TN15-182-PMGSY III 2020-2021 BATCH -I - 01 ROAD AT P.N.PALAYAM BLOCK IN- SALEM DISTRICT

Amount

1) MRL31 - Kerankadu to Muttal Forest Limit Via Kallur Pettimedu Km 0/0 - 3/5

Clearing and grubbing road land including uprooting wild vegetation,grass ,bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD Technical Specification Clause 201.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(subgrade using cut earth)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Gravel shoulder)

Picking the Existing Bituminous Surface to a Depth of 100 mm by Mechanical Means and addition of deficit aggrgate @ 50% for Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller to achieve the desired density.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per technical specification clause 401 grading III , Grading C

Providing layer spreading and compacting graded stone aggregate to wet mix macadam specifaction inculding premixing the material with water at OMC in mechanical mixer Pug mill carring of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub -base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density inculding lighting.

Providing, laying and spreading soil on a prepared sub-grade, pulverising, adding the designed quantity of cement to the spread soil, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired 7 days unconfined compressive strength of 1.7Mpa and to form a layer of sub-base as per Technical Specification Clause 404.

Providing, laying and spreading soil on a prepared sub-base, pulverising, adding the designed quantity of cement to the spread soil, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired 7 days unconfined compressive strength of 2.76 Mpa and to form a layer of base as per Technical Specification Clause 404.

Providing and applying Primer coat with Bitumen emulsion (SS-1) using emulsion distributor at the rate of 0.70 - 1.0 kg per sqm on the prepared granular surface treated with Primer cleaned with Hydraulic broom as per Technical Specification Clause 502.

Providing and applying Tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared granular surface treated with Primer cleaned with Hydraulic broom as per Technical Specification Clause 502.

Provding, laying and rolling of Open Graded Premix Carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregatees either using penetration grade bitument or emulsion to required line, grade and level to serve as wearing course on apreviously prepared bse, inculding mixing in a suitable palnt, laying and rolling with a three wheeel 80-100km staic roller capacity, finished

Providing and laying seal coat sealing the voids in a bituinous surface - laid to the specified levels, grade and cross fall using Type -A as per MORD technical Specification clause 510

Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.

Providing and laying of hot applied thermoplatic compound 2.50mm thick including reflectorishing glass beads @ 250 gms per sqm area , thickness of 2.50mm is exclusive of surface applied glass beads as per IRC :35 , The finished surface to be level uniform and free from streaks and holes etc complete as per MORTH & H Specification No.803

Logo Board

Name Board

Information Board

Maintenance Board

90cm Equilateral Triangle Cautionary Sign Board

60cm Circular (Mandatory) Sign board

Chevron Signs 90cm Octagon

Reflector

Kilometer Stone

200m Stone

Guard Stone

1.A) Construction of 1.50m span RCC Slab Culvert at Ch 0/050

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.B) Construction of 1.50m span RCC Slab Culvert at Ch 0/150

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.C) Construction of 1.50m span RCC Slab Culvert at Ch 0/330

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.D) Construction of 1.50m span RCC Slab Culvert at Ch 0/460

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.D) Construction of 1.50m span RCC Slab Culvert at Ch 0/580

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.E) Construction of 1.50m span RCC Slab Culvert at Ch 0/920

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.F) Construction of 1.50m span RCC Slab Culvert at Ch 1/110

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.H) Construction of 1.50m span RCC Slab Culvert at Ch 1/400

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.I) Construction of 1.50m span RCC Slab Culvert at Ch 1/620

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.I) Construction of 1.50m span RCC Slab Culvert at Ch 1/890

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.J) Construction of 1.50m span RCC Slab Culvert at Ch 2/260

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.K) Construction of 1.50m span RCC Slab Culvert at Ch 2/360

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.L) Construction of 1.50m span RCC Slab Culvert at Ch 2/510

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.L) Construction of 1.50m span RCC Slab Culvert at Ch 2/600

Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Providing and laying concrete for plain/ Reinforeced concrete in open foundations complete as per drawings and MORD technical specification Cuauses 802,803,1202 & 1203 M20 M15

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Below Sill

Above Sill

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specification Clauses 1002, 1010 and 1202

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Providing and fixing 20mm thick compressible fibre board in expansion joint complete as per dreeing and technical specifications

Providing and fixing tar paper for bearing

Backfilling behaind abutment, wing wall and return wall complete as per drawing & MORD

1.M) Construction of Protection Wall Km 0/0 - 1/0

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Supplying and Filling Foundation and basement with filling sand in layers not more than 15cm . Thick Well Ramed , Watered and Compacted Complete Complying With Standard Specification.

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

1.N) Construction of Protection Wall Km 1/0 - 2/0

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Supplying and Filling Foundation and basement with filling sand in layers not more than 15cm . Thick Well Ramed , Watered and Compacted Complete Complying With Standard Specification.

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

1.O) Construction of Protection Wall Km 2/0 - 3/0

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Supplying and Filling Foundation and basement with filling sand in layers not more than 15cm . Thick Well Ramed , Watered and Compacted Complete Complying With Standard Specification.

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

1.P) Construction of Protection Wall Km 3/0 - 4/0

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Supplying and Filling Foundation and basement with filling sand in layers not more than 15cm . Thick Well Ramed , Watered and Compacted Complete Complying With Standard Specification.

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M20

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing and laying concrete for plain /Rainforced Concrete in open foundations complte as per drawings and MORD technical specification clauses 802,803,1202, & 1203 M25

Providing weepholes in abutment, wing wall, return wall with 100mm dia AC pipe extending through the full widht of strucures with slope of 1(V) : 2(H) towards drawing face complete as per drawing and techinical specification

Routine Maintenance after completion of work the road sufrace and shoulder to be maintained in proper condition to make them free from excessive edge drop offs, roughness, scouring and pot holes and cleaning of surface drain including culverts for frre flow of water. Relettering name boards and K.M & H.M stone and other maintenance operation required to keep the road traffic worthly at all the time for the maintenance period for the following years. As per General condition of contract para 32.2.2

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

R Subramanian