WORK SERVICES FOR CERTAIN BUILDING AT AF STN GWALIOR

Amount

Surface dressing n.exc (not exceeding) 15cm deep and getting out in soft / loose soil, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

Excavation in trenches, n. exc 1.5m wide and n. exc 1.5m in depth for foundations and getting out in any type of soil, complete all as specified and as directed.

M&L for returning filling in including spreading levelling watering and well ramming in layers not exc 25cmcomplete all as specified and as directed.

M&L for removing excavated material exc 250M and n. exc 500 M and depositing where directed at a level n.exc 1.5m above the starting complete all as specified and as directed.

Removing excavated soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brick work with flyash' Bricks Old size straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M & L for 12 mm thick false ceiling, Armstrong SCALA RH-70 ceiling board with approved pattern (Make Armstrong or equivalent as approved by the GE) 600 x 600 mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T and angle section of size 25 mm x 32.5 mm x 1.6 mm as in main runner and wall angle to place along the desired level of false ceiling suspended with 4 mm dia suspender of suitable size and dash fastner to be provided at required distances, complete all as specifed and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of bricks work or concrete surfaces in wall CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of bricks work or concrete surfaces in wall CM 1:4 even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering on fair faces of bricks work or concrete surfaces in ceiling CM 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for three coats of white wash on new plaster surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for one coats of white wash on old plaster surfaces on wall including preparation of surfaces complete all as specified and as directed.

M&L for one coats of white wash on old plaster surfaces on ceiling including preparation of surfacescomplete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distember over a coat of primer complete all as specified and as directed.

M&L for 3mm thick wall care putty on wall, finished even and smooth, complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing)removing servicable tile to store and rubbish of the permises, complete all as specified and as directed.

M&L for ESD PVC vinyl flooring 2 mm thick having carbon backing alongwith carbon particle chips having chemical and physical charactristics as specified in EN ISO 23997, EN ISO 24343, EN ISO -23999 and static electric charge < 2 KV including copper strip laid in grid 0.60 x 0.60 m and fixed with approved adhesive over existing flooring all as per manufacturer's instruction. Make-Tarket , Model- TORO SC LIGHT BLUE COM or equivalent as approved by the GE, complete all as specified and as directed.

M&L for first or premium quality Vitrified Ceramic tiles 10 mm thick double charged / Ultra charged (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for first or premium quality Vtirified Ceramic tiles 10 mm thick on vertical surface such as skirting (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for first or premium quality Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for first or premium quality Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for first or premium qualityglazed Coloured ceramic tiles on vertical surface 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified including backing coat 10mm thk in CM 1:4 complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM 1:4, complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each, with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but not exc. 4 sq. m each, with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store - Bore of pipes 15mm , complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store - Bore of pipes 20mm, complete all as specified and as directed.

S&F Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors - Bore of tube 15mm , complete all as specified and as directed.

S & F Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors - Bore of tube 20mm , complete all as specified and as directed.

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls - Bore 110mm, complete all as specified and as directed.

M & L for Cutting salt-glazed stoneware drain pipe in position, including supplying, fixing and jointing double socket to old pipe, and jointing spigot of new pipe to same with packed spun yarn and cement mortar 1 : 1 for Internal dia of pipe 150mm , complete all as specified and as directed.

S&F Vitreous China,pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover for pedestal pan , complete all as specified and as directed.

S&F as in repair Coloured Toilet paper holder of vitreous china box type fixed to walls with chromium plated (CP) brass screws , complete all as specified and as directed.

S & F in repair Vitreous China half stall white , with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.

S & F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps,waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

S & F Vitreous China soap dish size 160 x160x 90mm fixed to wall , complete all as specified and as directed.

M & L for Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' - Size of gully traps 125 X 100mm, complete all as specified and as directed.

S & F Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for Bore dia of pipe 15mm , complete all as specified and as directed.

S & F Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed - Bore dia of pipe 15mm c, complete all as specified and as directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified and as directed.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) -, complete all as specified and as directed.

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) , complete all as specified and as directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) , complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S & F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) - Diameter of outlet 100mm , complete all as specified and as directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement , complete all as specified and as directed.

S & F Chromium plated Angle Stop valves, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in repair Bore dia of pipe 15mm , complete all as specified and as directed.

M & L Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed - Bore dia of pipe 20mm , complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , complete all as specified and as directed.

S&F of solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening a, complete all as specified and as directed.

M&L for Aluminium anodised, barrel tower bolts of extruded section and fixed - Length of bolt - 150mm , complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised Size of handle 150mm , complete all as specified and as directed.

S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 Size of hinges 100mm , complete all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 , using 20 mm graded stone aggregate in plinth beams , complete all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 , using 20 mm grded stone aggregate in lintel beams , complete all as specified and as directed.

M & L for use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc - Rough finished surfaces of concrete - Curved, complete all as specified and as directed.

M & L for use and waste of form work to sides of concrete foundations, footings, plinth beams and similar work , complete all as specified and as directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips - TMT bars, complete all as specified and as directed.

M & L for Mild steel TMT bars 8mm to 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and as directed.

S&F for steel rolling shutters, thickness of laths 1.25mm with out ball bearing, as specified including top cover anchoring rod, hasp and staple and one shop coat of primer ; erected in position and indicated, complete: including gear operated type with chain wheel and hand chain, complete all as specified and as directed.

S&F safety lever lock mild steel with 4 levers for rolling shutters, complete all as specified and as directed.

S&F for ball bearing for rolling shutter, complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated , etc) sheets in roof covering fixed with L hooks or crank bolts , complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 , complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete in plain or curved portion , complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall with L-type or J-type or cranked hook bolts in lieu of screw , complete all as specified and as directed.

S&F of PVC (SWR) bend any radius 110 mm bore , complete all as specified and as directed.

S&F of PVC (SWR) bend any radius 75 mm bore , complete all as specified and as directed.

S&Fof PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm dia laid in trenches or floors , complete all as specified and as directed.

S&Fof PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm dia laid in trenches or floors , complete all as specified and as directed.

S&F 40 mm low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm, complete all as specified and as directed.

S&F 32 mm low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm for WHB, complete all as specified and as directed.

S&F as in repair of PVC valveless syphonic action type flushing cistern 10 ltr capacity low level ,white with inlet,ball valve float and handle including flush pipe & brackets, complete all as specified and as directed.

M&L for providing cement concrete type B-1 ,1:2:4 ( 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates,kerbs not providedfor in Item 04028, watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and as directed.

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment alongexternal wall where the apron is not provided using chemical emulsion at the rate of 7.5 litre per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding etc , complete all as specified and as directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete , complete all as specified and as directed.

M & L for Fe 290 (Gde-E-165) Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including all fitting , complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Dia of neck 11 to 15mm, complete all as specified and as directed.

S&F flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165, complete all as specified and as directed.

M & Lfor Preparing new surface of steel over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan, to any radius, in half brick thick walls, built in cement mortar 1:4, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B -2 (40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

Demolition of un reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M & L for PCC 1:2:4, 25mm thk using 12.5mm graded aggregates as in sub base, complete all as specified and as directed.

M&L for preparing old plaster surface of wall and applying one coats of cement based paint , complete all as specified and as directed.

M&L for Preparing new plaster surface of wall and applying two coats of cement based paint over a coat of primer , complete all as specified and as directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed.

M & L for Cutting chases,pinning in making good of stone concrete block walls to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills,sunshades,shelves,lintels etc.and cutting chases for concealed conduit wiring ,etc and making good cutting not exc 10cm girth, complete all as specified and as directed.

S&F of gun metal globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe, complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank white in colour 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position, including brass valve 20mm bore high pressure with polythene float and fly nut, complete all as specified and as directed.

M&L for preparation of Old plastered surfaces of walls and applying one coat of oil bound distemper, complete all as specified and as directed.

M & L for use and waste Formwork to faces of walls, parapets and staircase railings and similar work for rough finished surfaces of concrete , complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B1 , using 20 mm graded agregate as in surface channels and drains, complete all as specified and as directed.

S& F for Framed work such as grills, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165 , complete all as specified and as directed.

M & L for Mild steel Plates plain or chequerd 5 mm thick or over in thickness in available size Fe 290 Gde E-165 , complete all as specified and as directed.

M&L for preparation of new concreate surfaces of walls and applying three coat of white wash , complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type -C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete , complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type -B-1 using 20mm graded stone aggregate as platform including necessary formwork, complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L Brick work with sub class "B"' Bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of bricks work or concrete surfaces in wall CM 1:4 in internal wall. even and smooth without using extra cement , complete all as specified and as directed.

S & F Powder coated anodised three track aluminium sliding window(ALSW/18) or as per site requirement including all necessary fittings such as roller, rubber beading locking arrangement clit , glazing, guazing etc, complete all as specified and as directed.

S & F powder coated aluminium deco grills of approved make. Weight of grill 3.80 Kg per Sqm appx including frame alaround, fixed to window opening with necessary fixing arrangement , complete all as specified and as directed.

S & F Powder coated anodised aluminium door (ALD/10 or as per site) incl 6mm glass of make Modi/Atul and partly/fully fixed with PVC sheet fixed with aluminium snap beading and rubber gasket and necessary joining cleats, glazing clips,rubber neoprene packing, Each shutter fitted with one 04 lever mortice lock, tower bolts, handles and one hydraulic floor spring of approved make , complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer of same emulsion over 3 mm thick JK/Birla wall care putty , complete all as specified and as directed.

S & F Powder coated anodised aluminium ventilaors including glass panes ,gauge and all necessary fittings , complete all as specified and as directed.

Taking down carefully existing unserviceable aluminium/copper point wiring of any description & in any position with and including existing wooden battens/ conduits fixed on surface or concealed and all fittings including sunken /surface boxes & terminal boxes of any description, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including sunken boxes / junction boxes and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed.

M & L for point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC conduit with accessories as Concealed conduit wiring with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge for the following :-

(a) One Light/fan/bell point controlled by one switch.

(b) One 3,1 pin 5 amps socket out let on independent board.

All as per Srl item No 117 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on same board

All as per item No117 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase and neutral with 2.5 Sq mm green PVC insulated cable as earth for 15 amps socket point on independent board controlled by one switch.

Supplying & fixing switch socket outlet combination multi purpose,flush type, 5Amp/ 15 Amps 1,3 pin, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing switch socket combination,3 pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing ceiling rose polycarbonate body three terminals, complete all as specified and directed.

S&F ceiling fan regulator step type, AC,230 volt, complete all as directed by Engr- in -charge.

Supplying & fixing switch poino flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.

Supply and Fixing ceiling fan 1200mm sweep, 5 Star rated, with 3 Blades, suitable for 240 V AC complete with down rod, fan connector, fan clamp etc. and connecting up with ceilling rose by providing three core PVC insulated multi stranded flexible round copper conductor cable of size 1.5 sqmm of required length from ceilling rose to fan all as specified & directed. Make : Crompton (model : Aura plus-5 star) Orient (Model : Energy star) Standard (Model : Super Speed 50).

Supply & fix Heavy duty Exhaust Fans, Metal body, suitable for AC single phase 230/ 240 V of size 300 mm sweep 1400 RPM with louver complete all as specified an directed. Make :- Usha (Model : Aeroclean plus) Orient (Model : HD EX Fan ) Bajaj (Model : Supreme DLX)

M & L for submain (single phase) wiring complete with and including 4.0 sqmm two single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit concealed wiring of suitable size including accessories and fixed on walls and 4 sqmm FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) Two runs of 4.0 sqmm PVC insulated wire and one run of 4.00sqmm wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (single phase) wiring complete with and including 4.0 sqmm two single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit surface wiring of suitable size including accessories and fixed on walls and 4 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) Two runs of 4.0 sqmm PVC insulated wire and one run of 4.00sqmm wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 6.0 sqmm X 4 single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit concealed wiring of suitable size including accessories and fixed on walls and 6 sqmm 2 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of 6.0 sqmm PVC insulated wire and 2 run of 6.00sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 6.0 sqmm X 4 single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit surface wiring of suitable size including accessories and fixed on walls and 6 sqmm 2 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of 6.0 sqmm PVC insulated wire and 2 run of 6.00sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 10.0 sqmm X 4 single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit concealed wiring of suitable size including accessories and fixed on walls and 10 sqmm 2 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of10.0 sqmm PVC insulated wire and 2 run of 10.00sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 10.0 sqmm X 4 single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit suraface wiring of suitable size including accessories and fixed on walls and 10 sqmm 2 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of10.0 sqmm PVC insulated wire and 2 run of 10.00sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 4 sqmm X 4 core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit 25 mm bore ISI marked concealed wiring including accessories and fixed on walls and 4 sqmm 1 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of 4 sqmm PVC insulated copper cable for 3 phase and neutral,1 run of 4 sqmm earth wire and one run of PVC conduit 25 mm bore shall be measured as one unit length.

