PROVN OF STORAGE SPACE, COVERED SHED PARKING AND TOILET BLOCK FOR CWE PANAGARH UNDER GE (P) PANAGARH

Amount

Suface excavation n exc 15 Cm deep in soft /loose soil all as specified & as directed by the Engr- in- charge

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, n exc 10 sq m on plan and getting out in soft/lose soil all as specified & as directed by the Engr- in- charge

Returning, filling in sort/loose soil incl speading ,levelling, watering, and well ramming in layer not exc 25 cm thick all as specified & directed by the Engr- in- charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a leval not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

M &L for PCC (1:4:8) type D2 using (40 mm graded stone aggregate) in foundations, filling and mass-concrete all as specified & as directed by the Engr- in- charge

M&L for form work rough finished surface to sides of concrete foundations,footings,bases of column,raft and raft beam , side and soffits of foundation and plinth beam and similar work vertical or to batter all as specified & as directed by the Engr- in- charge

M&L for RCC M 30 design mix for foundation,incl footings,foundation beams,plinth beams,bases of column etc and mass concete all as specified & as directed by the Engr- in- charge

M&L for fom work rough finished to sides and soffits of roof beam,girder,beam haunching,lintels,cantilevers,etc all as specified & as directed by the Engr- in- charge

M&L for RCC M30 design mix for beams,cantileves,lintel over 1.5 m span all as specified & as directed by the Engr- in- charge

M&L for form work to sides of pillars, posts,struts,columns and stanchions rough finished square or rectangular section all as specified & directed by the Engr- in- charge

M&L for RCC M 30 design mix for columns,pillars,posts and struts all as specified & directed by the Engr- in- charge

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending,spirally fo hooping fo hooping for columns,incl mild steel wire annealed not less than 0.9 mm dia securing with clips all as specified & directed by the Engr- in- charge.

All as per item no 10 above but as in stirrups,spaces and binders all as specified & directed by the Engr- in- charge

M&L for form work to soffit of suspended slabs such as roof slabs,floor slabs,landing and similar wok all as specified & directed by the Engr- in- charge

M&L for RCC M 30 design mix for slabs suppoted on wall/beams and columns all as specified & directed by the Engr- in- charge

S&F MS Rolled section FE 410-W(gde E-250)as in main and cross beam ,hips,and jack rafter,purlins where connected to common rafters and running rails and guide for doors,fixed with angle cleats or other connecting plate all as specified & directed by the Engr- in- charge

M&L for brickwork with old size sub class 'B' brick fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified & directed by the Engr- in- charge

M&L for brickwork with old size sub class 'B' brick fly ash bricksstraight or curved on plan to any radius in half brick wall built in CM 1:4 all as specified & directed by the Engr- in- charge.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by the Engr- in- charge.

M&l for rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrate wall surfaces & finishing the surfaces fair and even as per specified & as directed by the Engr- in- charge.

S&F rolling shutter without ball bearing , as specified including top cover anchoring rod, hasp & staple and one shop coat of primer errected in position incl all necessary fitting and fixing complete (lath thickness 1.25mm thick) all as specified & as directed by the Engr- in- charge.

S&F bands ,staps,or stay for rain water ventilating pipe ,incl bolts if required, hooks for large gates, hook and pintle hinge,hand made sliding bolt ,clamp,wall tie,plate washer and similar articles confirming to FE 290,GDE E-165 all as specified & directed by the Engr- in- charge.

M&L for prepretion of new steel surfaces of any description,over 10 cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engr- in- charge.

M&L for sand fine with tine sand under floors or in foundations incl watering and consolidation all as specified & directed by the Engr- in- charge.

M&L for plain cement concrete type B2 (1:2:4) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified & as directed by the Engr- in- charge.

M &L for 40mm thick DPC in cement concrete 1:2:4 type B0 all as specified & as directed by the Engr- in- charge.

