COMPREHENSIVE MAINT INCLUDING REPAIRS TO PLUMBING VERTICAL STACKS WELCOME DAY TO DAY MD OTM ACCN BUILDINGS SEWAGE LINE SEPTIC TANKS COMPOUND WALL AND SECURITY WALL UNDER THE AOR OF GE NORTH BANGALORE

Amount

M & L 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane all as specified and as directed. incl Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane all as specified and as directed. incl Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) incl fancy finale caps cap etc complete all as specified and as directed

S&F in repair Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long incl wooden base etc complete all as specified and as directed

S & F in repairs Aluminium anodised barrel tower bolts of extruded section of length 150 mm all as specified and as directed.

S & F in repairsAluminium anodised barrel tower bolts of extruded section of length 200 mm all as specified and as directed.

S & F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed.

S & F in repairs Extruded alloy handles fabricated type anodised of size 150 mm all as specified and as directed.

S&F in repairs Butt hinges medium weight cold rolled mild steel of size of hinges 100mm

S & F in repairs Hasp and staple safety type of size 100 mm of aluminium anodized all as specified and as directed.

S & F in repairs Mortice lock with four lever brass body 100mm size suitable for 25 to 60mm thick doors including screwing and fixing all as specified and as directed.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass,polished complete all as specified and as directed.

S & F in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S&F in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) in repairs complete all as specified and as directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs,including roller and roller plate complete

S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm and Re-fixing in same opening complete all as specified and directed

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed

S & F in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,fixed in kitchen Cabinet or cupboards all as specified.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter Not Exc 3 sqcm cross section area all as specified and directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor etc complete all as specified and as directed

Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing with wood free EPS .

S & F Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Anodised aluminum powdercoated (of any shade/colour as approved by GE ) ventilators with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed by the Engineer-in-charge (Size of Ventilators = 600 x 900 mm)

S&F Anodised Aluminum Poweder coated three track sliding aluminum window including Frame and shutters consisitng of 2xglazed shutter (thickness of glass not less than 5mm) & 1xGauged shutter(stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm), Aluminum sections weighing not less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as self closing clips, handles etc all as specified and directed

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description all as specified and directed.

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed

M & L cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) 25mm thick as in levelling concrete finished even and fair complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) complete including dismantling the existing unserviceable floor/hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and directed

M & L for Glazed coloured ceramic tiles in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM(1:3) on Brick work or stone masonry surface as backing coat of tiles complete including dismantling the existing unserviceable floor/hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and directed

M&L for vitrified ceramic tiles light colour 8-10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) complete including dismantling the existing unserviceable floor/hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and directed

M&L for vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirtind/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM (1:3) on Brick work or stone masonry surface as backing coat of tiles complete inculding dismantling the existing unserviceable floor / hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and directed.

M&L Pre-polished Machine cut Granite stone slab 18-20mm thick with edge rounded one side laid over and including 15mm thick cement mortar 1:4 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including complete inculding dismantling of old Stone set paving of any description (Laid bedded and pointed in any cement mortar) incl removing off the premises all as specified and directed.

S & F kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete in repairs including Dismantling of old sink .

S&F of kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete in repairs including Dismantling of old sink

S&F in repairs stainless steel plate rack of 0.63mm thick stainless steel sheet, size 800mm x 600mm complete all as specified and as directed

S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red leead cement and other end fixed, PVC waste pipe 75 cm long complete all as specified and directed fixed in repairs

S & F vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed. Make : cera model cat pt no. 2008 or its equivalent in Hindware / Jaguar / Prayag

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed.

Supply & laying 20 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified and directed including taking down old unserviceable pipe lines of any type.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified including taking down old unserviceable pipe lines of any type.

S&F 20mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed including taking down old unserviceable pipe lines of any type.

S&F 25mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed including taking down old unserviceable pipe lines of any type.

S&F in repairs Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Cat No-6875 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No 6850 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm Sink mixture with regular spout W/M all as specified and as directed.(Cat No 6855 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6814 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm pillar cock, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6802 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BOS-92 of Prayag or equivalent make as specified in CA)

S & F in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No 6810 Marcus series of Prayag or equivalent make as specified in CA)

S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S & F chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make as specified in CA)

S & F chromium plated bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6806 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA)

S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA)

S&F in repairs Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified in CA)

S&F in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA)

S&F in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.

S & F in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

S&F in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.

S&F in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-191A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F in repairs peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction

S&F in repairs Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions

S & F in repair PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S & F in repair PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

M&L 32 mm dia waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and flynuts, flange end fixed in repair complete all as specified and as directed

M&L 75 mm dia waste fittings, brass, chromium plated for sinks etc with long screwed shanks and flynuts, flange end fixed in repair complete all as specified and as directed

M&L in repairs 32mm dia, 800mm long corrugated waste pipe complete all as specified and as directed.

S & F in repair 75mm dia PVC(SWR) Multi floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

S & F in repair grating doom 100 mm dia of PTMT complete all as specified and as directed

S&F in repair 15mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed

S&F in repair 15mm dia Pillar tap PTMT fancy type any colour screwed, for iron pipe and fixed

S&F in repair 15mm dia angle stop valve of PTMT any colour pressed screwed, for iron pipe and fixed

S & F PVC sintex tank cover complete as in repairs

S&F in repair plastic water closet seat cover for pedestal pan closed pattern with flat bottom, and cover and mild steel chromimium plated or aluminised hinging device

Petty repairs to leaking water in bib taps, pillar taps, stop cock , angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed

Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and directed

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs two layered including dismantling/taking down old unserviceable tanks complete all as specified and directed

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling/taking down old unserviceable tankscomplete all as specified and directed

S & F in repairs 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement Note :- WPC will be measured and paid separately

Supply only liquid water proofing compound

M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement

M&L Preparation of newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistent primer complete all as specified and directed

M & L preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

M&LPreparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall surfaces and applying one coat of oil bound distemper white or tinted all as specified & as directed.

All as per item No 100 above but applying two coats of OBD

M&L for Complete removal of existing treatment on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistent primer complete all as specified and directed

M&L for Complete removal of existing treatment on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistent primer over 1mm thick wall care putty complete all as specified and directed

All as per item No 100 above but one coat of OBD on ceiling surfaces

All as per item No 102 above but two coats of OBD over a coat of alkali resistant primer on ceiling surfaces

M&LPreparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of white wash on internal wall surfaces all as specified & as directed.

All as per item No 106 above but applying two coats of white wash

All as per item No 106 above but applying on ceiling surfaces

M&L Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall and applying one coat of cement base paint complete all as specified and directed.(Buildings upto four storey high)

M&L Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall and applying two coat of cement base paint all as specified and directed.(Building upto four storey high)

M&L Complete removal of existing treatment on wall surface of any description including brooming down with steel wire brushing scrapping down smoke soot's ,moulds,moss and efflorescence,salts ,trading oil and greasy spots etc and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (APEX ULTIMA OR TECHNO COMMERCIALLY EQUIVALENT IN OTHER APPROVED MAKES AS IN CA) of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed. Note :- (i) Work to be carried out in Buildings upto four storey high. (ii) Cost of scaffolding is deemed to be inculded in quoted rate.

M & L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for cleaning of PVC/RCC over head water tanks at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus and any other bacterial material from sides/bottom of tank, cleaning shall be done by draining / pumping out water / sludge from bottom, by high pressure water jet of pressure not less than 120 PSI for removing clogged mud/scales etc and cleaning the same again with self priming pumped fresh water and disinfecting the water tank by using UV radiator and approved chemical (chlorite), after cleaning writing letter / figures (Date of cleaning and next Date of cleaning) on black back ground with white synthetic enamel paint including removing the existing letters/ figures complete all as specified and as directed for capacity of water tank Exc 250 Litre N.exc 500 ltr capacity Note: (i) Contractor has to ensure there is no damage / leakage in tank after cleaning . (ii) Any air lock /blockage of water flow after cleaning has to be make good immediately without any extra cost

