryware (or equivalent in other Make) with lower hanger with hook, including taking down of existing one, complete all as per specified and directed

Supply & Fixing of stainless steel towel ring square all as per Model No - T6904A1 of Make - Parryware (or equivalent in other Make), complete all as per specified and directed .

Supply & Fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and raling 60 cm long complete all as specified and directed.

Supply & Fixing of soap dish all as per Model No - T6907A1 of make - Parryware.(or equivalent in other make) including taking down of existing one, complete all as per specified and as directed .

Supply & Fixing in repairs Vitreous China valveless, syphonic action type, flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketsand flush pipe etc complete all as specified and as direted.

Supply & Fixing in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed.

Supply & fixing of Vitreous China bowl urinal flat back, size of 280x335x465 mm white (minimum), all as per Modal No - Niagara N C0579 of Make - Parrywarea (or equivalent in other makes) with grating and union for discharge pipe including spreader urinal set all as per Modal No. E8113 of make - Parryware (or equivalent in other make) , complete all as specified and directed. (Note - Flushing cistern, flush pipe and waste pipe are not included in quoted)

Supply & Fixing in repair for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends 110mm radius complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipe 75 mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends 75mm radius complete all as specified and directed.

Supply & Fixing in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & Fixing in repair 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply & Fixing of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply & Fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply and fix pre wired powerunit with 20 amps mimi MCB and plug top for AC including taking down unserviceable socket complete all as specified and directed.

Material & Labour for concealed/surface Sub main wiring by making recess in wall/surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed . Note :- 2 runs of 4 sqmm, + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings, energy meters etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc all as specified and directed.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces complete all as specified and directed..

Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface complete all as specified and directed..

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one light/bell point controlled by one, one way switch complete all as specified and as directed.

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one ceiling/exhaust fan point controlled by one, one way switch, complete all as specified and as directed.

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one 05 Amps socket outlet point on same board controlled by one, one way switch, complete all as specified and as directed.

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one switch socket outlet point 5 Amps on independent board controlled by one, one way switch, complete all as specified and as directed.

Material & Labour for concealed Point wiring with 2.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc, for one switch socket outlet point 15 Amps controlled by one, one way switch, complete all as specified and as directed.

Material & Labour for concealed Point wiring with 4 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC casing caping with all accessories such as internal bend, end caps etc complete in walls and surface in ceiling/roof/etc including 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc,for one switch socket outlet point 15 Amps on independent board controlled by one, one way switch complete all as specified and as directed.

Supply & Fixing of Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

Supply & Fixing of Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

Supply & Fixing of Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply & Fixing of socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

Supply & Fixing of Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

Supply & Fixing of Modular white cover plate with frame 2 module complete all as specified and as directed.

Supply & Fixing of Modular white cover plate with frame 3 module complete all as specified and as directed.

Supply & Fixing of Modular white cover plate with frame 4 module complete all as specified and as directed.

Supply & Fixing of Modular white cover plate with frame 8 module complete all as specified and as directed.

Supply & Fixing of Modular metel flush box 2 module complete all as specified and as directed.

Supply & Fixing of Modular metel flush box 3 module complete all as specified and as directed.

Supply & Fixing of Modular metel flush box 4 module complete all as specified and as directed.

Supply & Fixing of Modular metel flush box 6/8 module complete all as specified and as directed.

Supply and fixing of LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed..

Supply and fixing LED of zoom light 24 to 60 degree rotation 7 watt 220 V AC white decorative type with driver and LED lamp of size 89 x 65 mm celiong cut out 80 mm including connecting up with three core flexiblecopper conductor cable white colour of suitable size complete all as specified and as directed..

Supply and fixing of LED track light 60 degree rotation 12 watt 220 V AC white decorative type with driver and LED lamp including connecting up with three core flexiblecopper conductor cable white colour of suitable size completeall as specified and as directed..

Supply and fixing of white colour channal for tack light with connecter suitable for 12 watts LED track lights including connecting up with three core flexiblecopper conductor cable white colour of suitable size complete all as specified and as directed..

Supply and fixing of MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 completeall as specified and as directed.

Supply and fixing of MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete all as specified and as directed.

Supply and fixing of SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete all as specified and as directed.

Supply and fixing of TPN/FP 40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete all as specified and as directed..

Supply and fixing of MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 completeall as specified and as directed.

Supply and fixing of ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed..

Material & Labour for concealed/surface Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Material & Labour for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion.

Demolition of (Unreinforcement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but not exceeding 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

Supply and install hi wall split units of capacity 1.5 TR inverter type indoor/outdoor complete with cordless remote control unit and inbuilt air ioniser and plasma filter with better indoor air quality with star rating minimum 3 to 5 star rating EER 3.2 with outdoor unit mounting unit fitted in any height/location complete all as specified and directed

TECKXPERT ENTERPRISES (BID ID -3458826)

SEMBA ELECTRICALS (BID ID -3458514)

RISHAN INFRA ENTERPRISES (BID ID -3457588)

P JAYAPATHY & C0 (BID ID -3459119)