Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.6 LAccepted-AOC | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹37.9 L+₹33,300 (0.89%)Rejected-Finance 21 GREEN ENCLAVE SULLAR PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹43.8 L+₹6.2 L (16.4%)Rejected-Finance C 33 3971 GALI NO 6 JALANDHAR CANTT 144005 | JALANDHAR | JALANDHAR | PUNJAB | 144005 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹45.1 L+₹7.5 L (20.0%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR SANDEEP KUMAR
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR/MAINT TO E/M INSTALLATIONS AND REPAIR TO INTERNAL EXTERNAL PLASTERING AND CEILING PLASTER IN MD ACCN UNDER AGE B/R-I GE N PATIALA
2023_MES_593836_1
GE(N)/TOKEN-27/2023-24
Open Tender
Civil Works
Item Rate
240 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹1 L
Yes
30 Jun 2023
8 May 2023
5 Jun 2023
8 May 2023
3 Jun 2023
22 May 2023
Amount
Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.
M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
M&L for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified & as directed.
Complete removal of existing treatment of any type/description such as cement base paint, external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.
Applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the wall care putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed.
Applying 02 coats of exterior emulsion paint /weather coat (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
M & L for complete removal by mechanical means for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint, including filling wall putty in minor holes/depressions, sand papering etc, complete all as specified & as directed by Engineer-in-Charge. Note for Item Nos.1.00 to 9.00 : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by Engineer-in-Charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.
M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying one coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint including filling wall putty in minor holes/depressions, complete all as specified & as directed.
Applying 01 coats of exterior emulsion paint /weather coat (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
M & L for preparing existing treated surfaces on walls by filling wall putty in depressions, sand papering etc and making the surface smooth and applying 01 coat with distemper oil emulsion (light shade) @ 20 sq.m/litre/1 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.
Applying acrylic wall care putty on internal surfaces of walls/ceilings (thickness vary as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed.
M & L for Applying two coats of oil bound distamper white or tinted over a coat of primer on walls incl one coat of primer over & incl preparation of plastered finished of wall complete all as specified and directed.
Preparation of new/Old plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.
M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes and two coat cement base paint, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
S&F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm complete all as specified and directed.
Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 125mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified and directed. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F factory made flush shutters 35 mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides with both faces are covered with decorative face veneer with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf ( Note :- Cost of butt hinge for shutter fixing with new chowkhats is included in item above .)
35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf ( Note :-Cost of butt hinge for shutter fixing with new chowkhats is included in item No 3 & 4 above . Cost of butt hinges for shutter fixing with old chowkhats is catered in this item including removal of existing damaged butt hinge .)
S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed all as specified and directed.
S & F Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.
M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed.
Repairs to gates of any description and size including taking down and repairs to pintle hinges welding if required and bedding in brick or concrete work and check for its movement align the shutter by means of hammering / welding/oiling, lifting the shutter by means of pully or crane by taking safety measuers including replacement of pintle hinges complete all as specified and directed.
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.
Dismentling mud phuska on roof and removing debris away from site complete all as specified and directed.
Scrapping surfaces of roof by wire brushing removing all loose dirt and cleaning and washing down the surgaces with water complete all as specified and directed.
M&L for PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45 mm to maintain a slope of 1:100 ,complete all as specified and directed.
M & L for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints, overlaps of joints shall be 75mm longitudianal and 100 mm on transverse direction etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.
M&L for Aluminium painting 2 coats per Sqm over a coat of primer on APP surface by using roller/brush as per manufacturer, complete all as specified and directed.
M& L for Flush pointing in cement mortar 1:3, to bricks laid flat or brick tiles in pavings, aprons etc, complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D2 for sub base complete all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, with gray cement and no pigment set, jointed and pointed in neat cement slurry in floors incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and complete as specified.
Supply and Fixing sheet glass ordinary quality 4mm thick area n.exc 0.50 sqm each complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M & L hardcore of gauge n exc 63mm deposited spread and leveled in layer not exc 150 mm thick water, rammed to true surfaces complete all as specified and directed.
M & L for PCC with type D-2 1:4:8 (40 mm graded aggregate ) 75mm thick as in sub base complete all as specified and directed.
M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed.
M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 12.5 graded stone aggregate) as in kerb stone 300x300x100mm with CM 1:4 , rounded or chamfered on edges complete all as specified and as directed.
S&F 15mm bib tap fancy brass chromium plated butter fly handle, screwed down, screwed for iron pipe or for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S & F for PVC(HDPE) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc including taking down existing damaged CI rain water pipe complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
TMT Bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 using 12.5mm graded stone aggregates as in shelves/counters etc complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 using 20mm graded stone aggregates as in Chajja/Parapet wall/Slab etc complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.
Form work for soffits of shelves/slabs/Chajja of flat surfaces rough finished n. exc. 200mm thick complete all as specified and directed.
Form work for sides/egdes of shelves/slabs of flat surfaces rough finished exc 50mm but n. exc. 100mm thick complete all as specified and directed.
M&L for Mild steel framed work of Fe-410-0 as in grills / guard bars shouldered/ welded with steel window / ventilators frames complete all as specified and directed.
M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and complete as specified.
Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed.
Complete removal of existing treatment of any type/description such as distempering work etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.
Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and priming plastered and other surfaces with alkaliresistant priming paint complete all as specified and directed.
Preparation of old plastered/ unplastered surfaces of Ceiling including cornices,pillasters etc by brooming down or steel wire brushing including filling up of holes/cracks using white correct/wall putty and removal of nails and applying one coat of white wash complete.
Preparation of old decorated plastered or unplastered surfaces of walls including bromming down or steel wire brushing , scrapping down smoke soot, moulds moss and efflorosecent salts and trading oil and greasy sports and including filling the nail holes/depressions by using filling compound of white putty to obtain even and smooth finish and applyning one coat of Oil bound distemper.
Preparation of old decorated, plastered and unplastered surfaces of walls facia,chajja,honey comb wall etc by brooming and steel wire brushing and applying one coat of cement base paint (up to height 12m) all as specified (Note : the item cover cement base paint of yellow colour wherever is required).
Preparation of old decorated surface of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.
Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
M/L PCC 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed
S&F MS hollow rectangular/square tubes/pipes of YST 310 Grade as in frame work for roofs/sheds/chajjas etc and like similar items including welding/fixed with conn plates etc. complete all as specified and directed.
M & L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of having TCT 0.45mm thick, rib height 28mm, Min. G300 Mpa Grade, pitch 200mm with 16mm step depth, colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteners/screws as recommended by manufacturer complete all as specified. Note : 1. End of the sheet factory molded 900 round (Minimum 30 Cm depth). 2. Fixing of sheets will be done strictly according as per manufacurer's instructions.
Preparation of new plastered, Old Plastered and unplastered surfaces of walls facia,chajja,honey comb wall etc by brooming and steel wire brushing and applying two coats of cement base paint all as specified (Note : the item cover cement base paint of yellow colour wherever is required).
Buttar Construction Co.
M/S Mukesh Kumar Gupta
Nanotech Construction
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .