Construction of Veterinary Check Post at Gagret Distt. Una (HP).

Amount

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer-in-charge at site., according to the HPPWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Form work:-Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge. (A) Foundation, footings bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights.

(C). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

(D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material with in all leads and lifts

Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve graded/crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer including curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundations, footings, bases of columns and the like and mass concrete.

(b). Columns, pillars, posts and struts in all floor levels.

(c). Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels.

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire complete in Super-structure for all floor level in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Brick work using common burnt clay building bricks in superstructure Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. including carriage of material within all leads and lifts. (a) For doors windows and ventilatiors and glazed partitions frames. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) including carriage of material within all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Particle board bwp phenol bonded exterior/interior grade in partitions Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPHPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading of aluminium including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPHPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc., complete:including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge. a) 300X16 mm

Providing and fixing anodized aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc.,including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge. ( a). 250x10mm

( b). 200x10mm (Two Hundred into Ten milimetre)

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc., complete: including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge. (i) 125mm.( One Hundred Twenty Five milimetre)

(i) 100mm.( One Hundred milimetre)

Half brick work using common burnt clay building bricks in super structure above plinth level upto floor all level using second class building bricks in cement mortar 1:4 (1cement : 4sand) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand)including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty double charged vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Coloured digital/White glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of size 20×30cm nitco or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (one cement isto three sand) and jointing with neat cement slurry including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cementincluding curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint : In gratings framed guard bars,ladders,railling,brackets and similar works including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Finishing with floating coat of neat cement slurry including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished 40 mm thick. including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing on wall face PVC(D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqmincluding filling the joints withapproved adhesive complete. 100mm dia pipes including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing M.S.holder batclamps of approved design to C.I.or S.C.I pipes embeded in andincluding cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2sand 4 stone graded stone aggregate20 mm nominal size) and cost ofcutting holes and making good the 100 mm diametre including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 60 mm ISI Marked as per drawing and Technical Specification Clause 1504 including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying upto floor two level cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete including form work in String courses coping bed plates, anchor blocks plain window sills and the like including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800mm x 800mm and 500mm deep including precast RCC cover with frame 560 mm internal dia HD 20 With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Construction chamber 300mm x 300mmx500mm inside size with cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 15 mm nominal bore.

(b) 20 mm nominal bore.

Making connection of galvainised steel distribution branch with galvainised mild steel main 20mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. Plain bend 110 mm nominal size. including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing pvc cowl 110mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of material within all leads and lifts.

Providing and fixing Vitreous china wash down, water closet ( European type W.C pan) Cream shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 Cement :1 Sand ) ( Seat and over to be measured and paid for separately) including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. 110mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing vitreous china wash basin Cream Shade with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP brass bib tap with capastan head 15 mm dia. weight should not be less than 550gm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP brass pillar tap with capstan head 15 mm dia weight should not be less than 550gm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP stop cock 15mm diaweight should not be less than 550gm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP connection pipe with brass unions 30 cms length 15mm nominal size including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing brass full way valve with wheel including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.(1) 15mm nominal bore with Minimum Weight of 300 Gm.

II) 20mm nominal bore with Minimum Weight of 550Gm

Providing and fixing GI or MI union including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge.(1)15mm nominal size

II) 20mm Nominal size

Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings Vitreous china 600mm x 450mm x 150mm including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing PVC water storage tank double core 1000 ltr net capacity complete in all respect including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing Zet connection complete in all respect 15 mm Dia including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing white glazed fire clay stall urinal of 1150mmx500mm size including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. White plastic seat and cover including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of materials through all modes of transportation with in all leads and lifts, as per HPPWD specifications and as per direction of the Engineer-in-charge

Sushil Kumar

Gaurav Kumar

MUNISH THAKUR