All as per item No 114 above but capacity of tanks Exc 500 litre N.exc 1000 ltr capacity

All as per item No 114 above but capacity of tanks Exc 1000 litre N.exc 2000 ltr capacity

Material and labour for spraying antiweed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of palnt/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings upto four storey high, complete all as specified and directed by Engineer-in-charge. NOTE:- Contractor has to execute the work of de-generated plant/weeds as per the prior approval and directions of Engineer-in-charge.

All as per item no 117 here in before but plants located in the buildings of five to eight storey high.

Material and labour for cleaning of roof at height of (on accessible roof height N.exc 30RM /inaccessible roofs height N.exc 10RM) Area of Roof upto 500sqm by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus , leaves etc deposited over slab and making good the distrubed surfaces if any with and including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and removing the material so obtained out side complete all as specified and directed by Engineer-in-charge.

All as per item No 119 above but Area of Roof exc 500Sqm

Removal of sludge from septic tanks / manholes of any size and depth and burying the sludge in pits with suitable depth & filled by earth and removal of surplus soil including dewatering of water complete all as directed to a place as earmarked by state auth out side the defence land . Note - Dewatering of water or mud will not be paid. Only removal of sludge to be paid

Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor / nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a place as earmarked by state auth out side the defence land to the entire satisfaction of engineer-in-charge.

Clearing & removal of all blockage in sewage line from manhole to manhole of length not exc 20 mtr, of any dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manunally / mechanically including desludging of manhole / sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R MEG daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. (b) Contractor shall provide service providers (1XSWEEPER & 1XHELPER) as per the complaints list given alongwith all requisite tools, equipments, including all safety measures (i.e safety shoes, gloves, googles, mask, helmet etc) for attending complaint and ensure completion report by 5.00 PM same day. CONDT/---124

CONDT/---123 (c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detacted/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 200/- per complaint shall deducted from contractor payments. (e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.

Mechanically pumping out sewage liquid from septic tanks/manholes of any size and depth and removal the same to distance/place as earmarked by state auth out side defence land including any type of T & P required etc. dewatering of water complete all as directed.

Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4, complete etc complete all as specified and as directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

M&L for laying of DWCPE sewage pips of 150mm inner dia bore of pipe class SN-8 including sealing of joints, fittings etc complete with collars complete all as specified and directed.

M&L for laying of DWCPE sewage pips of 200mm inner dia bore of pipe class SN-8 including sealing of joints, fittings etc complete with collars complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B0 using 12.5mm graded stone aggregates as in copings, fixing of post/ Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 mixed water proofing compound as per mfd instruction to be finished even and smooth with out using extra cement complete all as specified and directed Notes :WPC shall be measured and paid sepeartely

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of white wash etc complete all as specified and as directed

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

Providing machine presssd (Rubber moulded) pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade over and including Supply and spreading of M-sand 50mm thick(compacted thickness) as cushioning material inculding dismantling of Stone set paving of any description or in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises complete all as specified and directed.

S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed.

All as per item No 151 above but 110 mm dia .

S&F in repair 75mm dia PVC (SWR) Bends with access door of any radius

All as per item No 153 above but 110mm dia

S&F in repair 75mm dia PVC (SWR) junction single(single T) equal or unequal with access door

All as per item No 155 above but 110mm dia

S&F in repair 110mm dia PVC(SWR) brach piece, single (single Y) equal or un equal with access door

All as per item No 157 above but 75mm dia

S&F in repair 110mm dia PVC (SWR) brach piece, (double Y) equal or un equal with access door

All as per item No 159 above but 75mm dia

S&F in repair 75mm dia PVC(SWR) vent cowl

All as per item No 161 above but 110mm dia

Omkar Constructions

S SUDHAKAR

M/S POTHIRAJ AND CO