DAY TO DAY MAINTENANCE AND MISC B/R REPAIR/ REPLACEMENT WORK AT AF STN ARJAN SINGH UNDER GE (AF) PANAGARH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm. as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in skirting/dado, steps, pillars, window sills, cooking platform laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including rounding edges of granite slab after dismantling of old unserviceable/ broken slab as directed by Engineer-in-Charge as required at site complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

M & L for 100 mm brass mortice lock two lever, vertical type fixed in door complete as in repair all as specified and directed.

M & L for 65 mm brass mortice lock two lever, vertical type fixed in door complete as in repair all as specified and directed.

S&F for door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete as in repair all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking down shutter and refixing the same complete as in repair all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or stainless steel wire staples as in repair complete all as specified and directed.

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty and steel pins or wooden beads in squares not exceeding 0.50 square metre in each pane, after hacking out old broken glass of any type and size from any position upto height of 3 strory building complete all as specified and directed.

S&F for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, after hacking out old broken glass of any type and size from any position upto height of 3 strory building complete all as specified and directed.

S&F for 4.8mm thick tined glass, any colour in squares n exc 0.5 Sqm after hacking out old broken glass of any type and size from any position complete all as specified and directed.

S&F for aluminium beading inculing gasket etc (fixing in existing aluminium door shutter) complete as in repairs all as specified and directed.

S & F for 150 mm length floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete as in repair all as specified and directed.

Repair to exisiting steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable condition complete all as specified and directed. (Note: Rates for all necessary requirement for this repair work are inclusive in this item)

S&F for 15mm bore fancy type chromium plated stop valves, cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed complete as in repair all as specified and directed.

S&F for 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed complete as in repair all as specified and directed.

M&L for 15mm dia bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.

S&F for 15mm bore fancy type chromium plated basin mixer hot and cold water screwed for wash basin, cast copper alloy with crutch or butterfly handle screwed for PVC Connection pipe or for brass ferrule and fixed complete as in repair all as specified and directed.

S&F for Brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union complete as in repair all as specified and directed.

S&F for brass chromium plated wall mixer , 3 in 1 for system with provision for both Hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete as in repair all as specified and directed.

S&F for PVC connection 15 mm dia with PTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed.

S&F for Brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete as in repair all as specifed and directed.

S&F for vitreous China wash basin, white, flat back, size 550 x 400mm including one pair mild steel bracket complete as in repair all as specified and directed.

S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete as in repair all as specified and as directed.

S&F fo 8mm dia, 1.5 m long flexible tube with wall hook CP brass health faucent (hand shower) fixed to angle valve with back flow preventer complete as in repair all as speicified and directed.

S&F for plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as in repair all as specified and directed.

S&F for soap dish fixed with including chromium plated brass screws and wooden plastic cleats complete as in repair all as specified and directed.

S&F for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as in repair all as specified and as directed.

S&F for vitreous China water closet Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests with loose cast iron or vitreous china earthenware, 'P' or 'S' trap, connecting pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed.

S&F for vitreous China water closet pan (squatt pan) pedestal pattern white with 'P' or 'S' trap including fixing seat and cover for pedestal pan, providing and fixing PVC valveless, syphonic action type, flusing cistern, low level, white, with inlet, ball valve, float and handle including brackets, brackets, chain and pull or lever handle, flushing piep of steel tube or polyethylene inclduing jointing to socket of flushing rim (with and including India rubber cone joint, if flushing rim connection is nozzle pattern) and connectiong pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed.

S & F for 32mm dia PVC waste pipe fixed to WHB/ sinks complete as in repairs all as specified and directed.

M&L for 40mm bore brass chromium plated waste coupling fitting for kitchen sink/WHB any type fixed complete as in repair all as specified and directed.

S&F for glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60 cm long complete as in repair all as specified and directed.

S&F for 125mm dia gratings with/without waste hole, fixed complete as in repairs all as specified and directed.

S&F for Rotational moulded polythylene water storage tank (ISI marked of multi layer) with float valve, plastic lid cover, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed.

S&F for Rotational moulded polythylene water storage tank (ISI marked of multi layer) with float valve, plastic lid cover, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete (Minimum weight - 210 gms) all as specified and directed.

S&F for 15 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 15mm dia GI pipe with fittings all as specified and directed.

S&F for 20 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 20mm dia GI pipe with fittings all as specified and directed.

Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ wash basin of the upper Qtr, in any position at any height upto 3 story building, complete including change of floor trap, PVC horizontal pipe embeded in floor in bathroom or kitchen making good to the damage portion of flooring, laying and matching with new tiles in the existing flooring complete all as specified and as directed by Engineer-in-Charge. Note:- (a) Find out main cause of leakage and take necessary steps to resolve/rectify. (b) Replace existing tiles with new tiles in case lakage through NT/FT. (c) The rate also include provision of new NT/FT. (d) The unit rate is also deemed to be included for reqd bonding chemcidcalls to arrest the leakage/seepage as direct by the manufacturer specification.

S&F for aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom nylon brush and provision of counter sunk holes for screws etc. included complete as in repair all as specified and directed.

Taking down PVC/CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F for 110mm bore PVC SWR bends with access door complete all as specified and directed.

S&F for 110mm bore PVC SWR vent cowl with access door complete all as specified and directed.

S&F for 75mm bore PVC SWR bends with access door complete all as specified and directed.

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete (1:3:6) type C1, using 20mm stone aggregate and connecting to waste pipe complete as in repair all as specifed and directed. (Note: cost of cement concrete work included in this item.)

Taking down Shutters of any description exc 1 sqm and n.exc 2.0 sqm for each leaf and refixing in same opening after cutting, adjusting and easing all as specified and directed

M&L for plain cement concrete type B-1 (1:2:4), (using 20 mm graded stone aggregates) as in mass concrete after demolition of cement concrete complete all as specified and directed.

M&L for 75mm thick PCC type C-2 (1:3:6), (using 40 mm graded stone aggregates) as in plinth protection, pavement etc. and finshed the surface even and smooth without using extra cement after demolition of existing cement concrete complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface, as in ceiling and finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed.

M&L for rendering 20 mm thick in cement mortar (1:4) in two layers (12mm +8mm) on external faces of brick wall or concrete surfaces, finished even and smooth without using extra cement with using approved LWPC on second layer (8mm) as per manufacturer instruction after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. (Note : Liquid water proofing compound shall be measured and paid separately).

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE.(Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

Supply only Liquid water proofing compound.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of new wall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primeras per manufacturer instruction complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

KOLAY CONSTRUCTION (BID ID -3321080)