SPECIAL REPAIRS TO BLDG NO P/1-3/F SERVANT QTRS NEAR KV SCHOOL IN RA AT CAD PULGAON

Amount

Taking down chowkats or frames with shutter w/o taking off shutter from the frame nexc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) and removing salvage to a distance not exc 50 m complete all as specified and directed By Engr-in-charge.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr all as specified and directed By Engr-in-charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material outside the premises all as specified and directed By Engr-in-charge .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed By Engr-in-charge.

Dismantling of ceiling board(Fibre,pulp,,insulation etc) or insulation board / slabs/any thickness including cover fillets all as specified and directed By Engr-in-charge

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Unframed work complete all as specified and directed By Engr-in-charge

M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and directed By Engr-in-charge.

S&F Aluminium anodized barrel tower bolts, 150mm long all as specified and directed By Engr-in-charge.

S&F extruted aluminium alloy handles fabricated type anodised size of handle 150mm all as specified and directed By Engr-in-charge.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.complete all as specified and directed By Engr-in-charge.

S & F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gate, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, bolt, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S & F of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S&F pressed steel frames 125x60mm for doors with one or more rebated incl, necessary fixing lugs hinges lock strike plate etc completeall as specified and directed By Engr-in-charge .

M&L Cement concrete type C-0 (1:3:6) using 12.50 mm graded stone aggregate as in filling in pressed steel chowkhat,fixing of hold fast etc complete all as specified and directed By Engr-in-charge.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed..

S&F 2nd class hardwood 35mm thick plain framed factory made panelled shutter (two panels) with lock rail and panel of 9mm B.W.P commercial ply of 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS : 1003 (part 1) klin seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed & skeleton factory made shutters open rebated & prepared to received glass, gauze etc (without sash bars) edges of & mitred beads for securing glass etc complete all as specified and directed By Engr-in-charge.

S&F steel windows with side hung shutters including projected type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, with guard bars complete all as specified and directed By Engr-in-charge.

Ditto, but without glazing bars.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for preparation of Old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of Old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F of 150 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 450 mm X 300 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10 mm thick CM 1:4 all as specified. complete all as specified and directed

M & L for providing 40 mm thick cement concrete 1:2:4 (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed..

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed (1:6) CM complete all as specified and directed.

M&L 9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

S&F prepainted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminum zink coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Dismantaling of stone slab and tiles description or thickness or thickness in floor laid bedded and pointed in any mortar etc. complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:6 complete all as specified and directed.

S & F 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed

S&F in repair Bib tap long body cast copper alloy with chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified.

S&F in repair angle valve cast copper fancy type chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified.

S & F of in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & Fin repair rotational moulded polythylene water storage tank with float valve, plastic lid cover, tripple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs incl making connections complete all as specified.

Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.

S&F 15 mm dia galvanized pipes medium grade with all fittings concealed in wall and fixed complete wall and ceiling or laid in floors.

S&F 20 mm dia galvanized pipes medium grade with all fittings concealed type fixed complete to wall and ceiling or laid in floors.

Fixing only 15 mm dia tubes, any grade, to walls concealed fitting and ceilings or laying in floors

Fixing only 20 mm dia tubes, any grade, to walls concealed fitting and ceilings or laying in floors

S & F in repair stain less steel kitchen sink made out of 1mm thick sheet including stainless steel waste fittings and pvc waste pipe of 40mm dia . The over all size of sink 915x460mm and bowl size 410x330x160mm fixed with brackets or ms angle or GI pipe 15mm dia with proper arrangments to hold and fitting of sink complete all as specified and directed at site.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

S&F in repair PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia all as specified

S&F in repair PVC SWR pipes 75 mm bore single socketed including bend, tee etc. in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair face of stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

M&L preparation of new or old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty on new plastered surfaces of wall complete all as specified.

M&L for preparation of new or old plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick wall surfaces finished even and smooth with out using extra cement all as specified.

S&F in 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed at site.

S&F in repairs tubular towel rail 20mm dia, D type, 60cm long between flanges aluminum anodised all as specified and directed at site.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete.

M & L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection/path laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

100mm thick PCC (1:4:8) type D-2 (using 40mm gradded crushed stone aggregate) as in sub base complete all as specified and directed.

Taking down carefully concealed/ casing capping point wiring copper / aluminium (light / fan / scoket) complete (with fittings such as switches ceiling rose, pendents, regulators sockets etc) and making good disturbed surface with exisitng specification all as specified and directed by Engr-in-Charge.

