Construction of Blood Bank with Pathology Building at Shekh Bhikhari Medical College, Hazaribag for the Year 2021-22

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design, building specification & direction of E/I. Contractor to include necessary detawering / shoring if required.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B) hard soil @ 80% of total Excavation

Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume) Sand filling in Foundation, Flooring & Plinth with site

Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A one Brick Flat Soling joints with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing & injecting chemical emulsion for pre- construction Anti termite treatment and creating a chemical barrier under and all around the column pits wall trenched basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building with approved chemical as per IS code as per specification and direction of E/I

Providing P.C.C.m-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5.to 3 inccluding screening shutting . Mixing cement concrete in mixer and placing in position . vibrating cuttingtaxes and royalty all complete as per vibrating staking cuting taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C.M. 20 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3excluding the screening shuttering mixing cement concrete in mixer placing in position, vibrating , stroiking curing (but excluding the cost of reinforcement, taxes and royality all complete as per building specification and direction of E/I . 1:1:5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing R.C.C.M.20 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size Graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering mixing cement concrete in mixer placing in position, vibrating , stroiking curing (but excluding the cost of reinforcement , taxes and royality all complete as per building specification and direction of E/I

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Extra for centering and shuttering in R.C.C. works of stiffner and column in foundatoion and plinth ( having similar design and specification as for such works in superstructure) as per specification and direction of E/I:

Suspended floor roof, landing Platform. ( as per slab area )

Centering and Shuttering including strutting , propping etc and removal of form for Lintel , Beam , plinrh beam etc .

Centering and Shuttering Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and Shuttering Staircases

Providing TMT reinforcement of following dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.

Extra for providing and mixing water proofing material 'Impermo' or equivalent in cement concrete work @ 1 kg per 50kg of cement.

Extra for R.C.C .or P.C.C. work for each consecutive floor above first floor complete as per direction of E/I

Providing designation 100A Brick work with flyash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in CM (1:4) inFoundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete

Providing designation 75A Brick work in CM ( 1:6) in Superstructure with Approved quality of cleen coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15 mm depth Curing taxes and royaly all complete as per building specification and direction of E/I

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing 6mm Cement Plaster (1:6) with clean coarse sand of F.M. 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royality all complete as per Building specification and direction of E/I

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I internal plaster

Providing 25mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I External plaster

Extra for plaster work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/l. Extra for plaster work over exterior surface

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in external plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge..

Supplying, fitting and fixing good quality, well dressed and well seasoned teak wood in chaukhat in doors, windows, skylights,fan lights and C/W celatial windows openings including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface abutting walls and lintels all complete as per building specification and direction of E/I

Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying fitting and fixing 30mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing tinted glazing in windows with 4mm thick with EPDM rubber / neoprene gasket etc. all cost complete as per architectural drawing and the direction of E/I With Float Glass Panes of 5.50mm Thick

Providing and fixing tinted glazing in windows with 8mm thick with EPDM rubber / neoprene gasket etc. all cost complete as per architectural drawing and the direction of E/I

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Supplying and fixing rrlltng shuters of approved make,made of required size of M.S.laths inter locked together through their intire length jnd jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for insfde and outside locking with push and pull operation complete including the cost of prioviding and fixing necessary 27.5 cm long wire springs grade no. 2 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mmdia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium Extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws win rubber stopper

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade:- (Area of slab upto 0.50 sqm )

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing 50mm thick cement concrete flooring (1.2.4) with 20mm to 6mm. size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/1.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layerwill be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed withwater proofing cement compound @ 0.126 kg/sqm. This layerwill be allowed to air cure for 4 hours followed with water curingfor 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing two coats of Plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper , applying putty wherever required , scffolding complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing two coats of synthetic enamel paint of approved shade and makje over new wopoden surface including washing cleaning and preparing the walls, scafolkding, wqashing of floor and traxes all complete as poer building specification and direction of E/I

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter

Bars above 12 mm diameter

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.

Making khurrah 45 x45 cm with av. Minimum thickness of 5 cm cement concret 1:2:4 over PVC sheet 1m x1 m x 400 micon, finished with 12 mm cement plaster 1:3 and a cost of neat cement rounding the edges and making and finished the outlet complete

Providing and fixing on wall face unplasticised- PVC rain water pipes conforming to IS: 13592 TypeA, including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. Single socket pipe, 110 mm diameter

Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Riging PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. bend 87.5 digree, 110 mm bend

Shoe( plain) 110 mm shoe.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50mm hard wood plugs, screwed with M.s screws of required length including cutting brick work and fixing in cement mortar 1;4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110 mm

Providing & Fixing Toughened glass 12 mm thickness

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charg With average thickness of 120 mm and minimum thickness at khurra as 65 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primersuitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame ofperimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 MM THICK Tapered edge gypsum Moisture resistant board

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels / tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518: 1991 , comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600 mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre ) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

aggregate

red brick

Fly Ash brick

Providing and fixing water closet squatting pan (indian type WC pan) with 100mm sand cast iron P or S trap, 10 litre low fixture complete , including ctting and making good the walls and level white PVC flushing cistern , including flush pipe with manuall controlled device (handle leer) cofirming to IS 7231, with all fittings and floors wherever required white vitreous china Orissa pattern WC pan of size 580X440mm with integral type foot rests

Providing and fixing White vitreous china extended wall mounting water closet of size 780 x 370 x 690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fittings of flushing capacity 3 liters/6 liters(adjustable to 4 lit./8 litres),including seat cover,and cistern fittings,nuts,bolts,and gasket etc. complete

Providing and fixing White vitreous china water less urinal of size 600x330x315 mm having antybacterial/germs free ceramic surface,foxed with cartridge having debris catcher and hygiene seal

Provding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, , 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the .wall wherever required. White vitreous china flat back wash basin size 550X400mm with a single15mm CP brass pillar tap

Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Flexiable pipe 40 mm dia

Provding and fixing 600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers complete.

Provding and fixing 600X120X5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40 mm long screws ,rawl plug etc, complete

Provding and fixing toilet paper holder cp brass

Provding and fixing PTMT bottle traps for wash basin & sink Bottle trap 38 mm single piece moulded with height of 270mm , effective length of tail pipe 260mm from the centre of waste coupling 77mm breadth with 25mm minimum water seal ,weighing not less than 263 gms.

Provding and fixing PTMT liquid soap container 109 mm wide,125mm high and 112mm distance from wall of standard shape with bracket of same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Provding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645mm width 78mm and effective height of 88mm , weighing not less than 190 gms

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamp at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm dianominalouter pipe

25 mm dia. Nominal outer dia pipes

32 mm dia. Nominal outer dia pipes

40 mm dia. Nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl Chloride(CPVC) pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings,i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.Concealed work, including cutting chases and making good the walls etc. 15 mm dia. Nominal outer dia pipes

20 mm dia. Nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl Chloride(CPVC) pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, This includes jointing of pipes & fittings with one step CPVC solvent cement trenching,refilling and testing of joints complete as per direction of engineer in charge. 40 mm dia. Nominal outer dia pipes

Providing and fixing brass gate valve with C.I. wheel of approved quality. 20 mm Nominal bore

25 mm Nominal bore

32 mm Nominal bore

40 mm Nominal bore

Providing and fixing metal non-return valve of approved quality. 32 mm nominalbore horizaontal

Providing and fixing metal non-return valve of approved quality. 32 mm nominalbore 03-09-2021-vertical

Providing and placing on terrace(at all floor levels)polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore

circular type 100mm nominal dia

Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion 75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rainwater pipes conforming to IS: 13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. couplar - 75 mm

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rainwater pipes conforming to IS: 13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. couplar -110 mm

Single tee without door 75x75x57 mm

Bend 87.50 (75mm)

110 mm bend

shop(plain) 75 mm

110 mm shope

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.110 mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottoms depth upto 1.5m ,including getting out the excavated soil as required,in the layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering and desposing of surplus excavated soil asdirceted within a lead of 50m pipes cables etc exceeding 80mm dia but not exceeding 300 mm dia

Providing and laying non -pressure NP2 class(light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete 150 mm dia rcc pipe

250 mm dia r:c:c pipe

Constructing brick masonary manhole in cement mortar 1:4 (1 cement, 4 coarse sand.) R.C.C. top slab with1:2:4 mix(1 cement, 2 coars e sand, 4 graded stone aggregate 20 mm nominal size) foundation cocrete 1:4:8 mix (1cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size.) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand.) finished with floating coat of neat cement and making channels in cement concrete 1:2:4. finished with floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension tatal weight of cover and fram to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

Inside size 120x90cm and 90 cm deep including C.I. cover with frame (medium duty) 500mm internal diameter total weight of cover and fram to be not less than 116 kg (weight of cover 58kg and weight of frame 58 kg )With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

Constructing brick masonry road gully chamber (Catch Basin) 45x45x77.5cms with bricks in cement mortar 1:4(1cement: 4 c coarse sand)with pre-cast R.C.C. vertical grating complete as per standard design With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m All kind of soil

Supplying and filling in plinth with sand under floors including watering,ramming consolidating and dressing complete

Providing and laying in position concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 1:2:4(1cement:2 corse sand:4 graded stone aggregate 20mm nominal size

Brick work with common burnt clay FPS(non modular) bricks of class designation 7.5 in foundations and plinth in Cement morter 1:6(1 cement : 6 corse sand)

12 mm cement plaster finished with a floting coat of neat cement of mix 1:4(1 cement : 4 fine sand)

Dry brick edge flooring in required pattern with bricks of class designation 7.5 on a bed of12mm mud mortar including filling joints with jamuna sand with common burnt clay non modular bricks

Reinforced cement concrete work in beams, suspended floors roofs,having slope upto 15, landing,balconies, shelves,chajjas,lintal,bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5;3

Centring and shuttering including strutting propping etc. and removal of form for Suspended floors ,roofs,landings,balconies and access platform

Lintels,beams,plinth bams,griders,bressumers and cantilivers

Columns,pillars,piers,abutments,posts and struts

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe 500D or more

Supplying and fixing C.I cover without frame for manholes:500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg.

Providing M.S foot rests including fixing in septic tank with 20 x 20 x 10 cm cement concrete blocks 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) as per standard design: With 20 x 20 mm square bar

Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottoms depth upto 1.5m ,including getting out the excavated soil as required,in the layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering and desposing of surplus excavated soil asdirceted within a lead of 50m pipes cables etc exceeding 80mm dia but not exceeding 300 mm dia

Providing and laying non -pressure NP2 class(light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete 250 mm dia R.C.C. pipe

Constructing brick masonry road gully chamber (Catch Basin) 45x45x77.5cms with bricks in cement mortar 1:4(1cement: 4 c coarse sand)with pre-cast R.C.C. vertical grating complete as per standard design:With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m all kind of soil

Supplying and filling in plinth with sand under floors including watering,ramming consolidating and dressing complete

Providing and laying in position concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 1:2:4(1cement:2 corse sand:4 graded stone aggregate 20mm nominal size

Brick work with common burnt clay FPS(non modular) bricks of class designation 7.5 in foundations and plinth in Cement morter 1:6(1 cement : 6 corse sand)

12 mm cement plaster finished with a floting coat of neat cement of mix 1:4(1 cement : 4 fine sand)

Dry brick edge flooring in required pattern with bricks of class designation 7.5 on a bed of12mm mud mortar including filling joints with jamuna sand with common burnt clay non modular bricks

Reinforced cement concrete work in beams,suspended floors roofs,having slope upto 15, landing,balconies, shelves,chajjas,lintal,bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement with 1:1.5;3

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe 500D or more

Supplying and fixing C.I cover without frame for manholes:500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg.

Boring/drilling borewell of required dia for casing/strainer pipe by suitable method prescribed in IS:2800(part-I),including collecting sample from different strata,preparing and submitting strata chart/bore log,including hire & running charges of all equipments,tools,plants and machineries required for the job ,all complete as per direction of engineer in charge,upto 90 metre depth below the ground level All type of soil 300 mm dia

Supplying,assembling,lowering and fixing in virtical position in borewell ,unplasticized PVC mediumnwell casing (CM) pipe of required dia, confirming to IS:12818,including required hire and labour charges,fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal dia

Supplying,assembling,lowering and fixing in virtical position in borewell ,unplasticized PVC medium well screen (RMS) pipes with ribs , confirming to IS:12818,including required hire and labour charges,fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal dia

Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in Recharge Pit,in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge

Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge

Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm, in the Recharge Pit, in the required thickness over gravel layer ,for all leads & lifts, . all complete as per direction of Engineer-in-charge

Providing & fixing suitable size thre platebto top of borewell housing/casing pipe,removable as per requirement all complete for borewell of 100 mm dia

Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete 100 mm clamp

Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I), 100 mm dia

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil. 300 mm dia

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil. 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm nominal size dia

Establishment of 2.0 HP of submersible pump set (detail attchhed)

SWR PVC PIPE 110 MM DIA

PVC FITTING DOOR TEE 110 MM DIA

PVC FITTING DOOR BAND 110 MM DIA

PVC FITTING BAND 45 110 MM DIA

PVC FITTING VANT COWAL 110 MM DIA

PVC FITTING PIPE CLIP 110 MM DIA

PVC FITTING FLOOR TAP 110X110 MM DIA

PLAN ' Y ' 110 mm dia

Supplying and drawing following size of PVC insulated copper conductor single core cable in the existing surface/ recessed PVC conduit as require 2X1.5sq mm

Supplying & fixing 65 watt LED Type street light luminiare with pressure die cast aluminium housing ,for ingress protection of IP-65 and complete with all accessories etc.on pole / building including connection with FR PVC insulated copper conductor cable ,earthing the body etc.