M&L for rendering 15 mm thick in cm 1:6 on other than fair faces of brick work or concrate wall surfaces & finishing the surfaces fair and even all as specified & directed by the Engr- in- charge.

M&L for applying two coats of cement based paint over a coat of primer on wall surface including preparation of surface etc complete all as per specified & directed by the Engr- in- charge

M&L applying two coat of oil bownd distemper including preparation of surface on newly plastered chalk whiting on plastered wall surface etc complete all as specified & as directed by the Engr- in- charge.

M&L for three coat of white washing on ceillings incl preparation of surface all as specified & directed by the Engr- in- charge.

Supply only Waterproofing Compound all as specified & directed by the Engr- in- charge.

M&L 75mm thick PCC (1:3:6) for plinth prorection over rammed earth all as specified & directed by the Engr- in- charge.

M&L for 150 mm thick plain cement concrete (1:3:6) Type C2, as in paving (using 40 mm gradded stone aggregate) etc complete all as specified & directed by the Engr- in- charge.

M&L 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar (1:6) all as specified & directed by the Engr- in- charge.

M&L for Non skid joint free ceramic tiles 7to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as per specified & directed by the Engr- in- charge .

M&L 10mm thick rendering/screed bed on faces of brick or concrete surfaces for skirting/dado in Cm 1:3 all as specified & directed by the Engr- in- charge.

M&L Glazed ceramic coloured tiles 300x200X6 mm thick white or coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified & directed by the Engr- in- charge

S&F solid PVC Door frame of size 50X47 mm made out of 5 mm plain colour PVC sheet reinfoced with MS tube in opening as per specification and drawing all as specified & directed by the Engr- in- charge.

S&F factory made solid PVC door shutter 30 mm thick (Style) consisting of frames made out of MS tubes for top and bottom rails MS frame shall be covered with heat noulded plain colour PVC with solvent cement for tiles and plain colour PVC sheets for top rail and bottom rail panellng of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheets beading and jointing together with solvent in the frame at site as per specification and drawingall as specified & directed by the Engr- in- charge.

M & L butt hinges medium weight cold rolled mild steel of 100 mm size all as specified & directed by the Engr- in- charge.

S&F aluminium handles cast type, anodised of 125 mm size all as specified & directed by the Engr- in- charge.

S & F aluminium anodised, barrel tower bolts of extruded section of 200 mm size all as specified & directed by the Engr- in- charge.

S&F 150 mm long aluminium anodised, sliding door bolt etc all as specified and directed by the Engr- in- charge.

S&F steel windows with side hung shutters incl projecting type hinge with steel handle and steel peg stay ,complete with glazing bars,dovetailed or welded all as specified & directed by the Engr- in- charge.

S&F steel ventilator with top hung shutter incl hinges steel peg stay,complete all as specified & directed by the Engr- in- charge.

M&L for APP based polymeric membrane minimum wt 3 kg/sqm and min 3 mm th reinforced with polysister non oven fabric(wt not less than 150 gms)laid on primed surface by torch application complete all as specified & directed by the Engr- in- charge.

M&L for heavy duty tiles 300X300X10 mm thick over screed bed all as specified & directed by the Engr- in- charge.

S&F steel water tubing galvanised medium grade 15mm bore with all fitting fixed to walls or laid in floor complete all as specified & directed by the Engr- in- charge.

All as per item No 47 here in before but 20mm bore all as specified & directed by the Engr- in- charge.

S&F 20mm bore stop valves fancy type chromium plated with long shank and cup (concealed type) cast copper alloy , any colour screwed down , high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified & directed by the Engr- in- charge.

S&F 15 dia Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed,for GI pipe all as specified & directed by the Engr- in- charge.

S&F 15 dia pillar tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed,for GI pipe all as specified & directed by the Engr- in- charge.

