Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹35.8 L+₹48,823.12 (1.38%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹35.9 L+₹62,880.62 (1.78%)Rejected-Finance | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹37.7 L+₹2.4 L (6.67%)Rejected-Finance | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹41.5 L+₹6.2 L (17.5%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹42.3 L
EMD Value
₹84,600
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF THANE
Office of Military Engineer Services ,Garrison Engineer (AF) Thane, Kolshet Road, Sandoz Baugh Post, Thane 400607
SR TO BLDG No P-2, P-6 and P-10 AT AFS KANHERI HILLS UNDER GE AF THANE
2023_MES_596845_1
8257/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
THANE
as per nit
8 documents required · 8 mandatory
₹500
GE AF THANE
₹84,600
Yes
28 Jul 2023
19 May 2023
19 Jun 2023
19 May 2023
17 Jun 2023
5 Jun 2023
19 May 2023 - 5 Jun 2023
Amount
Demolition of brickwork or stone boulders masonry built in CM incl all quins, arches, pillers etc, complete all as specified and as directed by Engr-in-charge.
Taking down cement plaster any description etc incl racking out joints, hacking for key scrubbing down with water etc , complete all as specified and as directed by Engr-in-charge.
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises , complete all as specified and as directed by Engr-in-charge.
M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 , complete all as specified and as directed by Engr-in-charge.
M&L for Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No.4, here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified & as directed. (water proofing compound shall be measured and paid seperately)
Supply only Solvent free Epoxy concrete bonding agent. , complete all as specified and as directed by Engr-in-charge. Make : Nitobond EP or FOSROC/Carbodur of SIKA/ or equivalent in PEDILITE
M&L for providing reinforced cement concrete (1:1½: 3) type B0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture CONPLAST X421IC (Fosroc) or equivalent as per manufactures instructions as in columns, pillars, beam, lintel, slab supported walls roof, landings, balconises, canopies, deck slabs, Chajjas shelves, Fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like etc including necessary form work and scaffoldings up to 2 story of building complete all as specified & as directed.
M&L for Pre-cast cement concrete block masonry 1:3:6 Type C-1 (using 20mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete complete all as specified and directed by Engr in Charge
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified.
M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed
M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement all as specified.
M&L for rendering 5mm thick in cm 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement all as specified.
M&L for 3mm thick wall care putty on wall as specified.
M&L for 3mm thick wall care putty on ceiling as specified.
M&L for preparing new plastered surfaces and applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified.
M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.
M&L for Preparing new plastered surfaces of ceiling and applying two coats of OBD complete , complete all as specified and as directed by Engr-in-charge.
M&L for washing,rubbing down and removal of existing surfaces and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.
M&L for washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls , complete all as specified and as directed by Engr-in-charge.
M&L for washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of distemper oil-emulsion on walls , complete all as specified and as directed by Engr-in-charge.
M&L for preparation of old decorated cement plastered surfaces of ceiling and applying of one coat of white wash , complete all as specified and as directed by Engr-in-charge.
M&L preparation of old painted steel surface & applying a coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters form frame) . exc 1.5 sqm & n.exc 4 sqm each , complete all as specified and as directed by Engr-in-charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and removing to store , complete all as specified and as directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters form frame) n. exc 1.5 sqm each , complete all as specified and as directed by Engr-in-charge.
S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engr-in-charge.
S&F 40mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match , complete all as specified and as directed by Engr-in-charge.
S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats as specified and directed , complete all as specified and as directed by Engr-in-charge.
M&L for 25 x 3mm FI holdfasts for fixing door frame , complete all as specified and as directed by Engr-in-charge.
M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required , complete all as specified and as directed by Engr-in-charge.
M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc , complete all as specified and as directed by Engr-in-charge.
M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified and as directed by Engr-in-charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed by Engr-in-charge.
S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long, complete all as specified and as directed by Engr-in-charge.
S&F Floor door stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor , complete all as specified and as directed by Engr-in-charge.
S&F extruded aluninum alloy handles, fabricated type anodized 150mm long fixed , complete all as specified and as directed by Engr-in-charge.
S&F butt hinges, medium weight, cold rolled mild steel, of size 100mm , complete all as specified and as directed by Engr-in-charge.
S&F mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate , complete all as specified and as directed by Engr-in-charge.
M&L for medium density fibre board 18/19mm exterior grade, prelaminated with both side white laminations , fixed with screws to timber frame work.
M&L for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, Exc 13 Sq cm & n Exc 25 Sq cm ,complete all as specified and directed
S&F for 75 mm brass handles, cast type , polished type complete all as specified and directed by Engr-in-Charge
S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board , complete all as specified and as directed by Engr-in-charge.
M&L for Hacking out old broken glass (any thickness, size, quality or description) from alluminium/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and directed.
S&F sheet glass ordinary quality 5.5 mm thick and glazing with oil putty or aluminium/rubber beading in squares exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.
S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.
S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.
S&F Aluminium door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron),aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete rates include for aluminium hardware as indicated, glazing clips, rubber packing, aluminium snap on beading for fixing glass panes in frames , complete all as specified and as directed by Engr-in-charge.
S&F Aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. , complete all as specified and as directed by Engr-in-charge.
S&F aluminium grill powder coated (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, , complete all as specified and as directed by Engr-in-charge.
S&F aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge.
S&F for providing and fixing zinc alloy roller for sliding window/ aluminium sections with necessary screws etc,complete all as specified and as directed by Engr-in-charge.
S&F for Zinc alloy (powder coated) casement lock for windows with necessary screws etc, complete all as specified and directed,
Taking down shutters of any description easing & adjusting and refixing in same opening area exc 1 sqm but n. exc 2 sqm each , complete all as specified and as directed by Engr-in-charge.
Taking down shutters of any description easing & adjusting and refixing in same opening area n. exc 1 sqm each , complete all as specified and as directed by Engr-in-charge.
S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size , complete all as specified and as directed by Engr-in-charge.
S&f factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of aluminium tower bolt 100 mm size, complete all as specified and as directed by Engr-in-charge.
S&F Toughened glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, supports and hinges/ pivots as required ,complete all as specified and directed.
S&F Extruded brass handles, 300mm long fabricated type polished fixed to glass doors and similar works ,complete all as specified and directed.
S&F Solar control film 25 micron reflective type area exc 1.5 sqm sticked to glass panes as per instructions of manufacturers ,complete all as specified and directed.
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ,complete all as specified and directed.
S&F in repair Mild steel chromium plated curtain rods 25mm dia including fixing with brackets, nobs, stops, hooks etc ,complete all as specified and directed.
M&L in repairs orrisa pattern viterious china ware water closet white glazed of pan size 580x440mm with integral foot rest fixed flushed pipe including all joints and making good to the floor ,complete all as specified and directed.
S&F in repairs wash down water closet (EWC) (pedestal pattern) complete including flush pipes and 'P' or 'S' trap all joints , complete all as specified and as directed by Engr-in-charge.
S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel hinge chromium plated , complete all as specified and as directed by Engr-in-charge.
S&F in repair low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float and ball handle & capacity 10 ltr ISI marked including 32mm PVC flush pipe , complete all as specified and as directed by Engr-in-charge.
S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe ,complete all as specified and as directed by Engr-in-charge.
S&F wash basins, vitreous china (under counter oval type) of size 580 x 415 x 190 mm including fixed on granite with cement including waste coupling and waste pie etc., complete all as specified and as directed by Engr-in-charge.
S&F in repairs brass cromium plated shower rose with swivel joint 125 mm size all as specified and directed by Engr in Charge.
S&F in repairs bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle but fancy type screwed down screwed for iron pipe , complete all as specified and as directed by Engr-in-charge.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position , complete all as specified and as directed by Engr-in-charge.
S&F CP Two-way Bib taps, 15mm dia of bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to pipe, complete all as specified and as directed by Engr-in-charge.
S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long , complete all as specified and as directed by Engr-in-charge.
S&F in repairs quarter turn CP Brass fancy type stop valves/angle valves screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia , complete all as specified and as directed by Engr-in-charge.
S&F 15mm dia long neck pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe , complete all as specified and as directed by Engr-in-charge.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and union for discharge pipe , complete all as specified and as directed by Engr-in-charge.
S&F Vitreous China Urinal, Half stall type,(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, grating and Union for discharge pipe , complete all as specified and as directed by Engr-in-charge.
S&F CP Urinal spreader any colour for fixing with 15 mm dia pipe , complete all as specified and as directed by Engr-in-charge.
S&F in repairs brass CP wall mixer for mixing hot & cold water screwed down for iron pipe15mm dia , complete all as specified and as directed by Engr-in-charge.
Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store, complete all as specified and as directed by Engr-in-charge.
S&F1000 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position , complete all as specified and as directed by Engr-in-charge.
S&F in repair 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Min. weight 20mm-210gms , complete all as specified and as directed by Engr-in-charge.
S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed by Engr-in-charge.
S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed by Engr-in-charge.
Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe, complete all as specified and as directed by Engr-in-charge.
Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe , complete all as specified and as directed by Engr-in-charge.
M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and as directed by Engr-in-charge.
M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and as directed by Engr-in-charge.
