Improvement of Daultabad road intersection with RMC M-40 road and installed Red light at junction in ward no. 11 under MCG (Re-Invited)

Amount

Cost of cable 1.0 sq.mm, copper flexible 6 core cable (junction box to lights). Make:- National, Havells,Polycab

Dismantling of RMC-40 Road 250 mm to 300 mm thick Complete in all respect

S/E of Microprocessore based reverse count down timer for ATC signals to depict the timings of RED straight or side Green Trimmings independently.MAKE BEL, Siemens, ENVOYS, PEEK.

Supply 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 MAKE BEL, Siemens, ENVOYS, PEEK. C- Green Arrow

Providing and Laying Separation membrane Sheet 125 micron thick imper able plastic sheet of approved quality of make IPCL, Shivalik or equivalent make, over the surface of DLC complete in all respects as per entire satisfaction of the Engineer-in-Charge.

Supply and erection of 2 Nos. tubular battery 12 volt, 100AH, and,1 No Invertor, MS iron water proof box for battery and controller system complete in all respect upto the satisfaction of engineer in charge of the work. Complete as per relevent IS/BS Standard.MAKE EXIDE,AMRON,SUKAM,LUMINOUS

S/E of metallc control cabinet of approximate the cabinet should be suitable to house Micro processor controller, master controller/ switching control.

Master Controller. It should be compatible with C-DAC ATCS Technology Microprocessor based controller including windows base software to be provided and installed along with CF system must have green signal conflict monitor unit. Controller must have RS 232 Serial communication Port for programming with provision for up gradation with GSM communication Later on with help of extra peripherals. Controller must function at least in following 3 modes. The product shall be as per relevant ISS and ISO-900/2000 compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. a) Manual mode , b) Auto Mode multiple day plan mode, day of the week and date of year. c) Vehicle actuated mode. The traffic signal control should be approved by CDAC, Ministery of communication and IT, Govt of India

Supply of Cantilever (6.5+0.5) = 7 mtr. long pole having dia 200 mm with a base plate is 320 x 320 x 20mm. pole sheet thickness is 4mm, with a suitable arm of (4+2)=6 mtrs with a thickness of 3mm having a top dia of 75mm, with suitable foundation accessories i.e. 25mm dia 4 nos 850mm along with junction box in pole with steel rope) specification and steel grading shall be as per BSEN 10025..Compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge.Make;- Paruthi,kasper,bajaj,shiva.

Supply of standard Hexagonal pole 4 mtr. Top dia 90mm, bottom dia 140mm, thickness 3mm with base pate 200x200x12mm with foundation accessories. Specification and steel grading shall be as per BSEN 10025 compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge.Make;- Paruthi,kasper,bajaj,shiva.

Installation, Testing and Commissing of red light

Providing & laying in position machine batched and machine mixed design mix M-40 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete. Improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation and plinth. (Note: Cement content considered in this item is @ 420 kg/ cum).The ready Mix concrete is to be procured from plants of ACC/L&T Birla/ Ultratech as approved by Engineer in Charge at Delhi or Gurgaon. The finishing of the laid cement concrete with the surface vibrator and mechnical trowel including cost arrngement and chowkidar etc complete in all respect.

Providing and making sawcut longitudinal joints between two lanes including cost of providing prtective coating of bituminous paint for 75mm

S/E of U/G cable one mtr. below ground level covered with sand and bricks including necessary connection digging and refilling of trenches 10sqmm x 2 core cable)

Supply 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 MAKE BEL, Siemens, ENVOYS, PEEK. A) Red Lights

Supply of jerssey barrier (JSB mono block type ) Using cement concrete M-30 mixed design as per MORTH specification including rainforcement as per drawing and painting two coats with ready mixed paint cover cement paint on RCC surface

Providing trench less cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road crossing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.

Construction of Concrete foundation for cantilever & Standard pole, RCC foundation 1:1.5:3 for size 600x600x1800mm with minimum 8nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more 200mm c.c for fixing the pole with all labour and material required to complete the job.

Cost of PVC insulated (Heavy Duty)under ground copper conductor 1.5 sqmm 12 core armoured cable suitable for A.T.C Signals 660:1100 volts below ground level in existing or in trench. Make:- National, Havells,Polycab

Extra for making rough surface of the concrete pavement of providing non slippery by mechanical cutter for safe playing of vehicles as per entire satisfaction of the engineer-in-Charge

Providing & Marking center line / Zebra Crossing with hot applied thermo-plastic road marking paint complete in all respects such as furnishing all labour, materials tools, equipments including all incidental costs necessary for carrying out the work at site conforming to the technical specification clause 803.4 of MoRT&H specification for road and bridge works (5th edition) 2013 as directed by the Engineer. centre line at a distance of 2 metre left and right side line zebra crossing

Providing and laying granular sub base (GSB) Grading-III SDS

Supply 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 MAKE BEL, Siemens, ENVOYS, PEEK. A) Amber Lights

Supply and erection of ms round mounting clamps for light set titeing of poles complete in all respect upto the satisfaction of engineer in charge of the work.

Bidder Name

Amount

Premchand Contractor(GSTN-06AEJPC4165M2ZC)

Narender Bhardwaj Contractor(GSTN-06AEIPB2526E1Z3)

M/s Brahma Construction(GSTN-NA)

Premchand Contractor

M/s Brahma Construction

Narender Bhardwaj Contractor

M/s Brahma Construction