SMART PERIODICAL SERVICES TO CERTAIN MES MD, OTM AND OFFICER MD ACCN INCL E/M INSTALLATION AT MIL STN SURANUSSI UNDER AGE (I) SURANUSSI.

Amount

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even and fair mixed with liquid water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Water proofing compound shall be measured & paid separately.

Material and labour for rendering 10 mm thick on internal surface of brick work or concrete surfaces in cement mortar 1:6 and finishing the surfaces even and fair without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick on internal surface of brick work or concrete surfaces in cement mortar 1:3 and finishing the surfaces even and fair without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete.

Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

Material and labour for cutting or uprooting grass on old plastered ,brick surface, removing rubbish off the premises, cleaning surface and preparing to receive new cement mortar plaster complete all as specified and directed.

Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Notes: Applicable for Ser item No 10 to 13 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.

Material and labour for applying one coat of oil emulsion distemper on old plastered surface of walls including preparation with using auto roller for making the surface unfirom complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plastered surfaces of walls/roof incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of cement base paint (simple/camouglage pattern) complete all as specified and directed

Material and labour for preparation of old painted wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for prepration of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint over roof sheet etc building height 6 to 9 mtr complete all as specified and directed.(spray painting)

M&L for writing letter of figures (block, Roman,ltalic, or Indian) n. exe 30 cm high (not in index hands/natural size) on buil;ding/ notice boards, including prepration and cleaning etc complete all as specified.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Use & waste of form work to soffit of suspended slabs such as roof slabs, floor slabs, landing & similar works not exc 200 thick (horizontal or sloping) complete all as specified and as directed.

Material and labour for TMT bar 10mm dia, cut to length, bent to required shape, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for RCC (nominal mix) M-20 (20mm graded stone aggregate) as in chajja complete all as specified and as directed.

S&F 110 mm dia PVC SWR type bends any radius complete all as specified

Ditto all as per item No above but 75mm dia etc all as specified

AAY KAY Constructions (BID ID -3336640)