Supplying & fixing 10 watt LED Type POST TOP LANTERN suitable for garden/park light coplete with integrated electronic driver and all accessories etc. including connection with FR PVC insulated copper conductor cable ,earthing the body etc.

Supplying and erection of 6 mtr hieght Hot- dip Galvanised octagonal street light pole with following arm with top dia 70 mm and bottom dia a/f 130 MM ,MADE OF 3MM THICK sheet along with base plate of size 260x260x16 mm ,small door opeing for junction box mounting and suitable size foundation bolts with template and all complete as required .(but ithought pole collar) double arm 1500 mm

Trench cutting in soil of suaitable size 0.457mtr (1.5feet) wide and 0.609 mtr (2 feet ) depth including reffiling the trench with same etc as required.(for laying the cable)

Supplying and fixing folllowing sizes sigle phase / 2 core low wattage pole mounted fuse box ,fabricated with 18 SWG iron sheet ,complete base, aluminium strip , clamp including painting etc. as required. 200 mm x150 mm

Supplying and laying following sizesw and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto 11kv, including excavatiion the soil, sand cusioning,protective coering and refilling the trench etc. as required. .(conforms to IS :1554,PART -1) 6sq mm 2 core

Supplying and laying following sizesw and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto 11kv, including excavatiion the soil, sand cusioning,protective coering and refilling the trench etc. as required. .(conforms to IS :1554,PART -1) 10sq mm 2 core

Supplying and fixing wall mounted iron sheet cubical panel board , fabricated with following guage iron sheet , suitaable for panel mounted switch disconnector ,including bus -bar chamber , insulator , nut-bolt and painting etc as required .(But without busbar copper strip).With 16SWG Iron sheet

Providing and fixing following rating and capacity four pole sheet mettal switch disconnector fuse unit in the in existing panel board , with rewirable type fuses ,including drilling holes in cubical panel, making connection s,etc . as required 63 TPN

Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty,complete with all accessories including connections, earthing the body etc. as required. 100 AMPS

Providing and fixing following capacity double pole /TP & N MCB disconnector ISOLATOR in existing metal board , complete with testing and commissioning , etc. as required. 40amps , double pole

Providing and fixing following capacity double pole /TP & N MCB disconnector ISOLATOR in existing metal board , complete with testing and commissioning , etc. as required. 40amps , TP&N

Providing and fixing following capacity double pole /TP & N MCB C series in existing metal board , complete with testing and commissioning , etc. as required. 32 AMP DP

Providing and fixing following capacity double pole /TP & N MCB C series in existing metal board , complete with testing and commissioning , etc. as required. 40 AMP TPN

Supplying and drawing following sizes of FR PVC insulated copper conductor , single core cable in the existing surface /recessed PVC conduit as required. 2x2.5 sq . mm

providing and making steel pole collar with cement concrete 1:3:6(1:xement:3 corse sand:6graded stone agregate 20 mm nominal size)including form work,plastring if required,curing etc. as required. (VOLUME OF POLE PIPE NOT TO BE DEDUCTED)

Supplying ,installation ,Testng and commisioning of 200 KVA 3 phase 11/0.433 KV OUT DOOR TYPE, OIL -IMMERSED ONAN ,DELTA STAR DISTRIBUTION TRANSFORMER (CONVNTIONAL ) Suitable for 11 kv ,50 Hz distribution system , energy efficiecy ,Regulations 2009 and amendments their in and the transformers shall be labeled for three star rating and the loss shall be accordingly. all complete, as required. CONFORMING TO IS :1180L2 (KIRLOSKAR /SAI RAM POWER CONTROL

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. Gr -C

Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

Power Plug Wiring in PVC conduit (2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.2x1.5 Sqmm + 1x1.5 sqmm earth wire

2x2.5 Sqmm + 1x2.5 sqmm earth wire

4x6 Sqmm + 2x6 sqmm earth wire for lighting circuit of each flat

4x10 Sqmm + 2x10 sqmm earth wire -power supply to each flat

S/F TP MCB DB: Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make-Schneider/Legrand/L&T/ABB/Siemens 4 ways (4+12 ways) double door ( Power+ lighting) - DBs

S/F TP MCB DB: Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make-Schneider/Legrand/L&T/ABB/Siemens 6 ways (4+16 ways) double door -Power DBs

S/F 'C' series SP MCB: Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required 6/32A Single Pole

40A TPN MCB

50/63A TPN MCB

S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Electronic Call bell: Supplying and fixing electronic musical call bell suitable for D.C/A.C, single phase 230 volt, complete as required.

TV cable in Existing Conduit: Supplying and drawing co-axial cable RG-6 grade copper conductor, PE insulated with PVC sheath in the existing surface/ recessed PVC conduit as required.

Supplying and fixing following size ISI marked PVC conduit along with acccessories in recess including cutting the wall and marking good the same as required. 20 mm dia for TV +Telephone

S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 AMPS, one way switch

S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 Amps, 3 pin socket outlet

S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. TV antenna socket outlet

S/F Modular type electronic fan regulator: Supplying and fixing of stepped type electronic fan regulator on the existing modular plate and switch box including connections but excluding modular plate etc as required.

S/F Modular boxes , base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm)-for TV

S/F Batten Holder: Supplying and fixing batten/angle holder including connection etc. as required.

3.5CX25 sq. mm armoured AL Cable. Lift

Supplying and laying of XLPE /PVC insulated PVC sheathed (Heavy Duty) Armoured Electric Cables with aluminium conductor for working voltage 1100 volts to IS:7098 (Part-1) / IS:1554 (Part-1) as applicable, All complete as per building specification and direction of E/I. 3.5 core 95 sqmm

Supplying and laying of XLPE /PVC insulated PVC sheathed (Heavy Duty) Armoured Electric Cables with aluminium conductor for working voltage 1100 volts to IS:7098 (Part-1) / IS:1554 (Part-1) as applicable, All complete as per building specification and direction of E/I. 3.5 core 300 sqm

Providing and fixing 4 pole ON-load/panel mounted Changeover Switch ,IN EXISTING PANEL BOARD ,250 Amp Rating, making connection and earting the body etc.all complete as per specification and direction of E/I.

Providing and fixing digital volt meter 3 phase in existing cubicle panel board including drilling holes in panel board ,making connection etc. all complete as required .

Supplying and fixing wall / floor mounted cubicle panel board fabricated with 16 SWG MS sheet,suitable for panel mounted switch disconnector, including busbar chamber , insulator and Painting etc .as required. (but without busbar copper strip)

Providing and fixing 125 A 415 V cubical Switch Fuse unit inside the existing cubicle panel board with ISI marked HRC fuses including drilling holes in cubical panel ,making connection etc.as required.

S/F MCCB in cubicle panel board: Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.25/100 Amp, 16KA

S/F MCCB in cubicle panel board: Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 16KA

S/F MCCB in cubicle panel board: Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 Amp, 35KA

Supplying and fixing 200 amps. TPN , copper busbar complete with all acessories as required

Supplying and fixing 400 amps. TPN , copper busbar complete with all acessories as required

Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 meter length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required.

Earthing with copper earth plate 600 mm X 600mmX3mm thick including accessories and providing mansonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc . With charcorl /cock and salt as required. .

Supplying and fixing 4 mm dia copper wire on surface or, in recess for loop earthing along with existing surface/recessed conduit / submain wiring/cable as required .

Supplying and fixing of pilot lamp for indictor light ,connection,all complet e,as required

Supply of Decorative Ceiling Fan: Supplying and fitting of 1200 mm Sweep decorative model AC ceiling fan , including connection with 1.5 sq mm copper wire, down rod of standared length(upto 30cm) withall accessories as required. Make :- Polar/Bajaj/Crompton / Havells / GEC.

Supply of Metal Exhaust Fan 9"(230mm): Supply of 9"(230mm), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/Bajaj/ Havells/Crompton)

LED tube with Batten 18W/22W : Supplying and fixing of wall mounted LED 18W /22W tube + batten and electronic driver and accessories as required. ( Make -Wipro or Equivalent)

LED Bulb 9W/10W : Supplying and fixing of LED 9W /10W bulb and accessories as required. ( Make -Wipro or Equivalent)

Suppying and fixing indoor recess mounted 36 W LED flat panel luminaire suitable for armstrong /grid ceiling ,complete with electronic driver etc. directoy on false ceiling including connection with 1.5 sq.mm.FR PVC INSULATED copper conductor cable and earthing the body as required.

: Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cables in existing surface / recessed steel / PVC conduit as required (4 Pair)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required. 2 Module ( 78 mm x 78 mmx45mm)

: Supplying and fixing following modular type switch / socket on the existing modular switch/ socketon the existing modular plate& switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required. (20 mm)

S.I.T of IR Dome Camera,DIS HAD with 3.6 mm lense,1/3"IR DOME/CCD'2MP,0.1Lux(day),0 lux (night) Normal Auto GainDome IR DOME D/N. ( HIKVISION MAKE)

S.I.T of IR Bullet Camera,DIS HAD with 3.6 mm lense,1/3"IR Bullet/CCD'2MP,0.1Lux(day),0 lux (night) Normal Auto GainDome IR BULLET D/N. ( HIKVISION MAKE)

Supplying, installation & testing of Hikvision 16CH HD DVR -AH 16 SERIES

Supplying, installation & testing of UTP BALUN FOR HD CAMERA

S.I.T. of video surveillance Hard DISC 2 TB SATA

S .I.T.of Power supply for camara.

S I T of 32 inch LED Monitor. MAKE:- SONY.

Supplying and laying of CAT-6 Cable ( D-Link)

Supplying and laying of 25 mm pvc pipe witth acessoris.

Supplying and drawing CAT-6 PVC insulated and sheathed LAN cable through PVC concuit/cashing caping including connection, testing etc. as required.

Supplying and fixing RJ 45 Modem jack with shutter for computer on the modular plate & box including making connection, soldering etc. as required.

Supplying and fixing U/UTP RJ 45 Pach Cord 2 meter PVC factory made blue in colour.(make:-orthonics,legrand,panduit-paneet) etc.as required.

Supplying and fixing U/UTP RJ 45 Pach Cord 1 meter PVC factory made blue in colour.(make:-orthonics,legrand,panduit-paneet)etc. as required.

Supplying fitting , fixing and connection of Ethernet Un managed Switch along with AC power supply 16x10/100 LAN switch including necessary connection of CAT 6 UTP cable, as required.(Make:-Morteak,HP/Dlink/netgear)

Supplying fitting and fixing of D-Link 16 Port modular Patch pannel complete with all accessories , as required.

Supplying , fitting and fixing and connection of com Rack 9U .;Acessories:- PDU 230V AC-1 Nos ,Cable Manager PVC 1 No,mounting Hardware 1 nos ,Rack , all complete as required

Supplying installation , connection and testing of cubical type ups panel ,made of 16 gause steel sheet ,dust and vermin proof ,powder coatet paint ,compartlised ,lockable type ,comprising with following :- . 40A TPN MCB -2NO. OUT GOING 40ASPN 3 NOS.,volt meter, indicator lamp etc. all complete as required.

: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 NOS 3 pin 5/6 amps modular socket outlet and 2 NOS 5/6 amps modular switch, and 1 no. 16A sw. & socket for raw power ,connection, etc. as required. ( For light plugs to be used in non residential buildings.)

: Wiring for circuit / submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, singlre core cable in surface / recessed PVC conduit as required. 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire

: Wiring for circuit / submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, singlre core cable in surface / recessed PVC conduit as required. 2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, singlre core cable in surface / recessed PVC conduit as required. 2 x 6 sq.mm. + 1 x 6 sq. mm earth wire

Fire fighting equipment all complete job as per dirction of E/I.

AC work :- Supply and Installation, Testing & Commisioning of VRV System. 1. outdoor ounit 20 hp oud (top discharge- 2nos , 2. 1.tr. Round flow cassette unit = 7nos 3. 1.3 tr. Round flow cassette unit = 2nos 4. 1.6tr. Round flow cassette unit =3nos 5 . 2tr. Round flow cassette unit = 2nos 6 . 3.3 tr. Round flow cassette unit =2nos 7 . 4.0 tr. Round flow cassette unit =17nos as per direction of E/I

62.5 KVA 3 Phase Silent D.G. Set all job as per direction of E/I.

Solar Power all job as per direction of E/I.

Hospital Lift all job as per direction of E/I.

Demolist existing Building all job as per direction of E/I.

RCC Fire Tank all job as per direction of E/I.

GST 12% will be added on Total amount quoted by Contractor

Labour Cess 1% will be added on amount quoted by contractor including 12% GST.

Malti Enterprises