REPAIR /MAINT OF ROOF TREATMENT INCL LEAKAGE /SEEPAGE OF CERTAIN BLDGS IN OLD CAMP AND TKD AREA UNDER AGE B/R II AT BABINA CANTT

Amount

Demolition of cement concrete (reinfored ) as in parapet walls /roofs /floors ( other than ground floor )below or above ground level) etc and as directed.

M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in parapet walls /roofs/slab and similar all as specified and and directed. Note : Contractor to note that No concreting shall be taken place untill design Mix has been carried out from approved Govt lab and got approved from GE in writing.

M&L for formwork for faces of parapet walls/Facia/ fins and like etc complete all as specified and directed.

M&L for mild steel TMT bars as in reinforcement, 10 mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars as in reinforcement, 8 mm dia and over cut to length, bent to shape as in stirupps ,spacers, binders etc and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of wall and ceiling board of any description, fixed in any position in ceiling and as directed.

M&L for aluminium anodised snap grid frame work of the followings (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Wall angle Section allround wall , of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to ceiling with supporting hangers consisting of 6mm dia mild steel rod of suitable length with "J " /" L "bolts nuts and washer etc as per manufacture instructions . Make : Saint Gobain /Everest/ Sintex

M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame. Make : Everest /Ramco/Uppal/Charminar

Demolition of PCC/lime concrete terracing including taking out existing treatment of any description and in any position from roof including lowering down the debries to ground and removing the same to distance exc 100 m n exc 250 mtrs and deposited where directed complete and as directed.

M&L for PCC 1:2 :4 type B-1 using 20 mm graded stone aggregates as in padding laid to slope over roof and surface finish even and fair etc complete all as specified and direcetd. Note : In no case thickness of PCC shall exceed more than 75 mm at apex /crust of roof .

M&L for PCC 1:2 :4 type B-1 using 20 mm graded stone aggregates as in coping or in roof kerbs on roof chamfered on edge including troweling slightly etc complete all as specified and direcetd. Note : In no case thickness of PCC shall exceed more than 75 mm at apex /crust of roof .

Cutting out "V" grooves in existing roof or terrace ,cleaning out , wetting and filled with cement mortar 1:1 complete and as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove sealed with cement mortar in 1:3 complete and as directed.

M&L for rendering 10 mm thick in cement plaster 1:4 on P C C padding on roof , surface finished even and fair mixed with water proofing compound @ 200 ml per bag of cement of 50 kgs etc complete all as specified and as directed. Note : WPC shall be measured and paid for seperately

Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. Make : Latex, Accro-1-Accro Paints, PIDILITE, CICO, FOSROC

M&L for applying water proofing treatment over roof with the following operations :- (a) Preparation of plastered surfaces by cleaning to remove dust and dirt and cleaned with water . (b) Applying first coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm on plastered surfaces (c) Applying APP based polymeric membrane 3mm thick (Minimum thickness) and weight not less than 3kg/Sqm reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over on primed surface laid with 100mm side lap/end lap on prepared surfaces as per manufacturers instructions and under strict supervision of manufacturer's tenchnical representative etc complete and as directed. Make : (a) M/s Texsa India Ltd, A-4/8, 1st Floor,DLF City, Gurgaon – 122 002.(b) M/s MK Products India (Pvt) Ltd, 315, Thaper Chamber – 11, Opp Kaindi Colony,Ring Road, Delhi (c) M/s Tikki Asphalt Ltd, Village Road, Bhandup (W), Mumbai – 400 078. (d) M/s IWL India Ltd, C&D Lakshmi Bhawan, 609, Anna Salai, Chennai – 600 006. (e) M/s Bengal Bitumen, B-53, Sarita Vihar, New Delhi – 110 044.(f) M/s Shalimar Tar Products Ltd, STP House, 570, Phase – V, Udyog Vihar, Gurgaon – 122 016. (g) Torch Tar

M & L for screed bed or bedding layer 15mm thick in CM 1:4 etc complete all as specified and directed

M & L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in near cement slurry on roof etc complete all as specified and directed Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpurspecified and directed

Dismantling CGI/AC (corugated or semi corrugated) and Galvalume sheet in roofing with ridge as directed .

M&L 6mm thick AC corrugated sheet fixed with 'L' or ‘J’ hook or cranked bolts , steel and bituminious washers , fixed in roofs etc complete all as specified and directed. Make: Charminaar/UPAL/RAMCO/EVEREST

Description all as per item no.20 Above but EXEPT AC SHEET and ditto-

S&F 6 mm thick asbestos cement angular Ridge and fixed in position on roof and as directed . Note : Per pair shall be measured as one unit length

Taking up or down existing steel tubing 15 mm bore and connections and incl removal from site etc complete all as specified and as dircted.

Taking up or down existing steel tubing 20 mm bore and connections including removal from site etc complete all as specified and as dircted .

Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed Make: TATA, JINDAL, PRAKASH , SURYA

Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed Make: TATA, JINDAL, PRAKASH , SURYA

Disconnecting of existing water storage tank any description , any type , setting aside and removing from site as directed , capacity exc 300 Ltr but n exc 1000 Ltrs etc complete as direcetd .

S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. Make : SINTEX / POLYWELL / JS POLYPLAST / POLYCON

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. Make : SINTEX / POLYWELL / JS POLYPLAST / POLYCON

Supply only ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 20mm 210 gm) complete all as specified. Make : Prayag/Polytuff/Symet/Shakti

S&F in repais 20mm Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make : Leader/Sant/Zoloto

S&F in replacement PVC (SWR) pipes110 mm dia single sockted in any length with rubber ring joints fixed to wall with stack clamp made of 50x6 mm mild steel flat iron to required shape and 16 mm dia round bar as to hold the clamp etc complete all as specified and directed . Make for all items of PVC (SWR) pipes & Fittings in this BOQ : FINOLEX /SUPREME/ KISAN /PRINCE /RELIANCE INDUSTRIES

S&F PVC ( SWR ) bend 100 mm bore of any radius etc complete all as specified and directed

S&F PVC ( SWR ) junction single ( single -T ) equal or unequal 110 mm bore etc complete all as specified and directed

M/S M S Constructions

FTH Traders

M/S RAJ KUMAR SINGH

DEVENDRA ENTERPRISES

M/s SAS Constructions

UNIVERSAL ENGG CO