E-tender/Eng/EQ-213/25-26

Amount

Distribution wiring in 2x22/0.3(1.5sq.mm) single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR with 1x22/0.3(1.5sq mm) single core stranded "FR" PVC insulated…………..Modular type switch fixed on MOD GI switch board ....2no suitable size ph& N...original finish a) Ave run...8mtr.

b) Ave run 9mtr

c) Ave run 10mtr

Distribution wiring in 1.1KV grade 22/0.3(1.5sq.mm)single core stranded FR PVC insulated &unsheathed copper wire in 20mm size pvc rigid conduit FR with 1.1KV grade 1x22/0.3(1.5sq.mm)…to 6A 3pin mod type plug socket & switch on 4mod GI switch board…..building works a) On Board

b) Ave run 6mtr

c) ave run 7.5mtr

S&F 240V ,16A 3pin mod type plug socket with 16A mod type switch without plug top on 4 mod GI mod type switch board…..continuity wire etc

S&F 240V , 3nos16A 3pin mod type plug socket with 3nos 16A mod type switch 20A mod switch type SP MCB & indicator without plug top on 2row 12 mod GI mod type switch board…..continuity wire etc

S&F240V 4nos 6A 3pin mod type plug socket with 4nos6A mod type switch,16A mod switch type MCB…2row 18 mod top cover…..continuity wire etc

S&F240V modular socket type(2mod) fan regulator(step) on existing mod GI switch board..connections etc

S&F 240V,25A mod type socket,25A mod type starter with 25A mod switch type DP MCB &6 mod GI….earth continuity wire etc

S&F 415V8way D/D Vertical TPN MCB DB for MCCB incomer with IP42/43 protection……earthing attachment 160A 8way,Legrand,L&T,Schneider

S&F D/D horizontal TPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 8way,Legrand,Schneider,L& T

S&F D/D horizontal SPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 2+12way,Legrand,Schneider,L& T

s & F 415V four pole MCCB of breaking capacity 35KA with fixed thermal &fixed magnetic setting in existing DBs with necy connection 160A,Legrand,Schneider,L&T

S & F240/ 415V MCB isolator on DIN rail of existing DBs & necy connection 100A FP,Legrand,Schneider,L&T

S & F240/ 415V MCB isolator on DIN rail of existing DBs & necy connection 63A DP,Legrand,Schneider,L&T

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP 6-32Amps Legrand,Schneider,L&T

S&F of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling not more than 17.5% suspended from ceiling incl.S &F GI connector,6mm dia MS suspenders,bolts& nuts,steel fastner etc…..MS support.300x50x1.25mm(18SWG)

S& F of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos suspenders……MS supports.300x50x1.25mm(18SWG)

Disrtibution wiring in 1.1KV single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR…as required a)2x22/0.3(1.5sq.mm)+ 1x22/0.3(1.5sq.mm) ECC

b)2x36/0.3(2.5sq.mm)+ 1x22/0.3(1.5sq mm)ECC

c)2x56/0.3(4sq.mm)+1x36/0.3(2.5sq.mm)ECC

d)2x84/0.3(6sq.mm)+1x56/0.3(4sqmm) ECC

supplying &Laying of cable as below on existing cable tray & binding with suitable GI wire…of PVc Arm.cable with AL.conductors 1.1 kv grade conforms to IS:1554(part 1)for following cross section a) 1x50sq.mm 3.5

c) 1x 16sq.mm 2C

c) 1x35sq.mm 3.5C

S& F compression type gland with brass gland , ring,rubber ring for dust & moisture proof entry..as below& fixing only the end with dowels make socket a)1x50 sq.mm 3.5

b) 1x35sqmm 3.5C

c) 1x 16sq.mm 2C

Supplying of luminaires which are as follows A)TMC 501 P 2xT-LED incl.mounting rail for TLED lamps (Philips/Havells/C&G)

B)TMC 501 P 1xT-LED incl.mounting rail for TLED lamps….(Make..Do)

C)TLED Essential tube 1200mm..1600 Lumen 20w(Philips)

D)Supply & fixing of ceiling fan 1200 mm(48") IS 374:2019 withBLDCmotor, incl down rod upto 300mm,minimum air delivery 210m3/min 3star BEE rating with service value >4.1 to<5.1,Orient Quasar,crompton greaves aqua prime,Havells, or equivalent make

S& F 12" (300mm) sweep,1420 RPM exhaust fan(Make: EPC heavy duty, after making hole in wall & mending good damages & smooth cement finish …withnecy bolts & nuts(6mm dia x62mm long) and louvre shutter.

Inter connection between BBC to SFU incoming by HRFR pvc insulated flexible unsheathed copper conductor of following cross section 1x70sqmm

connecting the equipment to earth busbar incl S& F GI wire of size as below on wall staples inside wall as reqd & making connection with equipments with nut bolts etc & mending good damages. 10SWG

S & F earth busbar of galvanized MS flat of 25x6 mm on wall having clearence of 6mm incl providing of drilled holes…….as required

CITY ELECTRIC CO (BID ID -6817551)

KUNDU ELECTRICALS (BID ID -6820598)

MUKHERJEE ENTERPRISE (BID ID -6818635)

ELECTRO EQUIPMENTS TRADING CORPORATION (BID ID -6817002)