Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3,000
Closing Date
10 Sept 2026, 1:00 pm
THE PRINCIPAL
INSTITUTE OF TEXTILE TECHNOLOGY,CIT CAMPUS,TARAMANI,CHENNAI-600113
PROCUREMENT OF LAB EQUIPMENTS
2026_DoTE_689285_2
758-A4-2026
Open Tender
Electrical Goods/Equipments
Item Wise
INSTITUTE OF TEXTILE TECHNOLOGY
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹3,000
25 Aug 2026
25 Aug 2026
11 Sept 2026
25 Aug 2026
10 Sept 2026
25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Water bath
Capacity : 400 ml x 12 Pots;
Maximum Temperature : Ambient to 90° C; Accuracy : ± 1° C;
Capacity (in liters) of Main both : 25 Liters (Approx.);
Pot size : Inner dia. : 79 ± 2 mm; Length : 122 mm;
Temperature Controller : Digital, PT – 100 sensor (± 0.1° C accuracy);
Heater capacity : 3000 watts;
Bath size : 675 x 235 x 160 mm;
Power supply : Single phase 220vAC @ 50Hz;
Consumption : 3050 watts;
Size(WDH) : 1100 x 350 x 250 mm;
Weight : 25 kg | 1 | NOS | - | - |
| 1.02 | Hygrometer
Measurement Range: 20- 80 %RH;
Accuracy : ± 2% RH;
Temperature Measurement range: 20 - 30 °C;
Sensor type: Capacitive Humidity sensor;
Response time ≤30 seconds | 1 | NOS | - | - |
| 1.03 | Twist Tester
Gauge Length : 2 to 20 inch (5 to 50 cm);
counting system : Direct result; In-built calculations; Readout in dot-matrix display; Control system : Microcomputer based pre-selectable / pre-programmable solid-state circuitry control
User-friendly menus with membrane keypad assembly;
Programmable Parameters : Measurement unit, Sample length & type, Twist direction and Speed index, etc.;
Elongation setting range : - 10 to + 100 mm;
Tensioning range : 1 to 90 grams (By calibrated augment weights);
Power supply : Single phase 220vAC @ 50Hz; Consumption : 100 watts;
Applicable standard(s) : ASTM D1422 / D1423 and IS 832;
Physical Dimensions : Size (WDH) : 1000 × 300 × 200 mm;
Weight : 12 Kg;
Swift/Wheel Circumference : 1.5 yards or 1 | 1 | NOS | - | - |
| 1.04 | Yarn Appearance Board winder
Tapered Board : 01 No. Parallel Board : 01 No; Main Unit : 01 No. Bobbins Holder Stand : 01 No. | 1 | NOS | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.51 MB
BOQ_838846.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].