Certain repair to joinery, tilling, plumbing and allied services for married accn in Bharatpur line at Mil Stn Dharamshala

Amount

Taking down chowkhats or frames including shutters (wihtout taking off shutters from the frame) exc. 1.5 sqm but not exc. 4.00 Sqm each and removing from site, all as specified.

Taking down chowkhats or frames including shutters (wihtout taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, all as specified.

Taking down shutters not exc. 1.0 Sqm each and removing from site, all as specified.

Taking down shutters exc. 1.0 Sqm but not exc. 2.0 Sqm each and removing from site, all as specified.

2nd class hard wood (Sal/Hollock) plain, solid, straight chowkhats or frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints with one or more rebates, complete all as specified.

Factory made 2nd class soft wood (Sal/Hollock) 30mm thick glazed and skelton window/ventilator shutters rebated and prepared to receive glass gauge etc. (with out sash bar) divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any members, size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkhats, all as specified.

Factory made 2nd class hard wood (Sal/Hollock) plain framed, panelled 35mm thick shutters (two panels) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and and style as per IS-1003 (Part-I), 2003 kiln seasoned and chemically pressure treated, all as specified.

Aluminium, anodised, barrel tower bolts of extruded section 150mm long complete all as specified.

Aluminium, anodised, barrel tower bolts of extruded section 100mm long complete all as specified.

Butt hinges, medium weight, cold rolled, mild steel 100mm long, all as specified.

Butt hinges, medium weight, cold rolled, mild steel 75mm long, all as specified.

Anodized aluminium alloy handles, fabricated type, anodised of size 150mm, complete all as specified.

Anodized aluminium alloy handles, fabricated type, anodised of size 100mm, complete all as specified.

Aluminium alloy, anodised,sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified.

Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified.

PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, 25mm thick, finished even and rough to receive floor finishes, complete, all as specified.

M&L for mat finish (non skid), preminium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile ex. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

M&L for mat finish (non skid), premium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

M&L for glazed ceramic coloured tiles, premium class I grade, of size 350mm x 250mm x 7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick rendering in cement mortar 1:4 on surfaces of walls complete all as specified.

Taking down GI pipe of 15mm bore etc. complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor/wall complete all as specified.

-Ditto- all as per Srl item No. 21.00 above but refixing only.

S & F in repair WHB vitreous china (flat back or angle back type) 580 x 450mm excluding tap, waste, but incl bracket incl waste coupling of CP 32mm bore complete all as specified.

M&L vitreous china wash down water closet pan, (Pedestal pattern) white incl connection to drain and flush pipe including seat cover, CP jet and pipe complete (excluding flushing cistern and flush pipe) all as specified.

S&F PVC valve less, syphonic action type flushing cistern 10 litre capacity, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450mm long PVC connection fixed, in repairs, all as specified.

S&F vitreous chinaware squatting pan, '(Orissa pattern)' size 580mm x 440mm, white, with PVC 'P' or 'S' trap, front or back inlet, integral footrest complete all as specified,( excluding flushing cistern and flush pipe) and making good to floors in repair, all as specified.

S&F 15mm bore Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated fixed in repairs complete all as specified.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors or in trenches complete all as specified.

S&F in repair 100mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors or in trenches complete all as specified.

S&F in repair 75mm bore PVC (SWR) bends of any radius complete all as specified.

S&F in repair 110mm bore PVC (SWR) bends of any radius complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Dismantling of corrugated or plain steel sheeting of any gauge thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Dismantling of framed work timber scantlings 40 Sqcm and over in section, in any position complete all as specified.

M&L for 2nd class soft wood (Kail) as in scantling, framed work in ceiling, clean swan timber and fixed in any position complete all as specified.

Preparation surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as specified and directed.

Supply & fixing galvanized corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with L-type or J type hooks and washers, in roof, walls etc. with grade of zinc coating 275 gm/sqm complete all as specified and directed.

All as per item No. 37.00 here-in-above but except sheet complete all as specified and directed.

S&F galvanized plain mild steel sheeting 0.80mm thick as in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 gm/sqm complete all as specified and directed.

All as per item No. 39 here-in-above but except sheet complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Mild steel work as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work comforming to Fe-290 Gde E-165 complete all as specified.

Dismantling of unframed work timber scantlings 40 Sqcm and over in section, in any position complete all as specified.

M&L for 2nd class soft wood (Kail) as in scantling, unframed work as in verandah posts and like, clean swan timber and fixed in any position complete all as specified.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden based or wood surfaces of width or girth not exc. 10cm width or girth when unconnected with other painting or when painted in different tint including preparation complete all as specified.

Dismantling of wall & ceiling boarding (fibre, pulp, insulation etc., or insulation board/slab/blankets, any thickness, with nails, including cover fillets and removing from site all as specified and directed.

False ceiling using anodised aluminium T&L sections, snap grid frame work of size 605 x 605mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete with 4mm thick non-asbestos fibre cement board ISI marked Eboard colour coated and designed, complete all as specified.

M&L for 2nd class softwood plain fillets sectional area exc. 3 Sqcm and n.exc. 6 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails of brads complete all as specified.

M&L for 4mm thick non asbestos fibre cement plain building boards fixed to timber frame/GI/aluminium frame work fixed with nails as in ceiling flat or sloping, complete all as specified.

M&L for two coats of white wash on AC ceiling boards incl preparation, all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) form wooden frames or steel, concrete or brick surrounds, glazed with oil putty or fixed with beads, all as specified.

S&F for sheet glass 3mm thick ordinary quality and glazing with oit putty/wooden beads in squares, not exc. 0.5 Sqm in each pane, all as specified.

Mild steel galvanised wire cloth 0.56mm thick nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples or wooden beads, all as specified.

Two coats of synthetick enamel paint over a coat of pink primer on new wood or wooden based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified.

M&L for 12mm thick plywood BWR type BB fixed with screws to timber frame work as cup board shutter complete all as specified.

S&F continous (Piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flap welded to steel frame or screwed to wooden frame complete, all as specified.

S&F 100mm size hasp and staple safety type brass with mild steel hinges pin incl bolt to hinge plate and fixed with screws complete all as specified.

M&L for granite (of any type) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stsone over plate form incl grinding and polishing with 20mm thick screed bed in CM 1:4 complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey portions & no pigment complete all as specified.

KISHAN CONTRACTOR

M/S MADAN GOPAL and CO

VIJAY KUMAR LAKHNI