M & L for submain (three phase) wiring complete with and including 16.0 sqmm X 4 single core, FRLSH PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit surface wiring of suitable size including accessories and fixed on walls and 16 sqmm 2 Run, FRLSH, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) 4 runs of 16.0 sqmm PVC insulated wire and 2 run of 16.00sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

Supply, install and testing combined metal earth plug & socket panel made of 2mm thick CRCA sheet of suitable size, front opening with hinges duly painted with two coats of synthetic enamel paint over a coat of primer for housing and including metal earth plug & Industrial socket triple pole with neutral, 5 Pin, with 32A TPN MCB - 1no, metal earth plug & Industrial socket single pole with neutral, 3 Pin, with 16A SPN MCB - 2nos (UPS supply - Red Line I).

Supply, install and testing combined metal earth plug & socket panel made of 2mm thick CRCA sheet of suitable size, front opening with hinges duly painted with two coats of synthetic enamel paint over a coat of primer for housing and including metal earth plug & Industrial socket triple pole with neutral, 5 Pin, with 16A TPN MCB - 1no, metal earth plug & Industrial socket single pole with neutral, 3 Pin, with 16A SPN MCB - 2nos (UPS supply - Yellow & Blue Line).

M&L for providing down rod of required length for ceiling fan, made out of MS tubing, 15mm dia heavy grade duly painted with synthetic enamel paint over a coat of red oxide primer including necessary cutting/making holes etc complete all as directed.

S&F full glow fully diffused Recessed mounting LED light fitting 2' x 2' , 36 Watts with diffused acrylic cover complete with all accessories and making connection by using suitable length of three core flexible copper cable of size 23/0.0076 of 30 W complete all as specified and directed. Make : Philips (Cat part No RC380B LED36S 6500 G4 L60 W60 PSU OD OC) / Bajaj ( Cat No : BZRSQL 36W GZi CW) / Crompton (Cat No : LCTLRNE-36-FO-CDL)

Supply and fixing Lamp holder, PVC/Polycarbonate type with Back Plate suitable for LED bulb, complete all as specifdied and directed.

S & F 12 watt LED Bulb complete all as specifed and directed

S & F sheet metal enclosure MCB DB, double door vertical type TPN 12 way with 100 Amps rated bus bar, complete all as specifed and directed

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 100 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete .

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 4 Way with 100 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

S & F DB TPN sheet metal enclosure double door suitable for (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

Supplying & fixing in repair MCB TPN 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB TP 40-63Amps, 415 volts breaking capacity 25 KA complete all as specified and directed.

Supplying & fixing in repair MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing in repair MCB SPN 40-63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.

S&F MCCB 125 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.

M & L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x6.3 mm thick buried directly in ground vertically earth pit not less than 2.25 meter deep below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI earth wire of size 4mm dia upto 7.5 Mtr long from earth point to test point by means of bolts, nuts and washers all as shown in electrical plate no 3 of MES Shedule part I (2009) with connected to earth test point including adequate quantity of charcoal dust and common salt PCC ( 1: 3:6) type C-I chamber and for earth pit with 40x40x6mm mild steel angle iron frame for cover precast RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 8 mm dia round bars both ways with MS handle 8mm dia PGI funnel and wire mesh 20mm dia GI pipe medium grade for watering and 15mm dia light earth lead protection pipe complete all as specified and directed:

M & L for Earth continuity conductor with copper 20 x 3mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. all as directed.

Supply & fixing PVC slotted cable tray of size 75mm width x 75mm depth in 2-3 mtr length with closed cover fixing on wall surface with necessary fixing materials for drawing power cables,AFNET cables and system data cables all as directed.

Supply & fixing PVC slotted cable tray of size 100mm width x 75mm depth in 2-3 mtr length with closed cover fixing on wall surface with necessary fixing materials for drawing power cables,AFNET cables and system data cables all as directed.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, and making good, cutting not exc 10 cm girth.

M & L for point wiring for 3 pin socket outlet 15Amps (point wiring for ACs) with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 4.0 sqmm 1100 volts grade drawn through and including suitable size of PVC conduit with accessories as surface conduit/ consealed wiring with 2.8 mm thick laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 4.0 sqmm fire FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge.

S & F Modular PVC enclouser with plug and socket with a two pin and earth plug and socket,240V , AC complete with one single pole MCB of capacity 20 Amp complete all as specified and directed by Engr-in-charge.

Supply and fix voltage stabiliser for automatic operation , single phase naturaly air cooled indoor type and designed for input variation between 170 to 270 volts with out put voltage stabilised at 230 volts with accuracy +/- 1% , Operating frequency 50 Hz, Response time <3 msecs, Operating Temperature 0-55 Degree C ,Duty of operation Continuous at 100% , Rate of Correction 15 to 40 V / Sec and of capacity 3 KVA.

Supply and fix voltage stabiliser for automatic operation , single phase naturaly air cooled indoor type and designed for input variation between 170 to 270 volts with out put voltage stabilised at 230 volts with accuracy +/- 1% , Operating frequency 50 Hz, Response time <3 msecs, Operating Temperature 0-55 Degree C ,Duty of operation Continuous at 100% , Rate of Correction 15 to 40 V / Sec and of capacity 4 KVA.

Supply, install, testing and commissioning Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 40 KVA and all as directed.

Supply, install, testing and commisioning of Micro processor based 10 KVA capacity of Static Fequency Convertor (SFC) of input voltage 340-440 Volts, 3 phase, 50 Hz + 2 Hz, output supply voltage 208 Volts, 3 phase, 400Hz + 0.1 %, with Programmable controle for output voltage & frequency adjustment with passward protection, SMF batteries for 30 minutes backup along with battery stand & battery interconnecting cables with tolerance on voltage + 1% volts , harmonic distortion less than 5 % for linear load complete with protection for rectifier- input overload voltage/ under voltage,single phase failure, Reverse phase sequence, DC under voltage and protection for inverter output over voltage/under voltage,Overload ,Short circuit,Over temparature,Over frequency. LCD display for input output voltage, current, frequency and Output -output voltage, Current frequency , MIMIC indication and audio alarm for input mains On/high/Low/Single phasing/Fail , Dc On/High and output inverter On/High/ Low/Overload /trip complete with necessary MCCB control for input and output and On/Off Key switch suitable for operation upto 45 deg. celsius and 95% RH with Forced air cooling arrangement and noise level not exceeding 65 db complete.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the Galvanized iron strip of size 32x6mm upto 7.5 Mtr long from earth point to test point by means of bolts, nuts check nuts and washers of galvanized iron and steel Galvanized iron strip of size 32x6mm protected by provision of GI medium gread pipe 40mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh, test point and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -3 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

S & F air termination, single pointed, copper rod, 12 mm dia and 300 mm long, complete all as specified and directed by Engineer-in-charge

M & L for providing test point terminal block made out of Gun metal or phosphorous bronze of size 75 mmx75 mm x25 mm drilled and screwed including 03 nos 8 mm dia 25 mm long hexagonal head screws complete all as specified and directed

Material & labour for GI water tubing light grade,40 mm bore, duly threaded on one side for fixing socket as in air termination stand/post at roof top of building as specified & directed .

Supply and fixing GI socket 40 mm bore, 75mm long on vertical pipe post/stand complete all as specified and directed.

M & L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate, complete all as specified and direceted.

S&F GI tubing light grade 50mm dia for mechanical protection of earth continuity conductor complete all as specified and as directed by Engr-in-charge.

Supply and fixing earth continuity conductor or main earthing lead 32x6mm GI strip laid in pipe/fixed on walls or any other postion including jointing by GI nuts,bolts and washers in addition to brazing at every joint complete all as specified and directed.

Supply, fixing & connecting copper earth strip 20x3mm as in roof conductors/ down conductors fixed on walls/roofs with saddles & appoxy insulator including screw requried at site complete all as specified and directed.

Supply, installng, testing and commissioning Indoor type, step down transformer, 11 KV/433 Volts (at no load) AC 3 phase 50 Hz, 250 KVA capacity, coretype, copper wound, on HV & LV oil immerse, naturally cooled, oil natural - Air Natrual (ON AN), with external cooling tubes, delta connected on primary side (Hv) and star connected on secondary side (LV) and having 7 step tappings at +/- 2.5% of each step to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 45 degree celsius in oil and 55 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on ambient temp of 40 degree celsius. The transformer shall be in accordance with IS-1180 Part -I 2014 and shall comprise of the following:-

(a) Cable box on both HT & LT side consisting of porcelain bushing with copper / brass rods, complete with nuts and washers, with cable glands suitable for taking out LT supply. The size of cable box at LT side should be suitable for terminating 3 Nos 3.5 C185 Sqmm Armoured Aluminium Cable.

