Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | L1 | Accepted-AOC Awarded |
Tender Value
₹4.7 L
EMD Value
₹9,400
Closing Date
21 Dec 2020, 3:00 pmClosed
Director of Lighthouses and Lightships
Directorate of Lighthouses and Lightships, 44 B.S.Road, Deep Bhawan, Port Blair
Major overhauling of 20 KVA Kirloskar Green DG sets of HA 394 series (Canopy Type) at Keating Point Lighthouse and DGPS station, Car Nicobar, A and N Islands.
2020_DGLL_579948_1
AN/MQ(3)/2020
Open Tender
Support/Maintenance Service
Works
60 days
Keating Point Lighthouse, Car Nicobar
As per tender document
11 documents required · 11 mandatory
₹0
₹9,400
Yes
Deep Bhawan, Port Blair
10 Aug 2021
28 Aug 2020
23 Dec 2020
28 Aug 2020
21 Dec 2020
28 Aug 2020
28 Aug 2020 - 7 Dec 2020
8 Dec 2020
Amount
M.073.4.00.013/Main Bearing 10U/s
W.073.7.00.003/Main bearing Thrust Washer
03.006.02.0.00/Cam Shaft Thrust washer
02.536.10.0.00/Idle Gear
03.010.50.0.00/Lub oil pump Assly
02.002.10.0.00/Oil Spray zzle
03.750.01.0.00/Lub oil cooler
03.020.02.0.00/Union Screw
B.073.4.00.013/C.R. Bearing 10u/s
02.443.50.0.00/Piston Assembly
02.020.40.0.00/Piston ring
02.019.04.0.00/Cylinder Liner
02.019.03.0.00/Shim ring
04.692.03.0.00/Con Rod Bolt
04.291.06.0.00/Intermediate ring 1.3mm
06.292.01.0.00/Intermediate ring 1.1mm
02.637.01.0.00/V belt SPZ AVX10 1564
02.022.03.0.00/Cylinder head bolt
02.022.04.0.00/Washer (Cylinder head bolt )
04.296.01.0.00/Fuel filter cartridge
03.063.02.0.00/Hose for Air cleaner
F6.377.16.0.00/T bolt Clamp
38.156.02.0.00/Fuel pipe
48.129.01.0.00/Fuel pipe
34.250.01.0.00/Flexible pipe L.O.P
02.525.06.0.00/Fuel hose
02.525.10.0.00/Combined leak off pipe
50.907.01.0.00/Constant clip
03.723.90.0.00/ of High.P.Pipe
04.304.02.0.00/Lub oil supply hose
03.660.07.0.00/Special Banjo bolt
34.030.05.0.00/Banjo bolt FIP
34.032.60.0.00/Overflow valve
03.248.20.0.00/zzle leak off pipe
06.718.11.0.00/Fuel pipe inlet
F6.708.12.0.00/Fuel pipe Return
03.135.60.0.00/Sub Assly fan body
03.019.05.0.00/Rubber Grommet
03.022.02.0.00/Rubber Grommet
02.029.04.0.00/Rubber Grommet
03.485.10.0.00/Assembly of Hot air ducting
02.024.70.0.00/Push Rod
02.024.33.0.00/Push Rod Tube Cover
02.024.04.0.00/Spring
02.024.03.0.00/Sealing ring cap
02.024.01.0.00/Valve Tappet
02.663.10.0.00/Fuel Pump Stop Soleid
46.390.01.0.00/Alternator 12, 35A
03.360.20.0.00/Wiring Harness
06.087.02.0.00/Temp. Switch Head
2H.092.11.0.00/Lub oil pressure sendor
46.085.02.0.00/Sensor unit
03.035.02.0.00/Starter Ring
02.411.02.0.00/Dial Type Mechanical fuel level gauge 95mm
46.084.01.0.00/Elec. LOP Temp.Gauge
46.250.01.0.00/Elec. LOP Gauge
49.135.03.0.00/On/Off Switch
02.424.02.0.00/ESU unit 12/24v
02.544.04.0.00/Hose Fuel filling
30.650.02.0.00/Hose clamp
34.036.60.0.00/Cap Assly
34.107.06.0.00/Joint for adaptor
3H.160.17.0.00/Joint for exhaust silencer
02.538.10.0.00/Exhaust Silencer
50.508.14.000/Washer
50.003.08.025/Bolt-8x25
50.003.08.020/Bolt 8x20
03.068.10.0.00/ of joint
03.069.10.0.00/ of Rubber 'O' ring
82.060.10.080/K-Sealant
03.274.01.0.00/Anti Vibration Mounting pad
Cotton waste
Fuel pump element
Delivery valve
Ball bearing
04.265.01.0.00/“O”-Ring for fuel pump
02.445.10.0.00/valve
06.631.01.0.00/valve guide
02.445.04.0.00/valve seat inlet
04.684.02.0.00/valve seat exhaust
06.631.02.0.00/valve seal
02.022.13.0.00/valve spring
02.022.12.0.00/valve collect
Asbestos rope-6mm
Service Charges for fuel injection pump calibration & Testing
Service Charges for Injector calibration & pressure testing.
Service Charges for replacing the SE bush (Lathe Work)
Service charges for crank shaft grinding and polishing (Lathe work)
Service Charges for cylinder head decarbonising (03 )
Service Charges for Battery Charger Alternator servicing
Service Charges for self starter Complete servicing
Service Charges for 65Ltrs capacity fuel tank cleaning
Service Charges for removing the exhaust system, cleaning and refitting the same.
Service Charges for replacing all defective sensors, gauges and checking all engine safety wiring connections. Starting and Testing the DG on Load condition found performance satisfactory.
Service Charges for Major overhauling of 20KVA DG of HA394 series. Complete dismantling the engine. Checking and cleaning all the spare parts and reassembling the engine with new spare parts, checking the bumping clearance, fuel timing and valve tappet clearance after Starting and testing the DG without load & on Load condition.
Charges for boarding, Lodging and conveyance for service engineer.
Transportation Charges of materials from Port Blair to DGPS station, Car Nicobar.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .