Integrated Sewerage system for Imphal City Phase II (SH Imphal sewerage Project Phase II for Imphal city zone 2 ,3, 4 and 5 Package ISP P-V(W))

Amount

Providing and Laying of DI Sewer Pipes (K-9) conforming to IS 8329: 2000 and IS 12288:2002 specifications including utility shifting, excavation, transporting the excavated earth, sand bedding, concreting, jointing, backfilling with proper compaction, shoring, timbering, sheet piling, dewatering etc complete by all means and necessary road restoration as previous condition including blacktopping, providing and laying of DI fittings (specials) and suitable DI valves as per relevant IS Code. Provision of 2.0 m high temporary barricading with all the necessary arrangement for traffic diversion materials. Design, drawing and construction of pipe crossing steel truss bridges across rivers( if any), nallah (if any), etc. and RCC manhole including inside ladder with DI cover(if necessary) including testing of pipe joints(if any), fittings(if any), valves(if any) etc. and disinfection of all pipes, trial run and commissioning etc. complete. • Pumping main from IPS near Beni Leirak to Nongpok Panthoibi (i) Dia 250mm-150m. • Pumping main from IPS at Chingamakha MU road to Heirangoithong (i) Dia 200mm- 50m. • Pumping main from IPS at Langthabal Mantrikhong Awang Leikai to Langthabal mantrikhong (i) Dia 100mm -110m. • Pumping main from MPS Near Naoriya Pakhanglakpa to STP at Langthabal Kunja (i) Dia 800mm & length 6000m. • Pumping main from IPS near Central Institute of Plastic Engineering & Technology / Near SAI (Indoor Stadium) to Tera Lukram Leirak (i) Dia 250mm - 950m. • Pumping main from IPS near Opposite side of Napram Menjor WSS to Thingom Leirak (i) Dia 250mm-600m. • Pumping main from IPS at Sangaiprou rongmei colony road & Sadokpam leikai road junction to near FCI godown (i) Dia 300mm- 550m. • Pumping main from IPS near Kwakeithel Mayaikoibi to Shishu Nishtha Niketan (i) Dia 300mm- 100m. • Pumping main from IPS at Opposite side of Naganapai Thong to Naganapai Thong (i) Dia 350mm- 100m. • Pumping main from IPS Near Junction of Kwakeithel-Khagempalli road to Haobam Marak Lampak (i) Dia 400mm- 150m. • Pumping main from IPS at Kwakeithel to Kwakeithel Konjeng Leikai (i) Dia 400mm- 50m. • Pumping main from IPS near Konjeng Leikai Pukhri, Achouba to Chingtham Leikai WSS (i) Dia 600mm- 1400m. • Pumping main from IPS at Tinsid road connector or Near Porompat Open Ground to Khurai Chingangbam Leikai (i) Dia 100mm-125m. • Pumping main from IPS at TV Tower Road to near DDK Imphal (i) Dia 200mm- 80m. • Pumping main from IPS near Crossing of Soibam Lekai Ayangpalii Road at Porompat Chuthek to Porompat crossing (i) Dia 300mm- 70m. • Pumping main from IPS near Pangal Leirak to Ayangpalli and Pangal leirak crossing (i) Dia 350mm- 50m. • Pumping main from IPS near Makha Leirak to Ayangpalli (i) Dia 400mm- 100m. • Pumping main from IPS near Assam Oil and on the Singiamei Kongba Road to Wangkhei Tokpam Leikai (i) Dia 250mm- 550m. • Pumping main from MPS Singjamei-Kongba Road & Kongba-Chongabil-ampak Road Junction to STP at Uchekon Loukol (i) Dia 600mm-6000m. • Effluent main from STP: (i)600 mm dia.-1400 Rm

Design, Drawing, construction, Testing and Commissioning of 393 cum/hr intermediate pumping station (IPS-I of zone 2 & 3) near Central Institute of Plastic Engineering & Technology / Near SAI (Indoor Stadium) under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc. complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), 1 no. Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-3.5 km).

Design, Drawing, construction, Testing and Commissioning of 367 cum/hr intermediate pumping station (IPS 2 of zone 2 & 3) near Opposite side of Nepram Menjor WSS, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of 636 cum/hr intermediate pumping station (IPS- 3 of zone 2 & 3) at Sangaiprou rongmei colony road & Sadokpam leikai road junction, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, construction, Testing and Commissioning of 534 cum/hr intermediate pumping station (IPS-4 of zone 2 & 3)near Kwakeithel Mayaikoibi, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc.. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, construction, Testing and Commissioning of 831 cum/hr intermediate pumping station (IPS-5 of zone 2 & 3) at Opposite side of Nganappi Thong, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley (suitable), Mechanical float type level indicator with all accessories and board complete (suitable), Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.5 km).

