PROVISION OF TOILET AND ASSOCIATED WORKS IN OPS COMPLEX AT AF STN MEMAURA

Amount

Excavation in trenches, in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation etc or for shafts,wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m depth and getting out complete all as specified and directed.

M&L for Cement Concrete PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed

M&L for ATT treating the backfill in contact with the foundation at the rate of 7.5 Litre of emulsion per square metres of surface area complete all as specified and directed.

M&L for ATT treating the top surafe of fiiled earth at the rate of 5Litre of emulsion per square metres of surface area.

M&L for Form work to fair finished surface of sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for form work to fair finished surfaces of sides of pillars, posts, struts, piers, coloumns and stanchions complete all as specified and directed.

M&L for formwork to fair finished surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floors and beams, etc complete all as specified and directed

M&L for form work to to fair finished surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed

M&L for RCC M-25 (desing mix) (20mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-25 (desing mix) (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed

M&L for RCC M-25 (desing mix) (20mm graded aggregate) in beams, cantilevers, bressurmmers, lintels over 1.5m span complete all as specified and directed

M&L for RCC M-25 (desing mix) (20mm graded aggregate) in Chajjas all as specified and directed

M&L for RCC M-25 (desing mix) (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

M&L for mild deformed TMT steel bars 10mm dia and over, cut to lenght, bent to hsape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed

Ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders

M&L for hardcore broken bricks of gauge n exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface

M&L for 40 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) in sub floors, sub bases of floors finished surfaces of concrete even and rough to receive screed bed/topping layer etc complete all as specified and directed

M&L for returning,filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete as specified and directed.

M&L for removing excavated meterial exc 250m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point

M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6 all as specified.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.

M/L 15mm thick rendering in CM 1:4 with with water proofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. (Note- WPC Qty should be measured and paid to separately)

Supply only water proofing compound complete all as specified and directed.

Material & labour for rendering 5mm thick in cm 1:3 as in ceiling/concrete surfaces finished even & fair faces complete all as specified and directed .

Material & labour for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M & L for preparation of newly plastered surface by affixing 3mm thick wall care putty and applying two coats of 100% premium acrylic emulsion paint in SIGMA-III camouflaging pattern having VOC less than 50 gm/lit and UV resitance as per IS 15489-2004 alkali and fungal resitance,dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over and including priming coat of exterior primer applied @0.9lit/10 sqm etc complete all as specified including necessary scaffolding arrangement and as directed by Engineer-in-Charge.

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc on roof surface and applying two coats of 100% premium acrylic emulsion paint in camouflaging pattern (Sigma MK-III pattern) having VOC less than 50 gm/lit and UV resitance as per IS 15489-2004 alkali and fungal resitance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over and including priming coat of exterior primer applied @0.9lit/10 sqm etc complete all as specified including necessary scaffolding arrangement and as directed by Engineer-in-Charge.

S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but n exc 0.38 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L galzed ceramic coloured joint free tiles on walls (vertical surfaces) etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 complete all as specified and as directed. etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection/ path laid in alternate panels 75mm thick finishing cement concrete surface even and smooth using extra cement complete all as specified and directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt of 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 250mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S&F aluminium powder coated ventilator of approved colour and made with section size 44mmX44mm X1.5mm thick including chequered grill 5 mm thick with wiremesh complete all as specified and directed.

Supply & fixing Johnson Wall Hung closet (JIS0303W0004) size 550 x 360 x 350 mm, 2D Rimless flushing, UF slim & soft close seat cover, stainless steel 304 grade hinges, quick release hinges complete all as specified and directed.

S&F Johnson Elite full frame concealed cistern (L0631FPC0000) complete all as specified and directed

S&F Johnson Elite Eclipse push plate (L0632EPC0000) complete all as specified and directed

Supply & fixing of H&R Johnson Tabletop Rectangular wash basin (JIS0305W20403) white of size 565 x 385 x 120mm including CP waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.

S & F Jhonson Archi urinal (P4319PW0704) white of size 225x280x510, white glossy type including all assembly kit, urinal waste pipe with suitable connector/coupling, urinal spreader etc complete all as specified and directed.

Supply & fixing rectangular frameless mirror 450 x 600 mm beveled edges suitable for bathroom, wall mounted silver complete all as specified and directed .

S&F PVC Connection 15mm size with PTMT nut of length 450 mm complete all as specified.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

Cutting Chases for concealed water tubing etc and making disturbed surfaces good in CM 1:3, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed.

Supply & laying of 16mm CPVC pipes SDR13.5 pipes & plain CPVC SDR 11 fittings in floors/walls/ceilingss complete all as specified and directed .

S&F 15 mm dia CPVC gate valves with plastic wheel head screwed both ends for CPVC pipe complete all as specified & directed.

S&F Johnson elite (T2602C3B) 15mm bore tall body pillar cock for wash basin chrome finish complete all as specified & directed.

S&F Johnson elite (JIT0210C) angle cock with wall flange chrome silver complete all as specified & directed.

S&F Johnson elite (JIT0013) concealed stop cock chrome silver complete all as specified & directed.

S&F Johnson elite (JIT0209C) Bip cock complete all as specified & directed.

S&F brass chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed.

S&F 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee,socket elbow,clamp etc complete all as specified and directed

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee ,socket,elbow,clamp etc complete all as specified and directed

S&F 110mm/125mm PVC(SWR) Gully Trap setting and jointed with solvent cement complete all as specified and dircted.

M&L for Cast iron Nahani trap of 75mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

M/L for 20mm thick machine cut Granite black /coloured of any type (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, partition wall of urinals/wash hand basin platform, and like in CM 1:4 inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including cutting , polishing and necessary bull nozing/ full round grinding complete all as specified & directed .

M&L salt glazed stone ware drain pipes laid jointed and tested complete of dia of pipe 150mm.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested bore dia of pipe 150mm in cement concrete type C-2(1:3:6)

M&L for point wiring with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade (ISI Marked) having dia. not less than 20mm with all fittings including MS galvanised pressed steel terminal sunken boxes of required module complete with frame plate and cover plate of required module for mounting modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly complete all as specified and directed for following:-

(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board with accessories

All as per item No 1 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

S&F Modular switch 1 way 6 Amp, 1 module, 240 volts, complete all as specified and as directed.

S&F Modular socket out let 3 Pin 6 Amp, 2 module, 240 volts, complete all as specified and as directed.

S&F Modular socket combination 2 in 1 , 3 pin 6 & 16 Amp, 3 module, controlled by one switch, 240 volt, complete all as specified and as directed.

S & F Modular white cover plate with frame 3 module. Complete all as specified and as directed.

S & F modular metal flush box 3 module. Complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded poly carbonate body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired, connecting up with 3 core twisted flexible copper conductor cable, including taking down old u/s fitting. complete all as specified and as directed.

S&F LED Mirror light fitting with high out put diffuser, 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including PVC insulated 3 core 1.5 sqmm copper cable from ceiling rose to exhaust fan. Complete all as specified and as directed.

M/S KAUSHIK CONSTRUCTION (BID ID -3119383)

Yaduvanshi Traders (BID ID -3112051)