8475 REPAIRS AND MAINT OF DRAIN FENCING BOUNDARY WALL HARDSTANDING PATH ETC IN PCDA INS TRATA AND OTHER UNITS UNDER AGE BR II UNDER GE N) KUNJALI

Amount

Excavation in trenches not exceeding 1.50m in depth and not exceeding 1.50m width for foundation for sewage line etc. and getting out in soft/loose soil complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description & in any position not otherwise specifically provided for complete all as directed

Demolition and breaking up of old existing drain pipes (SGSW) set in cement mortar of size 150mm dia bore including PCC packing under and haunching against the sides of bottom pipes complete all as specified and directed.

Dismantling CI Pipes 100mm bore fixed to wall

Dismantling CI pipes 100mm bore jointed in CM and taking out of trenches

Dismantling PVC (SWR) Pipes 110mm bore fixed to wall/laid in trenches

Demolition of precast RCC manhole covers.

Taking down cement plaster on brick work surfaces etc.including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins etc. as in manholes and septic tanks complete all as specified and directed.

M&L for brick work with sub-class ‘B’ bricks, set in cement morter (1:4) straight or curved on plan, exceeding 6m mean redious as in manholes and septic tanks complete all as specified and directed.

M&L for rendering 15 mm thick, set in cement mortar (1:4), as on brick/concrete surface (fair face) in manholes, septic tanks etc finish even and smooth without using extra cement complete all as directed.

M&L for rendering 15 mm thick, set in cement mortar (1:4) mixed with WPC @ 3% (or as manufacture's instruction) as on brick/concrete internal walls surfaces of manholes and septic tanks complete all as directed. Note : WPC will be measured and paid separetaly.

Supply only intergral water proofing compound (WPC) of best quality

Material and labour for pre-cast RCC (1:2:4) type B-1 (using 20 mm graded aggregate)75mm thick, manhole cover slab, set in cement mortar (1:4) including all necessary form work complete all as directed

Material and labour PCC (1:4:8) type D2 using 40mm graded aggregate bed to drain pipes for 150 mm bore pipe including packing under, and hunching against sides and top of pipe after they are laid and tested completed all as specified and directed.

All as per item No 16 here-in-before but 100mm bore of pipe

S&F and laying in trenches of 150mm PVC (SWR) pipes heavy duty ( 6kg/Sqcm) inlcluding all fittings in any length with rubber ring joints.

M&L for 150 mm internal dia salt glazed stone ware drain pipe in trenches , jointed and pointed as specified.

S&F 110mm PVC (SWR) pipes heavy duty ( 6kg/Sqcm) inlcluding all fittings in any length with rubber ring joints fixed to wall.

All as per item No 20 but laid in trenches

S&F of 100 mm dia cast iron soil waste and vent pipe in any length with or without ears with cement joint laid in trenches.

All as per item No 22 but fixed to wall

Supply and fixing for TMT bars, 8mm dia and over, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in surface, channels and drains etc. complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in coping of manholes channels etc complete all as specified and directed

S&F in repair CI bend 100mm dia

S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest and inlc. "P" ro "S" trap complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc.

Supply and fix, vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.

S & F vitreous china bowl urinal flat back,size 465x355x265mm, white with grating and union for descharge pipe fixed complete to walls all as specified and directed.

Material and labour for cutting holes into or through full brick walls, built in cement mortar superficial area exc 150 sq cm but n exc 400sq cm and making good to disturbed surfaces as in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded aggregate) complete all as specified and directed.

Material and labour for cleaning and removing of sludge, soil mud etc from sewage pipe lines including manholes by rodding with MS rod/bamboo strips (tied with juts/emery bags) between manholes to manholes and inlc cleaning of "P" or "S" trap of bath room and WC and finally flushing down with water and removing sludge from manholes and depositing in trenches incld sprinkling of bleaching powder over the area of trenches and incl. necessary excavation and earth work in soft/ loose soil, complete all as specified and directed.

M & L for cleaning/de-silting of loose mud, rubbish etc from drain bed including uprooting of vegetative growth throughly and wire brushing including flushing with water so as to achieve smooth flow of water in drain of bed width up to 60 cm and any depth etc complete all as directed by Engineer in charge.

Returning, filling in trenches including spreading leveling, watering and well ramming in layers n.exc 25 cm thick each layer in soft/loose soil complete all as specified and directed .

Removing of surplus soil/excavated materials to a distance not exc 50 m away from the starting point and depositing where directed at a level not exc 1.5m above the ground level complete all as specified and directed

Material and labour for cleaning and removing of sludge soil mud of tank and removing the same to a distance not exceeding 50 meter away from the starting point and depositing in trenches/pit covered by ordinary soil of thickness not less than 30 cm from ground level at a given location up to 1.00 meter depth including sprinkling of bleaching power over the area of trenches and on the cleared septic tank including necessary excavation and earth work complete all as specified and directed Note: For purpose of measurement dry volume of sludge on pit shall be measured)

Cleaning the area, cutting shurbs, bushes etc around septic tanks, soakage well, drain etc.