(b) Oil conservator with filter type drain valve and oil level gauge.

(c) De-hydrating breather with first fill of dehydrating agent (silica gel).

(d) Explosive vent, Thermometer pocket on tank cover, oil level gauge, oil drain filter valve, lifting lugs/hooks, oil filling hole with cap/plug with connection plate complete, air release valve plug and four nos plain solid cast steel detachable rollers.

(e) One No 100 mm dia, dial type thermometer, vapor pressure type, having range 0-0120 degree celsius with metal guard having maximum perimeter temperature reading indicator with re-setting device.

(f) Two earthing terminals on tank cover to facilitate fixing of 50x6 mm galvanized iron earth strip for earthing of body.

(g) Rating plate and terminal marking plate.

(h) Extra bushing for Neutral, in the LT cable box for connecting independent set of earthing for neutral.

(j) First filling of new and unused transformer oil, IS-335 marked make Power oil/power link filtered and tested up to 60 KV dielectric strength at 2.5 mm air gap between testing electrodes.

S&F Load Break Switch (LBS), HT 11 KV, with integral earth switch & fuse trip confirming to IEC 60265 /IS 9220, Indoor type 2.0mm thick CRCA M.S sheet enclosure with following specification :- a) Panel type designation- CSH 12 rated system voltage 12 KV b) Rated current rating 400 amps c) Nominal system voltage - 11 KV, 50 Hz d) One minute power frequency voltage withstand level -28 KV RMS. e) 1.2/50 micro second impulse voltage withstand level - 75 KV peak f) Type of Insulation - Air insulation, 3 poles g) Rated short time withstand current 25 KA/3 Sec h) Rated short circuit breaking capacity - Not assigned. HT HRC Fuses of 25 KA used to break SC current and trigger the tripping mechanism of load break switch. i) Rated Short Circuit making capacity - 62.5 KA. j) Cable termination - Incoming / Outgoing cables entry/exit from bottom. k) Type of operating mechanism - Quick make, Quick break, manual spring assisted toggle. l) Type of Installation - Indoor Type, Floor Mounted m) Degree of protection - IP 54 n) Paint type and shade - Epoxy based powder painting to shade RAL 7032 Note : Any item missed out above but is technically required for safe and proper operation of equipment, shall deemed to be included in the quoted rate.

Supply & fix LT switch gear 440 Volts 3 phase, 4 wire 50 cycles, cubicle or truck type complete with Air Circuit Breaker (ACB) 4 pole, suitable for 3 phase 4 wire system having double break main contacts and of rating 1250 Amps with breaking capacity 65 KA, Electrical Draw Out Type,Breaking time not more than 30 mili seconds complete with all standard accessories like overload protection, no-volt release with necessary CTs,meter and cable boxes of rating upto 800 Amps

Supply, laying, connecting and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 Volts grade of size 3 core 95 sq mm.

Supply, laying/connenting in trenches, connecting and testing LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6.0 sqmm x 2 core all as specified and directed

Supply, laying/connenting ,connecting and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm x 3.5 core

Supply,laying/connenting ,connecting and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm x 3.5 core

Supply, laying/connenting in trenches, connecting and testing LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm x 3.5 core all as specified and directed

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure

Cutting the existing road/hard standing etc of any description of surface and excavation in trenches 30cm wide and 60cm depth for laying of UG electric cable and all as directed. (The rate includes returning, filling, watering and ramming in layers and making good the surface as the exisiting after laying of elctric cables)

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks and all as directed.

Supply and fixing GI tubing light grade 50mm dia for protection of cable on wall , road crossing, floor etc complete all as specified and as directed by Engr in charge.

Supply and fixing GI tubing light grade 80mm dia for protection of cable on wall , road crossing, floor etc complete all as specified and as directed by Engr in charge.

