Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC RZF 498 MG MARG RAJ NAGAR II PALAM DELHI CANTT 110077 | NEW DELHI | DELHI | 110077 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.5 L+₹1.1 L (3.15%)Rejected-Finance | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹34.9 L+₹1.5 L (4.43%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹35.2 L+₹1.7 L (5.21%)Rejected-Finance 233A SRI NAGAR STREET NO 4 RANI BAGH NORTH WEST DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹35.9 L+₹2.4 L (7.30%)Rejected-Finance | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹43.1 L
EMD Value
₹86,160
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
ADDN ALTN UPGRADATION TO BLDG NO P 18 P19 P 20 P 33 P 34 AND P 06 AT EME WKSP UNDER GE WEST DELHI CANTT 10
2022_MES_545597_1
GE/DW-72/2022-23
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹43.1 L
GE WEST DELHI CANTT
₹86,160
30 Dec 2022
10 Nov 2022
8 Dec 2022
11 Nov 2022
6 Dec 2022
24 Nov 2022
Amount
Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed.
All as per item No. 01 above but 20 mm bore .
Dismantling of 100 mm dia Cast Iron pipe (Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed.
All as per item No. 3 above but 75mm dia.
M & L for cutting chases, pinning in brick wall for concealed GI Pipe , cutting n.exc 10cm grith and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed.
S&F tubes 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F tubes 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.
Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.
S&F Powder coated Aluminium frame of powder coating minimum 50 micron for door , windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.
S&F Powder coated aluminium, windows and ventilators shutters, side hung type with out sash bar, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long, hinges type B-21 100mm long and suitable handles ect complete all as specified and directed.
S&F sheet glass pane 5 mm thick tinted sheet glass ordinary quality and galzing with rubber gasket in square n.exc 0.50 Sqm each in each pane complete all specified and directed.
S & F 4mm thick Figured glass ,pin head type and glazing with rubber gasket in sqr n exc 0.5 sqm in each pane etc complete all as specified and directed.
M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness ) and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick) section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed.
M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50mm with square tube solid 6mm thick including aluminium channel of suitable size thickness of channel 1.5mm complete all as specified and directed.
M&L for fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminte door frame moulde with fire ratardent grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified.
M&L for fibre glass reinforced plastic (FRP) door shutter 30mm thick moulded door shutter of required colour and apporved brand and manufacturer made with retardant grade unsaturated polyster resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fitting, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete specification & drawing complete all as specified.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe - 410-0 or Fe - 310 - 0 cooler stand shall be fitted upto 8 storey height complete all as specified and directed.complete all specified and directed.
M & L Preparation of new steel surfaces of any description over 10 cm in width or girth otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide or zinc chrome primer complete all as specified and as directed.
S&F flush shutter 40 mm thick solid core moulded construction with block board core and plywood face surface laminated panels covered with decorative face veneer on both face with lipping/framematch complete all as specified and directed.
M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading etc complete all as specified and directed.
S&F 125 mm long stainless steel door handles 'D' curve ISI Marked complete all as specified and directed.
S&F 150 mm long high grade dulable stainless steel barrel tower bolt of extruded section complete all as specified and directed.
S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrude section or stainless steel complete all as specified and directed.
S&F 100 mm long (size) stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.
S&F 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and fancy type SS finals approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.
Taking down of cement plaster of any description on brick or stone walls/ceiling including raking out joints hacking for key scrubbing down with water and removal of debris beyond MOD land etc complete all as specified and directed.
M&L 12 to 15 mm thick ready Mix plaster of internal wall/external surface finished fair even and smooth without using extracement as whole or in patch complete all as specified and directed.
M & L for preparation of newly plastered surface of walls and applying two coats of OBD over a coat of external wall Putty of min 1 mm thick uniform finish over a coat of emulsion primer including cleaning of paint stains on floor/window/joinery surfaces, complete all as specified and directed complete all as specified and directed .
M & L for preparation of newly plastered external surface of walls including cornices/pillars etc. by brooming down and applying two coats of weather proofing exterior acrylic emulsion paint on walls over a coat of primer over exterior wall care putty not more than 1 mm including cleaning of paint stains on floor/window/joinery surfaces, complete all as specified and directed complete all as specified and directed .
M&L 5 mm thick rendering of ready mix mortar at ceiling surface finished fair even and smooth without using extracement as whole or in patch complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying two coats of Oil Bound Distemper over a coat of primer complete all as specified and directed.
M&L for preparation of old surface ceiling by scraping manually applying two coats of Oil Bound Distemper complete all as specified as following and directed.
S&F in repair vitreous padestal pattern (European type) water closet pan white with cast iron "P" trap including provn of fixing bolt and plastic seat cover heavy duty recessed bottom with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and directed .
S&F in repair PVC flushing cistern 10 Ltrs capacity white valveless, syphonic action type flushing cistern, low level with inlet ball valve, float and handle, including brackets and pipe complete all as specified and directed.
S & F in repair pedestal pattern vitreous china ware wash hand basin (WHB) white complete including, 32 mm dia chromium plated waste coupling , PVC waste pipe and of size not less than 550mm x 400mm complete al as specified and directed.
S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed.
S&F CI 100 mm floor trap/nahani trap with grating with whole/without whole incl jointing to waste pipe fixed in cement concrete complete all as specified and directed.
S&F in repairs 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.
S&F 75 mm C I bends oval access door (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.
S&F100 mm CI soil waste and vent pipe in any length with or without ears with connecting joints laid in trenches or in floor or fixed to walls complete all as specified and directed.
All as per item No. 43 here in before but 75 mm.
S&F 100mm stack clamp out of 25 mm X 3mm flat iron and 12mm dia round iron stays incl bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.
S&F in repair brass CP bib taps long body 15mm bore with lever type handle complete all as specified and directed
S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed.
S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed.
S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum 1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified and directed.
S&F in repairs chromium plated brass overhead shower rose 125 mm size swivel type with long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed .
S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed.
S&F in repairs PVC connection pipe of 450mm long and 15mm size with brass nuts complete all as specified and directed.
S&F in repairs stop valve 15mm bore fancy type chromium plated, with long shank and cup (concealed type) complete all as spd & directed.
Demolition of reinforced cement concrete of any description and in any position including rubbish of the premises beyond MOD land complete all as specified and directed.
M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded stone aggregate) as in kitchen slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete including shuttering all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)
M&L for TMT bars 10mm dia , and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concerete all as specified and directed.
S&F sinks made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding including rubbish of the premises beyond MOD land complete all as specified and directed.
M&L for 18 to 20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round complete all as specified.
M&L for coloured glazed ceramic tiles in vertical surfaces exc 0.09 sqm nexc 0.18 sqm 7 to 8 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 or brick wall of concrete surfaces and finished fair and even complete all as specified and directed.
M&L for vitrified light coloured joint free tiles 600x600 8 to 10 mm thick (square/rectangular) polished , , in floor set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.
M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exc 0.09 sqm nexc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed.
M&L for machine cut Kota stone slab 20 to 25 mm thick as laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including cement screed bed 15mm thick in cement mortar 1:6 complete all as spd & directed.
Demolition of brick work built in Cement mortar including rubbish of the premises beyond MOD land complete all as specified and directed.
M&L brick work built in cement mortar 1:4 using sub class 'B' bricks(using old size brick) straight or curved on plan exc 6 mtr mean radius using old size bricks complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
S&F 1.0 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Dismantling of brick tiles or terracing tiles single layer on roof including rubbish of the premises beyond MOD land complete all as specified and directed.
Demolition of mud phuska on roof slabs, any thickness including cleaning of roof surfaces including rubbish of the premises beyond MOD land complete all as specified and directed.
M & L 15 mm thick rendering in cement mortar on roof including wpc compound @200 ml per one bag of cement of 50 Kg cement finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding, kerb or mud slops, rounded or chamfered on edges, coping, kneelers, kerb water tough and the like incl weathering, slightly rounded or chamfered angleswith water proofing compound surface finished even and smooth without using extra cement complete all as spd & directed. (Rate of WPC shall be included in unit rate)
M&L for water proofing treatment to roof surface with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.5 Kg/Sqm of approved make black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 160 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.2 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Ltr/Sqm over prepared roof surfaces, forcing overlap with a propane or butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing incl applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions complete all as spd & directed. (Make Super thermolay manufactured by STP Ltd or 'Hyper Plas' (Polyster) manufactured by M/S IWL Ltd or 'Shalipals' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd) Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make / manufacturer. 3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size & making good in CM 1:3.