Material and Labour point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing capping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the One light point controlled by one switch one way.

All as per item No 66 above but for One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

All as per item No 66 above but for One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

All as per item No 66 above but for One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

All as per item No 66 above but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size

Material and Labour for point wiring with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and unsheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and directed.

Material and Labour switch piano flush type single pole,one way, 6 Amps, 240 V complete all as specified and directed including taking down old U/S one. Make : Anchor/Havells/Cona

Supply and fixing socket outlet 5/6 pin type,6 Amps, 240 V complete all as specified and directed including taking down old U/S one . Make : Anchor/Havells/cona

Supply and fixing switch socket combination flush type (multipurpose type) but 6 Amp, 240V complete all as specified and directed including taking down old U/S one. .

Supply and fixing switch socket combination flush type (multipurpose type) but 3 pin 16 Amps, 240V complete all as specified and directed including taking down old U/S one. .

Supply and fixing ceiling rose surface type with 3 terminals complete including taking down old U/S one all as specified and directed at site. .Make : Havells/SSK/Cona

Supply and fixing fan regulator electronic step type AC 240 Volts,50 Hz complete including taking down old U/S one all as specified and directed at site. . Make : Anchor/Cona/Havells

Supply and fixing lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed including taking down old U/S one all as specified and directed at site.. .Havells/SSK/Cona

Supply and fix Bell push, flush type, 5 amp complete all as specified and directed including taking down old U/S one all as specified and directed at site.. Make : Havells/SSK/Cona

Supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole all as specified and directed including taking down old U/S one all as specified and directed at site. Make : Havells/SSK/Cona.

Supply and fixing LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) all as specified and directed including taking down U/S old any type of TL fitting all as specified and directed at site.. Make Havells /Philips/Bajaj .

Supply and Fix to wall / pole of any height LED bldg security light 25 watt IP 65/66 including GI pipe suitable size bracket not less than 1 metre bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete including taking down u/s lights all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed.

Material and Labour for sub main wiring alongwith earth wire with the 2 run of 6 sqmm PVC FRLS copper cable and 1run of 6 sqmm PVC FRLSH copper cable for insulated copper conductor, single core cable in PVC Casing caping 20 mm complete all as sfecified and directed Note for sub main wiring :- 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM 2. Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire

Supply and fixing in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN,4 way with 200 amps rated bus bar 240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces all as specified and directed at site.. Make : Havells/legrand/Schneider

Supply and fixing in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN,8 way with 200 amps rated bus bar 240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces all as specified and directed at site.. Make : Havells/legrand/Schneider

Supply and fixing in replacement 32 Amp , 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN in the MCB DB complete with connection testing and commissioning all as specified and directed at site.. Make:Havells/Legrand/Schneider

Supply and fixing in replacement 6-32 Amp , 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP in the MCB DB complete with connection testing and commissioning all as specified and directed at site..Make:Havells/Legrand/Schneider

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core including taking down old one all as specified and directed at site.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 metre depth for foundation, laying of cables/pipes/poles etc., and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Supply and lay, dry river sand filling in trenches to required width at bottom and top of cable as cable cushioning including spreading, leveling, watering and consolidation complete all as specified and directed.

Supply and laying brick sub class "B" having minimum compressive strength 75 kg/sqcm laid in trenches for cable protection etc complete all as specified and as directed.

Supply and lay pipe galvanized, “light grade ”, including fittings 25 mm dia (Cable Protection Pipe) all as specified and directed at site.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC 1:2:4 type-B1 chamber, RCC 1:2:4 type- B1 cover slab with 8mm dia TMT bar 100mm centre to centre both ways, char coal, comman salt, wire mesh lugs, earth lead protection pipe 15mm bore, medium grade 7.5m long, 20 mm bore medium grade watering pipe with wiremess water funnel as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified.

Supply and Fix in replacement of 9 Watt LED Bulb retrofit type complete all as specified and directed. Make : Havells/ Bajaj/Philips

M/S Ramakant Chourasia

M/s Prakash Agencies

M/s Dara Constructions, Pulgaon

Ankit Construction

MAHARASHTRA ENTERPRISES

Rehal Construction

M/S JAI BHAWANI CONSTRUCTIONS

SHRI RANI SATI TRADERS

Bidder Name

Rehal Construction

Ankit Construction

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

M/S Ramakant Chourasia

MAHARASHTRA ENTERPRISES

M/s Dara Constructions, Pulgaon

M/s Prakash Agencies

M/S JAI BHAWANI CONSTRUCTIONS