M&L for chemical earthing with copper earth plate electrode 900x600x5mm burried directly in earth pit not less than 2.25 mtr below normal ground level and complete size of pit 1.6 mtr x 0.61 mtr earth plats connected to copper strip 32x6 mm by means of copper/brass nut, bolt duly brazed earth strip protected with 40 mm bore medium grade GI pipe from electrode and up to and including the earth test point of gun metal/ phosphorous bronzed of size 75x75x25m 15 mm bore watering pipe medium grade GI pipe including funnel wiremesh providing alternate layer of 10 cm each charcoal and magnesium sulfate layer up to 1.20 mtr and including excavation, returning in filling, removal of surplus soil to a distance not exceeding 50m, PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate RCC cover 40 mm thick in RCC (1:2:4) type B-1 using 20 mm graded alone aggregate reinforced with 8 mm dia MS deformed bars @ 100 mm both ways including MS handle of 12 mm dia round bar etc to be placed on and including angle iron frame made of section 40x40x3 mm of angle iron complete all as specified. Note :- Copper strip and protection light grade GI Pipe up to 7.5 mtr shall deemed to be included in the rates quoted by contractor.

Supply, install, commisioning and testing LT Panel Board manufactrured by CPRI approved manufacturer factory made indoor cubical type, 3 phase, 4 wire, 440 volts, 50 Hz, dust and vermin proof, IP 54 floor mounted, having 600 Amps copper busbar chamber. The panel board shall made of 2mm thick CRCA sheet with using 40x40x5mm thick angle iron frame and support duly painted using two coats of synthetic enamel paint over a coat of red oxide primer all as approved by the GE with the following switch gears and control. Note :- All incoming and outgoing switches/ MCCBs are to be connected with busbar through proper size of copper conductor.

a) MCCB, 400 Amps, 4 pole 415 volts, 50Hz, AC supply, 25KA breaking capacity, adjustable type - 1No. Make ABB/Seimens/Legrand (Main incoming)

b) Anodised copper busbar of suitable length mounted on insulator of 600 Amps capcity - 4 nos.

c) MCCB, 250 Amps, 4 pole 415 volts, 50Hz, AC supply, 25 KA breaking capacity, adjustable type - 1no. Make ABB/Seimens/Legrand (Commercial Load to VTPNs for A/Cs & lighting load)

d) MCCB, 100 Amps, 4 pole 415 volts, 50Hz, AC supply, 25 KA breaking capacity, adjustable type - 1No. Make ABB/Seimens/Legrand (for UPS & SFC Load)

e) MCCB, 40 Amps, 4 pole 415 volts, 50Hz, AC supply, 16 KA breaking capacity, adjustable type - 1no. Make ABB/Seimens/Legrand (L2 supply Load)

f) Indicators Assy with LED (R,Y,B) - 4 set (on main incoming and all outgoings)

Supply, install, commisioning and testing LT Panel Board factory made indoor cubical type, 3 phase, 4 wire, 440 volts, 50 Hz, dust and vermin proof, IP 54 floor mounted, having 600 Amps copper busbar chamber. The panel board shall made of 2mm thick CRCA sheet with using 40x40x5mm thick angle iron frame and support duly painted using two coats of synthetic enamel paint over a coat of red oxide primer all as approved by the GE with the following switch gears and control. Note :- All incoming and outgoing switches/ MCCBs are to be connected with busbar through proper size of copper conductor.

a) MCCB, 400 Amps, 4 pole 415 volts, 50Hz, AC supply, 25KA breaking capacity, adjustable type - 1no. Make ABB/Seimens/Legrand (Main incoming from TECDE sub-station)

b) Anodised copper busbar of suitable length mounted on insulator of 600 Amps capcity - 4 nos.

c) MCCB, 200 Amps, 4 pole 415 volts, 50Hz, AC supply, 25KA breaking capacity, adjustable type-2 Nos. Make ABB/Seimens/Legrand (outgoing for VTPNs Left & right side mains)

d) Indicators Assy with LED (R,Y,B) - 3set (on main incoming and all outgoings)

Supply, installing, testing and commisioning of Automatic Phase Sequence Corrector (APSC) 40 KVA for phase reversal protection all as directed. Make : L&T/Hager/Seimens

Supply, installing, testing and commisioning of Automatic Phase Sequence Corrector (APSC) 10 KVA for phase reversal protection all as directed. Make : L&T/Hager/Seimens

Supply, installing, testing and commisioning of Surge Protection Device (SPD), Type 2 product - main protection lmax 40KA (With reverse indicator & remote signaling)

Suppling, jointing and testing cable jointing kit for 11 KV (Earthed) grade cable for indoor end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm

RAVINDRA SALES

Vee kay construction

M/s R.V. Constructions

M/s Kohli Builders

M/S Rajeev Construction

M/S LAKSHYA CONSTRUCTIONS