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.complete all as specified and directed.
M&L for preparation of old steel surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coats of red oxide primer including removing of existing paint with paint remover or suitable chemical complete all as specified and directed.
M&L PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair (75mm thick) with using extra cement.
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old GI sheets complete all as specified and directed.
S&F in repair 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed.
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.complete all as specified and directed.
Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing modular switches , socket outlet and fan regulators etc , all as specified and directed for the followings:- Note: ceiling Light/ Fan points wirings are to be drawn in existing in situ conduits all as directed. (a) One light/Fan/bell/Exhaust Fan point controlled by one switch complete all as specified and directed.
(b ) One socket outlet point 5 Amps on independendent board complete all as specified and directed.
(c ) One socket outlet point 5 Amps controlled by one switch on same board along with other switches complete all as specified and directed.
All as per item No 80 above but with 2 core copper conductor cable FLRS 2.50 sqmm for one 3 pin modular socket outlet,15 Amps concealed and including provision of 2.50 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed.
Supply and fix switch modular type single pole one way 6 Amps all specified and as directed.
Supply and fix modular socket 5 pin multi purpose 6 Amps flush type complete all as specified and directed.
Supply and fix modular socket multi purpose 2-in-1, 6 pin 6/16 Amps 2 module complete all as specified and directed.
Supply and fix modular switch 16 Amps one module single pole one way complete all as specified and directed.
Supply and fix modular ceiling fan regulator , step type for ceiling fan 120 w -2 module complete all as specified and directed.
Supply and fix switch modular type single pole bell push 6 Amps complete all as specified and directed.
M&L bell ding dong AC,230 volts,single pole complete all as specified and directed.
S&F ceiling rose surface PVC 65x50 mm type with three terminals complete all as specified and directed.
Supply and fix angle batten holder, Polycarbonate with back plate suitable for B-22 LED complete all as specified and directed.Bulbs.
Supply and fix LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts ,220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix Decorative wall mounting CITY-3 Decorative wall light fixture made out of Polycarbonate, with provision of B-22 base 9 Watts LED Bulbs complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed.
Supply and fix DB TPN 4 way verttical, IP - 43 Protection double door 440 V AC 50Hz with for MCCB 125 Amp,4P as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed.
Supply and fix MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ C curve complete all as specified and directed.
Supply and fix MCB SP 5 to 32 Amps 240 volts 10 KA 50 HZ C curve complete all as specified and directed.
Supply and fix MCB SPN 63 Amps 440 volts 10 KA 50 HZ C curve complete all as specified and directed.
Supply and fix MCCB 125 Amps ,3P ,440 volts 16 KA 50 HZ complete all as specified and directed.
Taking down fan, Ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including PVC unsheathed copper conuctor cable of 4 Sqmm size S/C as earthwire, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories Concealed in walls/surface on ceiling and column,beam including taking down of old sub main wire all as specified and as directed.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point earth plate surrounding use of charcoal dust and salt in layer including excavation and earth work , GI pipe 20 mm dia light grade for watering with wire mess and funnel and GI pipe 15 mm dia medium grade for protection of earth lead complete upto main TPN DB making of PCC earth pit using 1:2:4 type B1 using 20mm dia stone aggregate provision of MS PIT cover 300mm x300mm with handle complete all as specified or indicated including testing on completion all as directed.
Deduct Credit: for demolished/dismantled material of (-) Rs 134862.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
M/S GEETANJALI ENTERPRISES
S GOURAV PRAKASH ENTERPRISES
A V ASSOCIATES
JAIPAL AND BROTHERS
M/S.M.S.Devi.Const.Co
Kunal Construction Co.
M/S DSSP Construction Co.
M/S GR construction compony
Vipul Construction
M/s M M BAHL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .