GE 874/EWS-51/2022-23

Amount

B/R Portion

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement Mortar 1: 6.

M & L for Walling of random rubble sone masonry, uncoursed, built in Cement Mortar 1:4.

M & L for Excavation in trenches soft soil, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n.exc 1.5 m in depth and getting out.

M & L for Removing soil excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M & L for Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc. 25 cm.

Precast RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in landing /cover slab of septic tank/ soakage well / manhole cover and set in cement mortar 1:4 complete all as specified.

M & L for demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as specified.

Supplying two nos of manpower (2 Safaiwalas daily) to provide services of cleaning of blockages of sewage lines of any dia and depth, manholes of any size and depth, working in foul condition cleaning of manholes and sewage lines by rodding to and fro, flushing with water in sewage lines between successive manholes and keeping the system functional including water closets, floor traps, Nahani traps, gully traps etc, upto final drop/outlet into septic tanks, Dewatering contaminated/ with fine waste material sludge from septic tank and soakage well of any capacity/depth, Cleaning of septic tanks of various capacities including chambers, outlet chambers and removing out all waste solid material / sludge by mean of manually or mechanically and disposing the same to a distance n.exc. 50 mtr and burring in borrow pit within te premises complete incl covering with fresh mud, finally spraying unslaked lime, dry, aroung the septic tank, soakage well and over the pit complete, including cleaning of soil/waste/vent pipes and rain water pipes of any description and size in the area of Drugmulla (lower/upper) Garrison by two Nos Semi-Skilled/unskilled Tradesman, (having minimum educational qualification of matriculation) and in one shift of eight Hours per day (from 900 Hrs to 1700 Hours) for attending complaints of sewage cleaning as instructed by concerned JE with complaint slip and report back to the same JE including maintaining of the record of complaint slips after getting signature of users, complete all as specified and as directed by Engineer-In-Charge. (Upper Drugmulla, and Lower Drugmulla) (Cost of earth work in the pit is deemed to be included in the unit rate quated by the tenderer)

Cleaning of septic tanks and soakage well of various capacities including inlet chambers, out let chambers and removing out all waste solid material/ sludge out of cantoment area in a closed container and borrow pits and covering with fresh mud, writing the date of cleaning of septic taank, with black and white paint of size 150x200 mm and finally sprying unslaked lime, dry around the septic tank and over the pit complete all as directed (Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer) complete all as directed by Engr-in- Charge. ( Qty of thick solid sludge shall be measured for payment under this item).

Dismantling of stone sett slabs and tiles of any description or thickness in floors, aprons etc.

M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:6.

M & L for Glazed ceramic coloured tiles (450 x 300 x7mm) thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in Cement Mortar 1:6.

M & L for Chequered cement concrete tiles 20 cm x 20cm x 25 mm thick (in any colour & shape), set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over 20 mm screed bed in Cement Mortar 1:6 complete all as specified & directed.

M & L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth without using extra cement and providing joints through out the thickness of plinth protection, filled with mastic filling comprising one part of bituman 85/25 grade and three parts of sand by weight all as directed at site.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

S & F for 20 mm thick, second class soft wood boarding, planed one side, with butt joints and fixed with nails in facia, eaves boarding, complete, (except flooring and skirting) complete all as specified.

S&F for 2nd class soft wood weather boarding clean sawn, plain, 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete, fixed in repairs complete all as specified.

All as per item above but except boarding, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position unframed work complete all as specified and directed.

S & F for Second class soft wood in timber scantlings clean sawn completed all as specified and directed.

Description all as per item above, but except timber complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified.

S & F for 4 mm thick plywood (03 Nos of ply), grade BWR type BB fixed with nails to timber frame work as in wall cladding/lining, complete all as specified.

S & F for 4 mm thick plywood (03 Nos of ply), grade BWR type BB fixed with nails to timber frame work as in ceiling, complete all as specified.

S & F for Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 3 Sqcm & nexc 6 Sqcm, second class soft wood complete all as specified.

S & F for Applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth all as specified and as directed.

S & F for Supplied and fixed in repairs for 2nd class soft wood wall paneling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to existing frame with secret nailed as in wall pannelling 15mm including cornice and beeding as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds complete all as specified.

S & F for 03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified.

S&F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, any discription, including raking out joints, hacking for key, scrubbing down with water, etc.

S & F for 15mm thick rendering in Cement Mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed.

Applying two coats of cement base paint on wall over a coat of priming paint including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.

Taking up or down steel water tubing and connection of 15mm/20mm dia bore of pipe.

S & F for 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

S & f for 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F ball brass valves, high pressure, with polythene float 20 mm and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair.

60mm thick machine pressed precast concrete interlocking paver block of any shape and size with gray cement and pigment to match conforming to IS 15658-2006 of M 35 grade complete all as specified and directed.

M & L for Sand filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M/S AB AHAD RATHER

M/S GHULAM AHMAD BABA

M/S SS SHAH WALI & CO

M/S BEE AAY CONSTRUCTIONS

Javeed And Co

Bidder Name

M/S AB AHAD RATHER

M/S SS SHAH WALI & CO

Javeed And Co

M/S GHULAM AHMAD BABA

M/S BEE AAY CONSTRUCTIONS

M/S AKHLAQ ENTERPRISES