S&F PVC valveless syphonic action type flushing cistern low level 10 ltrs capacity white with inlet, ball valve, float, handle and other all accessories as in repair all as specified & directed by the Engr- in- charge.

Supply and fix vitreous china squating pan Orrisa Pattern, Size 580mmX440mm white, with integral foot rest (excluding flushing cistern ,flush pipe ) complete.all necessary fitting all as specified & directed by the Engr- in- charge.

S&F flush pipe incl all joint all as specified & directed by the Engr- in- charge.

S&F vitreous china urinal ,half stall type(back or corner wall type) all as specified & directed by the Engr- in- charge.

S & F vitreous China Ware Wash hand basin coloured, flat back, size 630 x 450 mm size including brackets, cutting for and pinning ends of brackets or erecting stand and brass union with PVC discharge pipe all as specified & directed by the Engr- in- charge.

S&F glass shelf consisting 5.5 mm glasswith backet all as specified & directed by the Engr- in- charge.

S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of lenth 450 mm all as specified & directed by the Engr- in- charge.

M &L for Cast iron floor trap 75 mm dia all as specified & directed by the Engr- in- charge.

M &L for Cast iron nahani trap 75 mm dia all as specified & directed by the Engr- in- charge.

S&F 75mm PVC (SWR) bend with access door all as specified & directed by the Engr- in- charge.

S&F 75mm PVC (SWR) bend all as specified & directed by the Engr- in- charge.

S&F 75mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor all as specified & directed by the Engr- in- charge.

S&F 110mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor all as specified & directed by the Engr- in- charge.

S&F 32mm LDPE pipe of pressure rating 6 Kg/Sqm cm laid in floor all as specified & directed by the Engr- in- charge.

S&F PVC bends of any radious 110 mm boe all as specified & directed by the Engr- in- charge.

M &L for S&F PVC junction T equeal 110 mm bore all as specified & directed by the Engr- in- charge.

S&F PVC vent cowl 110 mm bore all as specified & directed by the Engr- in- charge.

S&F Plastic water tank 1000ltr capacity with all necessary fitting like ball valve etc all as specified & directed by the Engr- in- charge.

M&L for percast RCC cover slab type B1, 1:2:4 set in CM 1:4 (150mm thick) all as specified & directed by the Engr- in- charge.

M & L for making the extention of 40 mm dia for taping water from exsisting 50 mm dia GI tubing by cutting screwing threads on new or old pipes complete all as specified and as directed.

M & L for medium grade Galvanised pipes with all fittings such as reducers, bends, elbow, unions, nipples etc of following sizes complete all as specified and directed:-

40 mm dia bore.

25 mm dia bore.

20 mm dia bore.

M & L for Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed following sizes complete all as specified and directed:-

40 mm dia bore.

25 mm dia bore.

20 mm dia bore. Make

S & F ball valves high pressuer of PTMT with epoxy coated Aluminium rod & higher density plastic ball screw for iron pipe and fixed of size 25 mm dia bore complete all as specified and directed.

M & L Construction of brick masonry chamber of 60 cm x 60 cmx 60 cm [internal dimensions] suitable for 25mm/50mm bore sluice valve with PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation brick wall with sub class ‘B’ brick, old size built in CM 1:6 PCC [1:2:4] type B1 [using 20 mm graded stone aggregate for coping rendering in CM [1.4] 15 MM thick including provision of MS sheet cover 3 mm thick with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangement including necessary excavation and earth work in any type of soil complete all as specified and directed.

Supply and laying the well burnt bricks sub class'B' (Fly ash bricks) laid flat in trenches for Protection of cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed.

