Construction of Primary Hea...

Providing laying ,testingandcommissioningof(C) class heavy duty MS pipe conforming to SI SI 1239 /3589 i/c fitie ke el gra ren chains ting excaration s antidios o treat ne wit oc lar asphat atpe as per IS 10221 refilling the trench etc o.f following sizes complete as required.NS

SITCOfINTERNALOREXTERNALweatherproof 7 standard fire hose cabinet (750 m x600 m x 250 m deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with `Fire Hose` marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe andnozzle spanner. (For external hydrant system) (N.S )

FIRE CHECK DOOR SITC OF 46 mm steel fire check door of 120 minut fire rating confirming to bs 476 part -22 and is 3614 part-11 fabricated with 2 no, 1mm thick galvnized steel sheet sandwiching with proprietary fire resistant insulation materials in between. The door frames are manufactured from 1.5mm thick galvanized steel sheet pressed from to double rebate profile of size 143mm x 57 mm. the door frame and door shutters to finish with powder coatingSITC OF 2HR FIRE RATED METAL DOOR MAKE LAKSHITA FIRE INDIAN FIRE FIRE CUT . location- basement stair case, electrical cantrol room and all floor stir case where there is no natural vantilation (N.S)

Providing, fixing, testing and commissioning of 100 mm dia Burden type, Stainless Steel dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0- 15 Kg/cm?.

SITC OF DOL type fire pump panel suitable for 450 Ipm fire pump 415 V plus /-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof. Panel shall be provided with heat shrinkable sleeves and shall be colour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system.

Fabrication, supply, insallation testing and commissioning of electrical control panel of cubical construction , floor mounted type, fabricated out of 2mm thick Crca sheet, compartmentalised with hinged lockable door ,dust and vermin proof ,powder coated of approved shade after 7 tanktreatment process, cable alley ,interconnection with suitable size copper conducor cable / solid copper strip, having switchgears and accessories, numbering etc completein all respect ,suitable for main fire pump pressurisation pump and diesel pump set complete as per CPWD specification with following m coming and outgoing, suitable for opreraton on 415v, 3 phase, 50 Hz Ac Supply with enclosure protection class IP 42 as required.As per DSR 18.5.3

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.5

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.6

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.4