Rejuvenation of Thazhankulam in Sundarasolapuram survey No.21/4 in ward no.1

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete - Kerb Walls

Supply and filling in foundation with Filling Sand in layer of 15cm thick well water rammed to consolidation including cost and conveyance of Stone Dust to site incluidng labour charges etc., complete as per standard specification

Plain Cement Concrete 1:4:8 (one cement, four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation

Plain Cement concrete 1:2.4 (one cement, one and half sand, three aggregate) using 20mm gauge hand broken granite stone jelly for Culvert body wall including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete with standard specification.

Manufacturing, supply and fixing of precast reinforced Cement concrete RCC Pole using 20mm ISS HBG metal including all materials and Labour charges to transport the site etc complete as per specification

Supply and fixing of Chain Link - 2" x 2" using 10 Gauge Galvanised Iron Wire of all sizes including all materials and Labour charges to transport the site etc complete as per specification

Labour for tying barbed wire fencing horizontally through the holes in RCC posts with required tension. including cost and conveyance all labour charges etc complete.

Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete.

Painting for Name board with lettering including cost and conveyance of all materials etc,complete

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete PWD ELECTRICAL SD 2021- 22- SD-130

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry PWD ELECTRICAL SD 2021- 22- SD-233

Supply and Erection of 6.00 Metre Length Single Bracket Pole with Base Plate (250 x250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length etc.Complete. PWD SOR 2021- 22- page 148

SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 ways single phase DB No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 2.(SPMCB DB with Acrylic Door Cover with IP 42 Protection) PWD SOR 2021- 22- page 139

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good PWD ELECTRICAL SD 2021- 22- (SD 197)

Supply and fixing of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., TWAD SOR 2021-22 - P.NO 85

Supply and fixing of FUSE UNITS 63 Amps Porcelain Fuse Unit (500V) PWD SOR 2021- 22- page 120

Supply and fixing of NEUTRAL LINK 15 AMPS 12 Way Neutral Link PWD SOR 2021- 22- page 126

Supply and fixing of 4 of 7/16 sq.mm wire inculding all material labour charges etc., complete PWD SOR 2021- 22- page 156

Supply and fixing of 1x1.5 sq.mm wire 2 core Copper cable inculding all material labour charges etc., complete

Supply and fixing of 20W LED Street Light Fitting with LED Outdoor Fittings (Light Emitting Diode)Higher End Philips / Havells / Equivalent etc complete. PWD SOR 2021- 22- page 115

Supply and fixing of Synthetic Moulded Compound Box for Street Light etc complete. PWD SOR 2021- 22- page 126

Supply and fixing of 45 od HDPE black house with clamp set for fixing the pipe etc,complete

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with Stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

S G NARAYANAN (BID ID -1401693)