Dismantling cast iron drain pipes of any description , complete all as specified and as directed by Engr-in-charge.
S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp , complete all as specified and as directed by Engr-in-charge.
S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp , complete all as specified and as directed by Engr-in-charge.
S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors , complete all as specified and as directed by Engr-in-charge.
S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors , complete all as specified and as directed by Engr-in-charge.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement , complete all as specified and as directed by Engr-in-charge.
S&F of 110mm bore PVC (SWR) bends any radius , complete all as specified and as directed by Engr-in-charge.
S&F of 75mm bore PVC (SWR) bends any radius, complete all as specified and as directed by Engr-in-charge.
S&F of PVC (SWR) branch piece "T" or "Y" type 110mm dia double socket , complete all as specified and as directed by Engr-in-charge.
S&F of PVC (SWR) branch piece "T" or "Y" type 75mm dia double socket , complete all as specified and as directed by Engr-in-charge.
S&F PVC (SWR) vent cowl of 110mm dia , complete all as specified and as directed by Engr-in-charge.
S&F PVC (SWR) vent cowl of 75mm dia , complete all as specified and as directed by Engr-in-charge.
S&F in repair cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed in cement concrete type 1:2:4 type B1 , complete all as specified and as directed by Engr-in-charge.
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises , complete all as specified and as directed by Engr-in-charge.
M&L for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed by Engr-in-charge.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations , complete all as specified and as directed by Engr-in-charge.
M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish , complete all as specified and as directed by Engr-in-charge.
M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes , complete all as specified and as directed by Engr-in-charge.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed or bedding layer in CM(1:4) , complete all as specified and as directed by Engr-in-charge.
M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes, complete all as specified and as directed by Engr-in-charge.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.11 Sqm but not exce 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.
M&L for Vitrified Ceramic tiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed
Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical position as dado/skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thck in CM 1:4 as backing coat to receive tiles in vertical positioncomplete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided all as specified and directed
M&L for 50 mm thick PCC type C-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection finishing surfaces of concrete even and fair (without using extra cement), complete all as specified and directed.
M&L Plain Cement concrete type B-2 (1:2:4) using 40 mm graded aggregate in surface channels and drains as specified and directed.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub-floors, sub-bases, floors and pavings, etc. as specified and directed
M&L for chequered cement concrete tiles (reflective type) with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected.
M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, benching and similar work including necessary form work ,complete all as specified and directed.
Removing existing water proofing treatment where so ever exist (except concretepadding) and removing debris/rubbish off the site ,complete all as specified and directed.
Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note:- (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as directed.
M&L for providing PCC type B- 1, (1:2:4) using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately)
Labour only of taking up or down steel tubing and connections of 25 to 32mm bore of pipe including cleaning and refixing in the same position as in roof /walls, etc during carrying out of water proofing treatment without damaging to existing services, etc. ,complete all as specified and directed.
Labour only for disconnecting existing over head tanks of capacity exc.500 and n.exc 1000 ltr, setting aside or lowering if required for repair of roof water proofing treatment and hoisting, reconnecting and re-fixing in position after necessary work without damaging to existing services etc. all as specified and directed.
M&L for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : TEXSA/ BITUMAT/ BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 3 mm mineral of TEXA/WP Shield 103 PM of SIKA or IWL or Equivalent material of BITUNIL/BITUMAT. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer ,complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated,etc sheets in roof coverings,complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed.
M&L for Cutting chases, pinning in, making good to facings on stone concrete block or slab walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inserting/concealed roofing sheets etc. and making good cutting exceeding 20cm girth ,complete all as specified and directed.
S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe 410-W (Gde-E- 250) quality-A) , complete all as specified and as directed by Engr-in-charge.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed by Engr-in-charge.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by Engr-in-charge.
S&F Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete (Fe-410W Gde-E 250 quality-A) , complete all as specified and as directed by Engr-in-charge.
S&F MS works in Hand rails, wind ties, flat iron fillets for roof including securing bolts posts, drilling holes, notching for wire, etc.including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 ,complete all as specified and directed.
S&F Expanded metal n.exc 4kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members , complete all as specified and as directed by Engr-in-charge.
M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed by Engr-in-charge.
M&L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridge/valley gutters 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed by Engr-in-charge.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coat of synthetic enamel paint over a coat of red oxide primer , complete all as specified and as directed by Engr-in-charge.
S&f powder coated aluminium snap grid frame work for false ceiling of Size of grid 605 x 605mm and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F solid PVC insulation panels 10 mm thick for false ceiling with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing as specified in SSR P-I 2009 complete all as specified and directed.