Taking out existing of NT/floor trap C1 grating and cleaning of sludges/slit from NT floor trap incl roding CI pipe from NT/floor trap to gully trap etc in position incl removing of Rubbish to a distance not exc 100 M all as specified and directed.

Cleaning the blockage in IWC, EWC, incl roding CI pipe after opening the oval access door of CI bend C1 branch piece (T) etc upto first MH and placing the OAD in position & removing the rubbish to a distance n.exc 100m all as specified and directed.

Taking out of gully trap cover and CI grating and cleaning of sludges/silt from gully traps incl rodings SGSW/CI pipe from gully trap to 1st manhole length not exc 3 m) and placing back CI grating PCC cover etc in position incl removing of rubbish to a distance not exc 100 RM all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), clamps; hold fasts; wall ties; similar small articles conforming to Fe-290 Gde-E-165

Cutting of existing SWG drain pipe of any size in position after excavation incl jointing socket of new pipe to same with packing spun yarn with cement mortar (1:1) , including necessary excavation and refilling the earth all as specified and directed by E-in-charge

M&L PCC (1:3:6) Type C2 (usign 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius,built in CM 1:6.

Extra for forming fair finished drain 30 cm inner girth using extra cement including forms,moulds,mitred/stopped ends etc.

Add or deduct for each 25mm girth or part thereof over or under 30cm using extra cement including forms,moulds,mitred/stopped ends etc.

Cleaning and removing all scale and dirt, etc, from tanks 250 but n. exc 500 ltr capacity and from mouths of circulating pipes, etc

Cleaning and removing all scale and dirt, etc, from tanks n exc 250 litres and from mouths of circulating pipes, etc

S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms)

S&F in repair Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms)

M&L for cleaning of garbage bins by taking out solid waste/spoil and removing the waste materials outside MOD land including making good damaged surfaces with cement plaster (1:4) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.

M & L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,(600mm x 600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc.

S & F plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete in repairs

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair Pillar taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repair 20mm stop cock fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete

S & F in repair kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer.

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc.

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including dismantling of existing tank, all as specified in SSR Part-I.

-Ditto- all as per ser No 71 but 1000 ltr capacity.

S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and as directed by Engr-in- Charge.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing

-Ditto- All as per Item No. 74 above item but 20mm dia

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

-Ditto- All as per itemNo 76 above but 20mm dia

S & F PVC (SWR) multi floor trap 75mm dia with grating including joint with solvent cement

S & F in repair Chromium plated tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc.

Dismantling of fencing, wire mesh of any type, and in any position by unscrewing nuts, fillets, clamps complete all as directed.

Supply only chain link MS galvanised fencing of size 100 x 100 mm mesh and 10 mm guage all as specified and directed .

Fixing only chain link MS fencing including line wires, any mesh , size and type to any type of standards, rails, strainging bolts etc including provision of binding wire all as specified and directed .

S&F in repairs galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specifed (each line wire to be measured)

S&F in repairs barbed razor type concentrina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to 300 gms/Sqm, dia of coil when un-streched shall be 610 mm having minimum of coil (GI strip) 1.625 Kg/RM, hot dip galvanized razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos /RM) and special nut and bolts to hold two coils together and extra rows paralled wire of 10 gauge complete all as specified and as directed.

Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces over 10cm width or girth complete all as specified and as directed.

M&L for PCC 75mm thick 1:3:6 type C2 (using 40mm graded aggregate) as in pavement finished even and smooth without using extra cement complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x20cm x25mm thick ,with grey cement & pigment, set, jointed and pointed in neat cement slurry in floors over and incl. screed bed or bedding layer of mortar 15mm thick in CM (1:6)

M & L for sand filling 25mm thick under floors or in foundations including watering ramming and consolidation complete all as directed.

M&L of machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with Grey cement and pigment

M&L for Hard core of broken brick n.exc. 150mm thick of gauge n exc 63mm deposited spread and level, water and rammed to a true surface

M&L for coloured heavy duty paving tiles 10mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed cement mortar 1:4 complete all as specified.

M&L for PCC (1:4:8) D-2 using 40mm graded stone aggregate in sub base 75 mm thick

M&L for PCC 1:11/2 :3, type A 1 75 mm thick in floors complete all as specified.

M&L for Hardcore of broken boulders or stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface

M&L for forming Construction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound of Grade' A' complete all as specified and directed..

Removing demolished materials outside MD land to a distance exc 5Km but n exc 15Km complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulasion distemper al as specified and directed

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of Weather proof Acrylic based paint (100% Acrylic) with necessary scaffolding for high rise bldgs etc all as specified and directed.

SB CONSTRUCTION

Unitech Enterprises

SAIRAM CONSTRUCTION

SHREE JAGDISH FURNITURE CO.