PROVISION OF 03 X HIGH MAST LIGHT AT MT AREA AND TRAINING AREA UNDER GE(U) BATHINDA.

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line, cable trenches etc not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.

Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 25 Sqmm 3.5 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed.

Material & labour sand cushioning using clean Fine River sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and directed. ( Note:- Punned thickness shall be considered for payment purpose)

Supply and laying well burnt sub class B breicks old size bricks, laid flat dry, in trenches with width of the bricks laid to the axis of cable for cable protection complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply, instalation, commissioning and testing of 16.00 meter high 20 sided polygon highmast lighting system fabricated made out of BS-EN 10025 or equivalent 355 Mpa material in two sections, hot dip galvanised (single dip) internally & externally having uniform coating thickness of 85/65 micron for bottom & top section respectively as per BS 729 and with one longitudinal weld and having no circumferential weld suitable for wind veleocity of 180 Km/hr as per IS-875 (Part-3) duly provided with accessories like head frame, steel wire rope 6mm dia (7/19 construction with central core SS) trailing cable double drum winch, galvanised lantern carriage arrangement suitable for 09 luminaries symmetrically and manufacures design / details complete all as directed. Note:- The quoted rate against this item shall be inclussive of the following :- (i) Providing of foundation bolts manufactured from special steel alongwith nuts, washers, anchor plates and templates etc. as required as per manufactures recommendations. (ii) Erection and commissioning of high mast with the help of suitable equipments and wiring of luminaries with all copper conductor, cable of suitable size & providing flexible steel conduit pipe 3/4" for protection of cable. (iii) Providing of suitable shallow foundation with RCC (1:1.5:3) or as per manufacturer's instruction for high mast pole foundation. (iv) Providing of suitable foundation with RCC (1:1.5:3) or as per manufacturer's instruction for panel . (v) Supply and fix aviation obstraction light - LED type - 01 No. (vi) Supply and installation of control panel (made out door, double door) with auto control timer switch unit with digital time switch of capacity 32 Amps tripple pole MCB incommer housing suitable for operation of mast including suitable control circuit for power tool motor. (vii) All necessary excavation and earth work in any type of soil including returning, filling and removal of surplus soil to distance not exceeding 50 meter for high mast pole and panel foundation.

Supply and fixing high efficient integral type LED TURBO flood light 120 watt made of pressure die cast housing with lens and enclosed with toughened glass, IP 66, IK 07 Protection with 120 watt LED lamp including making electrical connection complete all as directed.

Supply and laying or fixing GI tubing light grade 50 mm dia for cable protection including fitting under road / across the drain or nallah / laid in trench complete all as specified and directed.

M&L for making the horizontal boring under road and hard standing suitable for laying and inserting pipe upto 80 mm dia any length by mechanical drill system or Auger system and making the surface good as existing surface complete all as specified and directed. Note: GI pipe shall be measured and paid separately under respective item.

Supply and laying GI tubing, light grade, 80 mm bore complete with all fittings for cable and earth continuity strip protection laid in trenches/fixed to poles/along wall/under road/across the drain complete all as specified and as directed.

M&L for cable route indicator from 40x40x6 mm angle iron 450 mm long ,riveted or welded with 100 mm dia CI or MS round disc duly engraved 'LT CABLE " in letters & 'BROWN' colour including grouted into the ground with PCC (1:4:8), type D2 using 40 mm graded crushed stone aggregate minimum size of PCC 20cmx20cmx30 cm complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including 25 x 4 mm GI strip upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009.

SATTYAM BUILDERS

UNITED ENGINEERING CORPORATION

PREM ENTERPRISES