REPAIR/MAINT FOR ELECTRICAL WIRING AND RELATED WORKS FOR OFFRs/JCOs/ORs MD ACCN AT MIL STATION TALBEHAT

Amount

Taking down carefully copper/Aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc. complete all as directed.

Taking down Distribution Boards along with MCB's incl removing the same from site and making good to the disturbed surface complete. Note: All taken down MCBs should be deposited to MES store by the contractor without any extra charge.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc. complete.

M/L for point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multistranded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick marked laminated sheet cover for fixing switches/socket/regulators and making good disturbed surfaces of wall, floors etc. for the following: Note:- On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 Amps controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per item NO 4.00 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor.

S&F Switch Piano Flush button single pole one way 5/6 Amp.

S&F Switch Piano Flush button single pole one way 15/16 Amp.

S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt.

S&F socket outlet 2 in 1 , 3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt.

S&F ceiling rose surface Bakelite 65mmx50mm 100watt three terminal.

S&F step type electronic fan regulator flush type on the existing phenolic laminated sheet.

S&F Lamp holder/Batten holder PVC/Polycarbonate insulated body with metal ring and back plate for batten fitting.

S&F Bell Ding Dong type, AC 230 Volts, Single pole.

S&F Bell Push, flush type, 5 Amp, AC-230 Volts, single pole.

M/L for modular point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multistranded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl modular sheet and plate for fixing switches/socket/regulators and making good disturbed surfaces of wall, floors etc. for the following: Note:- On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 Amps controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

S&F modular type switch single pole one way 6/10 Amp 240 volt.

S&F modular type switch single pole one way 16/20 Amp 240 volt.

S&F for modular type socket 2 & 3, 5 Pin 6/10 Amp with plate and cover, suitable for 2 module 240 volt.

S&F for modular type socket 2 & 3, 5 Pin 6/16 Amp flush type, with plate and cover, suitable for 2 module.

S&F modular type bell push single pole one way 6 Amp 240 volt.

S&F modular type fan regulator for 2 modules 100 watt, 240 volt.

M&L for sub main wiring concealed with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistranded and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit FRLS accessories of ISI marks medium grade including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly and making good to the disturbed surface complete. Note:- (i)One run of conduit three run of 6 sq mm copper conductor is measured as one unit. (ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories.

M&L for sub main wiring concealed with two single core PVC insulated of size 1.5 sqmm FRLS unsheathed copper conductor 1100 volt grade multistranded and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 20 mm external dia and conduit FRLS accessories of ISI marks medium grade including 1.5 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly and making good to the disturbed surface complete. Note:- (i) One run of conduit three run of 1.5 sq mm copper conductor is measured as one unit. (ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories.

S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with top and one single pole MCB of 20 Amp 240 volt and making good to the disturbed surface complete.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps 240 volts and making good to the disturbed surface complete.

S&F vertical sheet metal enclosure double door for MCCB DB Triple pole and neutral 4 way, (4+12) with 125 Amps rated bus bar 440 volts earth dolly IP-43, IK09, and making good to the disturbed surface complete.

S&F MCB SP 5 to 63 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F MCB SPN 20 to 40 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F MCCB 4pole 63 Amp, 440 volt 'C' series, 16 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

Supply and fixing LED 4' batten light 18/20 Watt 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED 2' batten light 9/10 Watt 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 6 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, lugs, complete in all respect, GI earth wire protected by 15 mm bore (light grade) galvanized iron pipe. Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.

Supply and laying or fixing in replacement GI tubes light grade 15 mm dia, on place of rusted GI pipe in support of earthwire, on roof/pole/wall/laid in floor/in trenches.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S Kharya Associates

M/S SHIVA TRADERS

M/S A.R BUILDERS

M/s Indu Enterprises

HARNAM SINGH ANIL SINGH