REPAIR TO FENCING, FOOTPATH, GATE, SECURITY WALL AND DRAINS AT JANGLOTE UNDER GE BASOLI

Amount

M & L rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces then applying two coats cement base paint on walls over a coat of white wash complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2, using (40mm graded crushed stone aggregate) as in sub base for drain and chequred tiles, finished even and smooth complete all as specified and as directed.

M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including 15mm thick screed bed of 1:4 cement mortar over sub base, complete all as specified and directed. NOTE:- The sub base shall be paid separately vide item 2 above.

Demolition of cement concrete unreinforced in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for walling of random rubble masonry, uncoursed well bonded, bedded and solidly hearted built in CM 1:6. Complete all as specified and directed.

All as per item No.5 above, but except stone, complete all as specified and directed. NOTE:- The old stones obtained from demolition shall be reused in the work as directed by engineer in charge.

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 . complete all as specified and directed.

All as per Item no 7 above but except bricks. Complete all as specified and as directed. NOTE:- The old bricks obtained from demolition shall be reused in the work as directed by engineer in charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. Complete all as specified and directed.

All as per Item no 9 above but except bricks, complete all as specified and directed. NOTE: - The old bricks obtained from demolition shall be reused in the work as directed by engineer in charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed by Engineer-in-Charge

M & L Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement and preparation of newly plastered or un-plastered surfaces and applying two coats of white wash. Complete all as specified and as directed by Engineer-in-charge.

S&F flush pointing to random rubble walling uncoursed in CM (1:3) complete all as specified.

S&F Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (12.50 mm graded aggregate) as in coping, plinth band ,bed block including rounded or chamfered angle as directed including necessary formwork, complete all as specified and directed.

S&F mild steel TMT bars 10mm dia & over cut to length bent to shape required all as specified as in reinforcement, complete all as specified and directed.

Dismantling fencing and post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground. Complete all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in as in foundation and mass concrete work, Complete all as specified and directed by Engineer-in-charge.

S&F Posts & struts of MS angle iron in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc flat iron fillets(for securing wire mesh)) including all necessary drilling bolting or riveting etc. complete all as specified and directed.

M&L painting the surfaces of steel any description over 10cm in width or girth, with two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surface, complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description not otherwise specified over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Supply and fix for Mild steel galvanized chain link of mesh size 50mmx50mm and thickness of line wire 3.80mm dia including fixing with straining bolt, binding wire etc , complete all as specified and directed by Engineer-in-charge.

S&F MS round bars 12mm dia for strengthening of chain link fencing, complete all as specified and directed.

S&F of mild steel screw bolts with hexagonal or square heads at one end and screwed the other end or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm and n.exc 10 cm, complete all as specified and directed.

S & F of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks, heavy, for large gates, hook and pintle hinges; large hasps and stables; chains; handmade sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. Complete all as specified and directed.

M & L for surfaces of any description, n.exc 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surface when unconnected with other painting or when painted in a different tint, Complete all as specified and directed.

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc exceeding 200mm thick, complete all as specified and as directed.

M&L for reinforced cement concrete M-20 (Nominal mix) type A1 (1:1 1/2 : 3) using 20mm graded crushed stone aggregates as in roof slab of culvert, supported on walls, beam and columns in floors, and in shelves and etc, complete all as specified and as directed.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc, and getting out in hard /dense soil, complete all as specified and as directed.

M&L Cement Concrete in foundation filling and mass concrete of mix 1:3:6 type C-2 (40mm graded aggregate) as in bedding and hunching, complete all as specified and as directed.

M&L for Reinforced concrete pipes class NP-3, 600mm dia laid in trenches and jointed on concrete bed, complete including testing etc. complete all as specified and directed. (Note: - Concrete bed shall be measured and paid separately)

Removal of excavated soil up to 50m distance, complete all as specified and as directed.

MANOTRA BUILDER

Ashoka Engineers

M/S HARBANS SINGH BEDI

M/s. Jaswant Singh Govt Contractor

BALKRISHAN GUPTA AND SONS

Anjali Stone Crusher