Design, Drawing, construction, Testing and Commissioning of 1064 cum/hr intermediate pumping station (IPS 6 of zone 2 & 3) at Junction of Kwakeithel-Khagempalli road , under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of 1317 cum/hr intermediate pumping station (IPS 7 of zone 2 & 3) at Kwakeithel, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), 1 no. Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.5 km).

Design, Drawing, construction, Testing and Commissioning of 1899 cum/hr intermediate pumping station (IPS 8 of zone 2 & 3)near Konjeng Leikai Pukhri, Achouba, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable, guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.5 km).

Design, Drawing, construction, Testing and Commissioning of 361 cum/hr intermediate pumping station (IPS-1 of Zone -4) near Beni Leirak, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel ,Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, construction, Testing and Commissioning of 260 cum/hr intermediate pumping station (IPS-2 of Zone -4) Chingamakha MU Road, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), .Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.5 km).

Design, Drawing, construction, Testing and Commissioning of 78 cum/hr intermediate pumping station (IPS-3 of Zone 4) near Langthabal Mantrikhong Awang Lekai, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc.. . (i) Design, drawing and construction of suitable diameter wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.5 km).

Design, Drawing, construction, Testing and Commissioning of 2526 cum/hr main pumping station of (MPS -2 of Zone-4) Near Naoriya Pakhanglakpa, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable diameter wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-3.5 km).

Design, Drawing, construction, Testing and Commissioning of 42 cum/hr intermediate pumping station (IPS-1 of Zone-5) at Tinsid road connector or Near Porompat Open Ground, under the command area of 16 MLD STP at Uchekon Loukol, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable diameter wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable.) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.0 km).

Design, Drawing, construction, Testing and Commissioning of 232 cum/hr intermediate pumping station (IPS -2 of Zone -5) near TV Tower Road , under the command area of 16 MLD STP at Uchekon Loukol, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including necessary HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays, Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, construction, Testing and Commissioning of 752 cum/hr intermediate pumping station (IPS-3 of Zone -5) near near Crossing of Soibam Lekai Ayangpalii Road , under the command area of 16 MLD STP at Uchekon Loukol, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, construction, Testing and Commissioning of 854 cum/hr intermediate pumping station (IPS -4 of Zone 5) near Pangal Leirak , Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of necessary RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing of rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement ,), Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable.) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-4.5 km).

Design, Drawing, construction, Testing and Commissioning of 1220 cum/hr intermediate pumping station (IPS-5 of Zone-5) near Makha Leirak, under the command area of 16 MLD STP at Uchekon Loukol, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of necessary RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows , Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute ,Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley , Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-3.0 km).

Design, Drawing, construction, Testing and Commissioning of 367 cum/hr intermediate pumping station (IPS-6 of Zone-5) near Assam Oil and on the Singiamei Kongba Road, under the command area of 16 MLD STP at Uchekon Loukol, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of necessary RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of suitable Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide channel , Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable with one standby) , CI Swing type check valve for each submersible pump delivery (suitable.), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley (1 set), Mechanical float type level indicator with all accessories and board complete (1 set), Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of 1417 cum/hr main pumping station (MPS-3 of Zone-5) near Singjamei-Kongba Road & Kongba-Chongabi lampak Road Junction, under the command area of 27 MLD STP at Langthabal Kunja, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of necessary RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of suitable Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement , Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation , Manual Screen complete guide, Conveyor Arrangement for mechanical screen complete with chute , Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable with one standby) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete , Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), Dry type Transformer (suitable with one standby), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-1.5 km).

Design, Drawing, Construction, Commissioning and trial run of different units of Sewage Treatment Plant 16 MLD (including Civil, Mechanical, Electrical, Area-2 hectare) at Uchekon Loukol as per specification mentioned in the schedule and meeting effluent characteristics by NGT and as per items: (i) Design, Drawing, Construction and testing of primary treatment units such as receiving chambers (suitable with one standby), coarse screen chamber (suitable for manual and mechanical), inlet chamber (suitable), fine screen chamber (suitable), grit chambers (suitable) including platform, handrail and other miscellaneous works etc complete (ii) Design, drawing, construction and testing of biological treatment units such as SBR basin (suitable with one standby), chlorine contact tank (suitable), sludge pump (suitable), polyelectrolyte dosing tank (suitable), effluent treatment pump (suitable) etc. including platform, handrail, sludge collection Chamber etc and other miscellaneous works etc complete (iii)Design, Drawing and Construction of buildings such as SBR air blower cum Motor Control Centre building (G+1), Chlorination cum chlorine tonner house (above chlorination tank) , centrifuge feed pump house, centrifuge house, HT substation, staff quarters (G+1), DG set house, security cabin, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation, drains etc. complete. (iv) Supply, installation, testing and commissioning of mechanical and manual coarse screen (suitable), mechanical fine screen and manual fine screen (suitable), suitable belt conveyer for screenings (suitable), Detritus Mechanism including Grit Collection Mechanism, Grit Classifier Mechanism & Organic Return Pumps (SS 304 wetted parts, suitable.), Air Blowers with Acoustic Enclosures (Twin Lobe, Rotary, CI, suitable), Motors (suitable),Return Activated Sludge Pumps with Motors(Submersible, suitable), Surplus Activated Sludge Pumps with Motors(Submersible, suitable), Decanters ( Moving Weir Type, SS 304, suitable), Core components of Decanters comprising Variable Frequency Drives, Electric Motors with Gearbox, Lifting Mechanisms, Level Switches, Magnetic Switches etc. complete (suitable), Diffusers (Fine Bubble Membrane Fixed Type), Air Pipe Grid for Diffusers with Pipe Supports, Hardware, Adhesives etc. complete (UPVC Pipe, SS 304 Supports ), Electric Hoist with Electric Travelling Trolley for Air Blowers (Suitable) Gas Chlorination System including Vacuum Chlorinators (suitable), Booster Pumps, Interconnecting Piping, Safety Equipment & other Accessories(suitable), Electric Hoist with Electric Travelling Trolley for Chlorine Tonners (Suitable), Sludge Sump Mixer (suitable), Centrifuge Feed Pumps with Motors (suitable), Centrifuges with Motors (Solid Bowl, SS 304 Wetted Parts, suitable), Dewatering Polyelectrolyte Dosing Pumps with Motors (Metering Type, SS 304, suitable), Dewatering Polyelectrolyte Dosing Tank Agitators (SS 304, suitable), Centrate Transfer Pump (Submersible, suitable), Suitable Electric Hoist with Electric Travelling Trolley for Centrifuges Suitable (suitable), Service Water Pumps (Centrifugal, suitable) and its motors (suitable), Necessary piping, valve or sluice gates, structural steel etc. complete. (v) Design, Drawing and Construction of dedicated HT Substation including 4 – Pole Structure, HT Panel, suitable power transformer, Power Control Centre, Internal HT Cabling etc. complete (suitable) including Motor Control Centre, Power & Control Cables with Cable Termination Kits etc. complete, Cable Trays with Fittings, Hardware & Supports etc. complete, Earthing including Earthing Pits, Earthing Materials (GI/Copper Earthing Strips, Earthing Cables, Hardware) etc. complete, Local Push Button Stations, Junction Boxes with Accessories, Hardware etc. complete, Plant Lighting (Inside Buildings and Plant Area) including Lighting Panel, Lighting Distribution Boards, Lighting Poles, Fitting & Fixtures, Cables, Hardware etc. complete, DG Set (suitable) including AMF Panel and all accessories complete (suitable) (Length-3.0 km). (vi) Supply, Installation and testing of instruments such as Pressure Gauges: Diaphragm Type (suitable.), DO Meters: Immersion Type (suitable), Level Indicating Transmitters: Hydrostatic Type (suitable), VFD for Air Blowers (suitable) VFD for Decanters (suitable), Soft Starter for Air Blowers (suitable) , Decanter Level Sensor (suitable), Decanter Position Sensor (suitable), Level Transmitters: Ultrasonic Type (suitable), Differential Level Transmitters: Ultrasonic Type (suitable), Flow Meter: Ultrasonic Type (suitable), Level Switches: Capacitance Type (suitable), PLC-Cum-Control Panel (suitable), Online 2 KVA UPS with 1/2 Hours Battery Back- up (suitable). (vii) Design, Drawing and Construction of Single Storey RCC Laboratory Building with tile flooring, anodised Aluminium Windows and Ventilators including Laboratory Equipment, Glass Wares, Reagents, Chemicals, Incubator etc. and other miscellaneous items as required for the analysis of Water Quality as per CPHEEO manual on sewerage and treatment /WHO and conforming to NABL recommended standard.

Operation & Maintenance of the above Infra Structures for a period of 7 years after commission of the project on turn- key basis.

JAYANTISUPER CONSTRUCTION PVT. LTD.

US Dollar

European Dollar

Japanese Yen