SPECIAL REPAIR/REPLACEMENT OF BER PUMP, MOTORS AND CONNECTED ACCESSORIES UNDER GE (SOUTH) PATIALA AT MIL STN PATIALA

Amount

Cleaining of sewage well from bottom by means taking out soild sludge/sewage wastage to be disposed out side MOD Land from the starting point all as per specified and directed by Engr-in-Charge. (Sze of well 5 to 7 metre depth , 6 to 8 metre dia approximate ) Sump well 5,6,7,11,12,13,14 & 15.

Supply ,testing, commissioning of Diesel engine pump wheeled trolly. Mounted size 150mm dia pipe suitable for pumping discharge-75 LPS Discharge,Self Start with suitable Battery, SP6L Pump Model as Head not less than 12 Mtr, waste disposel pump complete all as specified and directed by Engr-in - Charge.Make kirloskar / crompton greaves

Supply,testing,commissioing &installation of non clog submersible sewage pump cap 15 HP 3 Phase 415 Volts 50 HZ, on 21 mtr head, 32 LPS discahrge as per OEM specification complete all as specified & directed by Engr-in-charge . Make kirloskar / crompton greaves.

Supply ,testing,commissioing& installation of non clog submersible sewage pump cap 10 HP ,3 Phase,415 volts 50HZ , on 12 mtr head, 72000 LPH discahrge as per OEM specification complete all as specified & directed by Engr-in-charge. Make kirloskar / crompton greaves.

Supply ,testing,commissioing & installation of non clog submersible sewage pump cap 7.5 HP, 3 Phase , 415 volts , 50 Hz on 16 mtr head, 54300 LPH discahrge as per OEM specification complete all as specified & directed by Engr-in-charge

S&F of cast iron sluice valve 100 mm dia PN - 1.6 as per IS 780 with brass spindle and iron wheel head including providing new nut, bolt, washers and rubber insertion sheets on both ends complete all as specified and directed by Engineer-in-charge.

S&F of cast iron sluice valve 150 mm dia PN - 1.6 as per IS 780 with brass spindle and iron wheel head including providing new nut, bolt, washers and rubber insertion sheets on both ends complete all as specified and directed by Engineer-in-charge.

Supply and fixing heavy duty pipe including flanged on both ends MS steel , nominal dia 150 mm as per IS 3589 (1981) thickness 4.8 mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing heavy duty pipe including flanged on both ends MS steel , nominal dia 100 mm as per IS 3589 (1981) thickness 4.8 mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc tee places single branch. "Y" junction, double branch, cross (all sockets or socket and spigot collars, caps and plugs upto 150 bore in mm complete all as specified and directed by Engr-in-Charge.

MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc Nexc 10 Kg each brakets, conforming to Fe,290. Gde-E-165 (Brackets over 10 Kgs each to be measured under structural steel)

Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate making foundation for fixing of submersibal motor.complete all as directed and specified by Engineer-in-Charge.

Supply and fixing PVC insulated & PVC sheathed Industrial cable for Submersible motors of size 16 sq mm 415 volts complete all as directed and specified by Engineer-in-charge.

Supply and fixing PVC insulated & PVC sheathed Industrial cable for Submersible motors of size 10 sq mm 415 volts complete all as directed and specified by Engineer-in-charge.

Supply and fixing of Automatic Star Delta starter 3 phase, 415 volt for centrifugal pump set 15 HP with over load relay, contactor ML 1.5 magnetic coil duly fixed in enclosure having relay setting suitable for 15 HP pump set complete all as directed and specified by Engineer-in-charge.

Supply and fixing of Automatic Star Delta starter 3 phase, 415 volt for centrifugal pump set 10 HP with over load relay, contactor ML 1.5 magnetic coil duly fixed in enclosure having relay setting suitable for 10 HP pump set complete all as directed and specified by Engineer-in-charge.

Supply and fixing of Automatic Star Delta starter 3 phase, 415 volt for centrifugal pump set 7.5 HP with over load relay, contactor ML 1.5 magnetic coil duly fixed in enclosure having relay setting suitable for 7.5 HP pump set complete all as directed and specified by Engineer-in-charge.

Supply,& fixing installation, testing and commissioning 100 dia Non Return Valve including jointing and jointing material complete all as specified and directed by Engineer-in-Charge.

Supply, & fixing installation, testing and commissioning 150 dia Non Return Valve including jointing and jointing material complete all as specified and directed by Engineer-in-Charge.

Gurcharan Singh Enterprises

M/s Friends Engineering Works

SWAMI ENGINEERS

M/s badrinath Traders

AR CONSTRUCTIONS

NARINDER KUMAR SONS

Arneja Builders

M/S Mukesh Kumar Gupta

HG construction