M & L for for Point wring in consealed conduit with 1.5 Sqmm insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn through PVC conduit through wall (CONCEALED) for fixing of switches/sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor cable continuity and connecting to common earth dilly complete all as specified and directed:-

one light point controlled by one switch

one Ceiling/Exhaust Fan point controlled by one swtich

one socket point 6 Amps on same board

one socket point 6 Amps on the independent board

Material and labour for point wiring for one socket point controlled by one switch with 2.5 Sqmm PVC insulated unsheathed single core multi -strainded copper cunductor cable 1100 volts grade confirming to IS - 694 drawn into and including PVC casing caping of suitable size with all accessories fixed on wall / ceiling and terminating in and including PVC box and 2.5 Sqmm PVC insulated unsheathed single core multistrainded copper cunductor cable 1100 volts grade for earth continuity conductor and connecting to common earth dolly complete all as specified & directed.

Supply and fixing modular switch 1 way 6 Amps, 1 modules 230 volts.

Supply and fixing modular switch 1 way 16 Amps, 1 modules 230 volts.

Supply and fixing modular socket 6A, 2/3 pin combined, 2 modules 230 volts.

Supply and fixing modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts.

S &F ceiling rose 3 pole/PVC/polycarbonate isoloted body complete all as specified and directed.

Supply and fixing modular white cover plate with frame 3 modules.

Supply and fixing modular white cover plate with frame 4 modules.

Supply and fixing modular white cover plate with frame 6 modules.

Supply and fixing modular Metal flush box 3 modules. Make: Havells/Anchor/Legrand

Supply and fixing modular Metal flush box 4 modules.

Supply and fixing modular Metal flush box 6 modules.

Supply & fix LED tube light surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, 20 W complete all as specified and as direected. Make: Havells Cat No: ENDURALINEARNEOBS20WLED830SPCWH or equivalent in Bajaj/Philips.

Supply and fix energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection 25 W complete with clamp bolts all as specified and as directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOP or equivalent in Bajaj/Philips.

Supply and fix energy saving and environment friendly long life, surface mounted, decorative oval bulk head LED luminaire comprising of high brightness LEDs complete all as specified and as directed. Make: Havells Cat No: RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Bajaj/Philips.

Supply and fix energy saving and environment friendly opal glass wall mounted LED mirror light with IP66 protection 8 W complete all as specified and as directed. Make: Jaquar Cat No: KWB-CHR-MB12021172A or equivalent in Bajaj/Philips.

M & L for angle Holder PVC type with cord grip cap suitable for pendent fittings complete all as specified and directed.

S & F MCB, DB, S P & N, 240 Volt 8 way with double door complete all as specified and directed. Make: L&T/Havells/Legrand

S&F MCB SPN 6 to 32 Amp, 240 Volt complete all as specified and directed. Make: L&T/Havells/Legrand

S&F MCB SP 6 to 32 Amp, 240 Volt complete all as specified and directed. Make: L&T/Havells/Legrand

Supply & fix exhaust fans heavy duty, AC single phase 240 V of size 380 mm, sweep, 1400 rpm complete all as specified and as directed. Make: Havells Model:- 300 mm - 1400 rpm. Or equivalent in Bajaj/Crompton.

Supply and fix auto hand dryer complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix auto soap dispencer complete all as specified and as direted. Make: Jaquar or equivalent.

S & F water heater storage type of capacity 25 Ltrs, 3 star rated, operated in electricity 230 Volt, 50 Hz with making suitable aggangement for fixing to wall including making electrical & water line connections complete with acessories and including civil work complete all as directed. Make- Bajaj, Shakti or equivalent.

S & F chromium Geyser connecting pipe complete all as directed.

S & F GI pipe 15 mm bore fixing on wall with clamp and all acessories complete all as directed.

S&F stop valve of fancy type chromium plated complete all as directed.

Earthing complete with GI earth plate electronic 600 x 600x 6mm burred directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etcincluding testing complete all as shown in electrical plate No 3 of MES Schedule Part I, all as specified & as directed .

subash chander bahl

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

ANSH CONSTRUCTION

FRIENDS CONSTRUCTION

Hooghly Construction Co.

M/S SWAPAN KUMAR MONDAL

Palak Infracon