Taking down/out copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down/out unserviceable Wires from the existing Sub-main Wiring of any type and any description, complete all as specified and as directed.
Taking down the existing unserviceable Main Switch/ Cut out/ DBs of any type/ capacity and any description as existing at Site including Making Good the Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed.
M&L for dismantling the indoor and outdoor units of Air conditioner Split type completely, reinstalled in new/same location ,including connection commissioning complete all as directed as specified by Engineer-in-Charge. (Note :- The Cost of Refrigerent to maintain reqd temperature as per site condition is included in this item nothing shall be paid extra for gas charging and refrigerant gas.)
Material and labour for point wiring complete with 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 volts drawn through and including concealed PVC rigid conduit medium grade, pipe hooks, elbows, junction covers and junction boxes terminated in existing modular steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls including cutting chases in walls for conduits and making good disturbed surfaces of wall in CM 1:3 for mounting switches, sockets, fan regulator, covered with including 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including 1.5 Sqmm PVC insulated solid copper conductor wire as earth continuity to common earth and connecting to earth dully for following points controlled by one switch complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No. 146.00 here-in-before but for one five pins 5 Amps switch socket outlet point on same board complete all as specified and directed.
All as per Srl item No. 146.00 here-in-before but for ONE 3 PIN SOCKET OUTLET 6 AMP ON THE INDEPENDENT BOARD, complete all as specified and as directed.
Material and labour for point wiring with 2.5 Sqmm (nominal area) PVC insulated unsheathed stranded copper conductor FRLSH cable 1100 volt grade (ISI marked) drawing into and including non-metallic rigid PVC concealed conduit (medium quality ISI marked) with all fittings such as tee/bends etcterminated in new MS box and fixing new bakelite sheet as top cover and including 1.5 Sqmm single core PVC insulated copper conductor solid earth wire to common earth and connected to earth dully for one power point independent complete all as specified and directed Engineer-in-Charge.
M&L in replacement of Sub-main Wiring with 2-Runs of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn in EXISTING CONDUIT/PVC CASING & CAPING, complete all as specified and as directed. Note : (i) Three length of wire along with conduit will be measured as one Length.
M&L in replacement of Sub-main Wiring with 2-Runs of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn in EXISTING CONDUIT/PVC CASING & CAPING, complete all as specified and as directed. Note : (i) Three length of wire along with conduit will be measured as one Length.
S&F in replacement of Switch Piano 6 Amp, Flush type, Single Pole, 1-way, complete all as specified and as directed.
Supply and Fix in replacement of switch socket combination 2 in 1,6 pin, 5/15Amps flush type 240 V ,complete all as specified and as directed by Engr-in-charge.
S&F in replacement of Socket Outlet 6 Amp, Piano, Flush type, 2-in-1, multi-purpose, 5 Pin, complete all as specified and as directed.
Supply and Fix in replacement of switch socket combination 2 in 1,5 pin, 5 Amps flush type 240 V ,complete all as specified and as directed by Engr-in-charge.
S&F in replacement of Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body ,complete all as specified and as directed.
Supply and Fix in replacement of fan regulator Electronic type step type for 400 watts ,complete all as specified and as directed by Engr-in-charge.
S&F in replacement of lamp holder,PVC/Polycarbonate type with back plate suitable for batten fitting Make: Legrand/Ancor/Havells/SKN
S&F in replacement LED lamp 10 Watt complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in replacement of LED bulding security light fitting of 25/30 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD (I) less than 10%, cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report. ,complete all as specified and as directed by Engr-in-charge.
Supply and fixing ,in replacement,round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.
Supply and Fix in replacement of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor all as specified and as directed.
S&F in replacement flush mounting factory made SPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 100 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar, complete all as specified and directed by Engineer-in-charge.
S&F in replacement MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge.
S&F in replacement MCB, Single Pole & neutral, 40 Amps 'C' Curve having breaking capacity 10 KA complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of sheet metal plug & socket DB, SP, with a two pin and earth plug with socket, 230 Volts with & including one MCB SP ‘C’ Curve 10 kA, 20 Amps, complete all as specified and directed by Engineer-in-charge.
Taking down/out ceiling fan,exhaust fan and wall fan and refixing the serviceable fans after cleaning at existing/new location or deposited to MES store Yard,including connection commissioning complete all as directed as specified by Engineer-in-Charge.
S & F in replacement of the Exhaust fan, heavy duty, copper wound,steel body & frame , single phase, 230 volts size 300mm sweep with lower shutter complete all as specfied and directed by Engineer-in-Charge.
S & F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , complete all as specified and directed by Engineer-in-charge.
Vinod Enterprises
M/s Qureshi Construction Co
Safe Construction Co.
Nissan Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .